• Journal of the Korean Ceramic Society
• /
• v.13 no.1
• /
• pp.20-24
• /
• 1976

These are many kinds of self-hardening methods for sand mold using sodium silicate. When sodium silicate solution is mixed with calcium-orthosilicate powder hardening reaction occurs, which is based for self-hardening method at high temperature. The high temperature strength and resicual strength of mold are related to the mole ratio of sodium silicate and the contents of calcium-orthosilicate powder. The results obtained in this study were as follows: 1) The high temperature strength of mold was maximum at about $600^{\circ}C$, and at higher temperature showed lower value on the contrary. 2) The high temperature strength of mold was increased by increasing the amount of sodium silicate having lower mole ratio and high concentration. 3) The residual strength of mold was reduced by increasing the mole ratio of sodium silicate and increasing the concentration of calcium-orthosilicate.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.6
• /
• pp.789-793
• /
• 2003

An investigation was conducted on 729 Hariana cows maintained at Government Livestock Farm, Hisar, from 1973 to 1999, with an objective to compare the efficiency of various selection indices for attaining desired genetic gains in the index traits. The various traits included were age at first calving (AFC), service period (SP), calving interval (CI), days to first service (DFS), number of services per conception (NSPC), lactation milk yield (LY), peak yield (PY), dry period (DP). Except for LY, PY and AFC the heritabilities of all other traits were low. Desirable associations among reproductive traits are supportive of the fact that any one of these traits incorporated in simultaneous selection is expected to cause correlated response in other traits. Production traits (LY and PY) were positively correlated, while DP had low negative genetic correlation with LY, and high genetic correlation with PY. Thus, DP can be taken as additional criteria in selection index for better over all improvement. Almost all production traits except DP had low negative correlation with AFC, SP, DFS and CI meaning that reduction in reproduction traits up to certain level may increase production performance. While, the correlation of NSPC with LY and PY was moderate positive. Among four trait indices I23: incorporating PY, AFC, SP and NSPC and among three trait indices I1: incorporating LY, AFC and SP were the best as these required least number of generations (4.87 and 1.35, respectively) to attain desired goals. Next in order of preference were PY or LY along with DP and SP as the best indices (I20 and I16) of which, index with PY may be preferred instead of LY as it produced considerably high correlated response in LY and reduction in NSPC as well.

• The Plant Pathology Journal
• /
• v.36 no.3
• /
• pp.218-230
• /
• 2020

Net blotch of barley caused by Pyrenophora teres (Died.) Drechsler, is one of the most destructive diseases on barley in Algeria. It occurs in two forms: P. teres f. teres and P. teres f. maculata. A total of 212 isolates, obtained from 58 fields sampled in several barley growing areas, were assessed for fungicide sensitivity by target gene analysis. F129L and G137R mitochondrial cytochrome b substitution associated with quinone outside inhibitors (QoIs) resistance, and succinate dehydrogenase inhibitors (SDHIs) related mutations (B-H277, C-N75S, C-G79R, C-H134R, and C-S135R), were analyzed by pyrosequencing. In vitro sensitivity of 45 isolates, towards six fungicides belonging to three chemical groups (QoI, demethylase inhibitor, and SDHI) was tested by microtiter technique. Additionally, sensitivity towards three fungicides (azoxystrobin, fluxapyroxad, and epoxiconazole) was assessed in planta under glasshouse conditions. All tested isolates were QoI-sensitive and SDHI-sensitive, no mutation that confers resistance was identified. EC₅₀ values showed that pyraclostrobin and azoxystrobin are the most efficient fungicides in vitro, whereas fluxapyroxad displayed the best disease inhibition in planta (81% inhibition at 1/9 of the full dose). The EC₅₀ values recorded for each form of net blotch showed no significant difference in efficiency of QoI treatments and propiconazole on each form. However, in the case of fluxapyroxad, epoxiconazole and tebuconazole treatments, analysis showed significant differences in their efficiency. To our knowledge, this study is the first investigation related to mutations associated to QoI and SDHI fungicide resistance in Algerian P. teres population, as well as it is the first evaluation of the sensitivity of P. teres population towards these six fungicides.

