• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권7호
• /
• pp.533-541
• /
• 1999

Multi-discharge type ozonizer(MDO) using superposed silent discharge has been designed and manufactured. It consists of three electrodes( central electrode, internal electrode, and external electrode ) and double gaps( gap between central electrode and internal electrode, gap between internal electrode and external electrode ). Therefore, ozone is generated by superposing silent discharges generated between the gaps respectively. And the MDO consists of three types of superposed discharge ozonizers according to voltage appling method for each electrode ; A.C. high voltages are applied two of three electrodes with phase difference of 180[˚], the other electrode is a ground. This paper describes that discharge and ozone generation characteristics of MDO which comprising central electrode and internal electrode applied A.C. high voltages with phase difference of 180[˚] respectively, and the grounded external electrode. As a result, the maximum ozone concentration, generation, and yield can be obtained 10208[ppm], 6.4[g/h], and 280[g/kwh] respectively.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.91-94
• /
• 1999

A new type of high-T$_c$ superconducting Josephson junctions has been prepared by Ar ion beam etching and electron beam lithography. YBa$_2Cu_3O_{7-x}$ (YBCO) films deposited on (001) SrTiO$_3$ single crystal substrate by pulsed laser deposition were patterned by Ar ion milling with photolithography. The narrow slit with a electroresist mask, about 1000 ${\AA}$ wide, was constructed over a 3 ${\sim}$ 5 ${\mu}$m bridge of a 1200-${\AA}$-thick YBCO film by electron beam lithography. The slit was then etched by the Ar ion beam to form a damaged 600-${\AA}$-thick YBCO. Thus prepared structure forms an S-N-S (YBCO - damaged YBCO - YBCO) type Josephson junctions. Those junctions exhibit RSI-like I-V characteristics at 77 K. The properties of the Josephson junctions such as I$_c$ R$_N$, and J$_c$ were characterized.

• Applied Biological Chemistry
• /
• 제31권3호
• /
• pp.219-225
• /
• 1988

Avian Sarcoma Virus의 plasmid DNA중(中)의 역 이사효소의 유전자(遺傳子)를 온도의존성(溫度依存性) 발현(發現) vector인 pPL-lambda에 cloning하여 온도(溫度)에 민감한 phage ${\lambda}$의 repressor인 cI857 gene을 갖고 있는 bacteriophage lysogen인 N4830에 transformation시켰다. transformant를 pL promoter의 발현(發現)을 억제(抑制)하는 저온(低溫)$(28^{\circ}C)$에서 배양(培養)시킨 뒤, 이 repressor를 억제(抑制)하여 transcription을 촉진(促進)하게 하는 고온(高溫)$(42^{\circ}C)$에서 배양(培養)시킨 다음 균체(菌體)를 회수(回收)하여 RNA를 추출(抽出)하고 분석(分析)을 한 결과(結果) 도입(導入)된 역전사 효소 유전자(遺傳子)의 전사(轉寫)가 고온(高溫)에서 증대(增大)되었다.

• 한국어병학회지
• /
• 제27권1호
• /
• pp.1-9
• /
• 2014

저수온기만 넙치에 대량 폐사를 일으키는 바이러스성 출혈성 패혈증을 폐사가 발생하는 $15^{\circ}C$, 폐사가 발생하지 않는 $20^{\circ}C$에서 인공감염시켜 넙치의 면역 유전자 발현 profile을 cDNA microarray 분석하였으며, 특히 저수온기에 폐사가 나타나는 원인을 면역 유전자 발현과 관련시켜 알아보고자 하였다. $15^{\circ}C$, $20^{\circ}C$의 감염 세포구에 공통으로 발현되는 유전자는 MHC class I, IL-8, myeloperoxidase 및 endonuclease G-like 유전자로 모든 세포표면에 존재하여 항원을 제시하거나 호중구 주화성을 자극하는 유전자들이었다. 항원 가공 및 제시, 항체 생성에 관여하는 MHC class II, immunoglobulin (Ig)과 retinoblastoma 등의 유전자는 $20^{\circ}C$에서는 발현이 증가하였으나 $15^{\circ}C$에서는 발현이 감소되었다. 이로부터 폐사가 발생하지 않는 $20^{\circ}C$는 바이러스 감염초기의 항원 제시, MHC class I과 II에 의한 항원제시, apoptosis 및 이후의 항체 생산이 정상적으로 이루어져 폐사가 발생하지 않는 것으로 생각되었다. 그러나 폐사가 발생하는 $15^{\circ}C$에서는 MHC class I매개의 항원 제시와 탐식 작용등의 선천 면역은 이루어지나 macrophage에 의한 MHC class II매개의 항원 제시와 apoptosis저하, 항체 생산 관련 유전자의 발현저하가 관찰되어 초기 macrophage에 의한 항원제시의 실패로 적응 면역이 제대로 활성화되지 않아 폐사가 발생한 것으로 사료된다.