• Journal of Marine Life Science
• /
• v.3 no.2
• /
• pp.45-50
• /
• 2018

Rock bream iridovirus (RBIV) is a megalocytivirus widely infected in various fish species in Korea, causing symptoms of acute inflammation and enlargement of spleen. In our previous study, RBIV induced the initial upregulation but later down-regulation of proinflammatory cytokines and IFN1 gene expression. Signal transducers and activators of transcriptions (STAT) are transcription factors involved in the regulation of immune genes including IFNs. This study was conducted to analyse the expression of STAT2. The expressional study of STAT2 gene was performed in head kidney and spleen upon RBIV infection and immune stimulants like LPS or poly I:C in vitro. Consequently, STAT2 gene expression pattern was different in head kidney and spleen as it was significantly up-regulated by LPS from 4 h to 8 h but down-regulated at 24 h while up-regulated by poly I:C at 8 h in head kidney while, in spleen, STAT2 gene expression was down regulated by LPS but significantly up-regulated by poly I:C. Upon RBIV stimulation, STAT2 gene expression was significantly down-regulated by high dose RBIV at 4 h but up-regulated at 8 h and 24 h in head kidney. In spleen cells, it was up-regulated by medium dose RBIV at 4 h and by high dose RBIV at 4 h and 8 h but down regulated later then. In vivo, STAT2 gene expression was not significantly affected by RBIV infection while significant up-regulated by vaccination at day 7 post-vaccination, indicating STAT2 gene can be involved in adaptive immune response in rock bream.

• Applied Biological Chemistry
• /
• v.27 no.2
• /
• pp.135-137
• /
• 1984

Amylograms of 12 traditional (j) and 9 high-yielding $(j{\times}i)$ rice varieties revealed that the high-yielding rice varieties had higher values for peak (P), hot-paste (H) and cold-paste (C) viscosities and showed the less variation among varieties. Peak viscosity had significant negative correlations with C/P and C/H, but no eorrelation with H/P.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.693-698
• /
• 2012

In this study aluminum isopropyl oxide ($Al(O-i-Pr)_3$) was supported on the amine-functionalized surface of silica to synthesize high molecular weight (MW) polylactide (PLA), and it was tested for PLA polymerization behaviors. A silica was funtionalized with silane compound having amine groups, then in-situ treated with $Al(O-i-Pr)_3$. $Al(O-i-Pr)_3$ attached to amine group on silica showed activity only in the presence of MAO (methyl aluminoxane). At the polymerization temperature of $115^{\circ}C$, the conversion and the MW of PLA were increased as the amount of silane was increased. At the polymerization temperature of $130^{\circ}C$, the conversion was decreased while the MW was increased drastically and reached to MW 44000 g/mol when the amine concentration was 3.0 mmol/g. A bimodal type GPC curve was shown at the polymerization temperature of $115^{\circ}C$. As the amount of amine group increased, the peaks of GPC curve were merged. At the polymerization of $130^{\circ}C$, a unimodal GPC curve was shown. $Al(O-i-Pr)_3$ supported on amine-functionalized silica was able to produce higher MW PLA with enhanced activity compared to homogeneous $Al(O-i-Pr)_3$.

• Membrane Journal
• /
• v.20 no.2
• /
• pp.159-168
• /
• 2010

In this study, high porous PVdF flat sheet membranes were prepared to obtain reinforced membrane support for polymer electrolyte membrane fuel cell. Nano-size laponite was randomly dispersed in the membranes to improve mechanical property which lowered by the high porosity. The morphology and porosity of prepared PVdF/Laponite composite membranes were examined using the SEM analysis and the weight method and all membranes showed over 60% porosity. The membrane thermal stability depending on the laponite contents in the composite membranes was evaluated by membrane heat shrinkage at $105^{\circ}C$ and $135^{\circ}C$. MD and TD heat shrinkage of the PVdF composite membrane containing 5 wt% laponite was 2~3% and 2~3.5% at $135^{\circ}C$, respectively. The mechanical strength was enhanced after incorporating laponite particles and 30% increase in the modulus compared to pure PVdF membrane was obtained.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.153-158
• /
• 1995

All of the nuclear power plants in Korea we operating with analog instrumentation and control (I&C) equipment which are increasingly faced with frequent troubles, obsolescence and high maintenance expenses. Electrical and computer technology has improved rapidly in recent years and has been applied to other industries. So it is strongly recommended we adopt modern digital and computer technology to improve plant safety and availability. The advanced I&C system, namely, Integrated Intelligent Instrumentation and Control System (I$^3$CS) will be developed for beyond the next generation nuclear power plant. I$^3$CS consists of three major parts, the advanced compact workstation, distributed digital control and protection system including Automatic Start-up/shutdown Intelligent Control System (ASICS) and the computer-based alarm processing and operator support system, namely, Diagnosis, Response, and operator Aid Management System (DREAMS).

• Proceedings of the KIEE Conference
• /
• 2001.11b
• /
• pp.387-390
• /
• 2001

The experiments were performed in model conductors under the application of ac and dc high-voltages. The results of an experimental investigation into the flashover characteristics of air dielectric strength in the presence of oil/gas flame are reported. It is demonstrated that flame can reduce by more than half, 80% in maximum the breakdown voltage of a model line. Taking a horizontal model line with a k=0.5, it can be seen from the results that the reduction of flashover levels, in comparison with the no-flame case, are 78.7[%] for h=0[cm], 59.6[%] for h=3[cm], 46.4[%] for h=6[cm], 40.4[%] for h=9[cm] and 23.2[%] for h=12[cm] when ac voltage is applied.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.04a
• /
• pp.150-150
• /
• 2003