• Corrosion Science and Technology
• /
• 제14권4호
• /
• pp.195-199
• /
• 2015

Materials of choice for offshore structures and the marine industry have been increasingly favoring materials that offer high strength-to-weight ratios. One of the most promising families of light-weight materials is titanium alloys, but these do have two potential Achilles' heels: (i) the passive film may not form or may be unstable in low oxygen environments, leading to rapid corrosion; and (ii) titanium is a strong hydride former, making it vulnerable to hydrogen embrittlement (cracking) at high temperatures in low oxygen environments. Unfortunately, such environments exist at deep sea well-heads; temperatures can exceed $120^{\circ}C$, and oxygen levels can drop below 1 ppm. The present study demonstrates the results of investigations into the corrosion behavior of a range of titanium alloys, including newly developed alloys containing rare earth additions for refined microstructure and added strength, in artificial seawater over the temperature range of $25^{\circ}C$ to $200^{\circ}C$. Tests include potentiodynamic polarization, crevice corrosion, and U-bend stress corrosion cracking.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2008년도 제38차 학술발표대회
• /
• pp.192-194
• /
• 2008

The study has focused on the dyeing properties of 4 kinds of high temperature type mono azo disperse dyes, widely used in the dyeing factory, under the ultra low liqour ratio (1:4) dyeing condition. Among those, C.I. Disperse Red 343 and C.I. Disperse Blue 79 showed un-levelled dyeing results from the ultra low liquor ratio dyeing bath as well as poor dispersion stability under the high temperature. We recommended some leveling agents to improve the leveling behavior of these dyes mentioned above. The milling technology should be further developed to achieve the dispersion stability.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2002년도 학술대회 논문집
• /
• pp.312-314
• /
• 2002

Magnetic circuit design of HTS (High Temperature Superconducting) motor is important to achieve the power at a given load condition, and it is essential to the thermal design for HTS motor rotors. To determine the result of thermal design, the magnetic field distribution has to be known exactly. On the basis of the 2 dimensional magnetic field analysis, the magnetic field distributions due to several cases are calculated by using Biot-Savart equation and magnetic image method. And the I$_{c}$ of HTS field coil was calculated by using I$_{c}$-B(equation omitted) curve and 3D FEA(Finite Element Analysis).is).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.199-201
• /
• 2008

In this paper, We studied optimum service model of passenger car monitoring system at limited wireless bandwidth subway and railway. High bandwidth is better if we need more services. But, high bandwidth requires more cost at tunnel of subway. More bandwidth make receive sensitivity to bad. We deduced best bandwidth of subway wireless transmission system reflecting the cost of installation and efficiency of system. Consequently, we decide efficient service model of passenger car monitoring system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.595-598
• /
• 1988

In this paper, a new folding algorithm for design of high density PLA's is proposed. This algorithm generates transform matrix so that programmed region of each row becomes narrow. Based on transform matrix, folding pair is selected. In the process of generating transform matrix, interval degree and dense degree are used to improve folding ratio. This paper also proposes an efficient folding pair graph which has short time of selection folding pair. This proposed algorithm is named PLAFOLII and implemented in C language on VAX-11/750 (UNIX) computer. Through various example, efficiency of this algorithm is verified.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.306-309
• /
• 2004

Recently, the environmental problem has received considerable attention. so, many lamps have been developing for environmental requirement and energy efficiency. also, at glow discharge lamp researchers try to reduce energy spending that is power saving lamp. this kind requirement agree with strong points of electrodeless fluorescent lamp has received to now lighting sauce. At low pressure as mTorr I.C.P make high density plasma easily, is good to maintain discharge, has high ionization and does not have failing lighting and losing ability of electron radiation by oxidation and volatilization of electrodes, because this tape does not have electrodes. This point of I.C.P can use at electrodeless fluorescent lamp in this study ICP display elements and Ar, Ne, Kr are researched for optical characteristic. each gas is looked into optical characteristic, also mixed gases is experiment for optical characteristic.