• Journal of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.301-307
• /
• 1991

The solubilities of the n-propyl iodide in nitrobenzene and m-xylene have been measured at 8$^{\circ}$, 15$^{\circ}$ and 25$^{\circ}C$ in the presence and the absence of gallium iodide. When gallium iodide does not exist in the system, the solubility of n-propyl iodide in m-xylene is greater than in nitrobenzene, indicating a stronger interaction of n-propyl iodide with m-xylene than that with nitrobenzene. It could be thought that n-propyl iodide forms unstable complex with gallium iodide in the presence of gaillium iodide in the system. This complex has been assumed in various ways and evaluated, that instability constant (K value) is relatively certain under the assumption of 1:1 complex, n-C$_3H_7I{\cdot}GaI_3$. Therefore, the complex would form the following equilibrium in the solution: n-C$_3H_7{\cdot}GaI _3{\rightleftharpoons}n-C_3H_7I+1/2Ga_2I_6$ the instability of the complex of n-propyl iodide with gallium iodide is compared with similar complexes of gallium iodide with methyl iodide. The changes of enthalpy, free energy and entropy for the dissociation of the complex are also calculated.

• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.3
• /
• pp.43-48
• /
• 2002

In this study, high performance electrode catalyst was developed in fabrication of membrane electrode assembly for PEMFCs(Polymer Electrolyte Membrane Fuel Cells). The I-V characteristics were measured to evaluate the influence of Nafion solution and Pt loading amount in the catalyst composition. The electrode characteristics were also investigated with respect to temperature change. The electrode performance was optimized at Nafion 5 wt% and 0.5 mg Pt/$\textrm{cm}^2$ content. The increase in the concentration of Nafion solution resulted in the decrease in electrode performance. At $80^{\circ}C$ of unit cell, I-V characteristics excelled those obtained at lower temperature. There was no difference in performance at low current density, but the improvement of voltage value in higher temperature could be found at high current density.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.3
• /
• pp.319-328
• /
• 1997

To develop a beneficial microbial feed for the cultivation of rotifer, Brachionus plicatilis, an aerobic photosynthetic bacterium, Erythrobacter sp. $S\;\pi-I$ was isolated from marine structure at Haeundae beach in Pusan, Korea. Feeding effects of Erythrobacter sp. $S\;\pi-I$ on the growth of rotifer were analyzed comparing to other feeds such as PSB (purple nonsulfur bacteria), Chlorella sp. and baker's yeast. Erythrobacter sp. $S\;\pi-I$ contained more linoleic acid $(C_{18:3\omega3})$ and oleic acid $(C_{18:1\omega9})$ and amino acids than PSB (purple nonsulfur bacteria), Chlorella sp. and baker's yeast. The rotifer fed on Erythrobacter sp. $S\;\pi-I$ showed better effects than those fed on other feeds in the individual growth, size and weight. Also, the rotifer especially contained more eicosapentaenoic acid $(C_{20:5\omega3})$ and docosahexaenoic acid $(C_{22:6\omega3})$ in case of Erythrobacter sp. $S\;\pi-I$ feeding than the other feeds. In case of the feed of PSB and baker's yeast docosahexaenoic acid $(C_{22:6\omega3})$ did not show. In amino acid analysis, the rotifer fed on Erthrobacter sp, $S\;\pi-I$ showed more amino acid content comparing to those fed on other diets. Especially, arginine, isoleucine, histidine, lysine, methionine, phenylalanine, threonine, which are essential amino acid for fish growth, showed high contents. These results suggested that the aerobic photosynthetic bacterium, Erythrobacter sp. $S\;\pi-I$ would be a beneficial microbial teed for the cultivation of rotifer.

• Journal of Korean Biological Nursing Science
• /
• v.14 no.1
• /
• pp.49-56
• /
• 2012

Purpose: The purpose of this study was to compare the effects of anorexia induced by consecutive low-dose and high-dose of cisplatin (CDDP) on the hindlimb muscles of rats. Methods: Male Sprague-Dawley rats were assigned to three groups: Control group (C) received a saline (the same dose and duration as the low CDDP group), the high-dose cisplatin (High CDDP) group received a single 5 mg/kg dose of cisplatin, the consecutive low-dose cisplatin (Low CDDP) group had 1 mg/kg of cisplatin administered for five consecutive days. On the 8th day the soleus and gastrocnemius muscles were dissected. Body weight, food intake, activity, muscle weight, Type I, II fiber cross-sectional area (CSA) of the dissected muscles were measured. Results: Body weight, food intake, muscle weight and Type I, II fiber CSA of the High CDDP and Low CDDP groups were significantly less than the C group. The High CDDP group showed significant decreases, compared to the Low CDDP group, in body weight, food intake, activity score, muscle weight and Type I, II fiber CSA. Conclusion: Hindlimb muscle atrophy occurs due to anorexia induced by both consecutive low-dose and high-dose cisplatin. The muscle atrophy induced by consecutive low-dose cisplatin is less apparent than high-dose cisplatin.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1997.04a
• /
• pp.86-86
• /
• 1997

Human annexin I is a member of annexin family of calcium dependent phospholipid binding proteins, which have been implicated in various physiological roles including phospholipase A$_2$ (PLA$_2$) inhibition, membrane fusion and calcium channel activity. In this work, the structure of N-terminally truncated human annexin I (Δ-annexin I) and its interactions with Ca$\^$2+/, ATP and cAMP were studied at atomic level by using $^1$H, $\^$15/N, $\^$l3/C NMR (nuclear magnetic resonance) spectroscopy. The effect of Ca$\^$2+/ binding on the structure of Δ-annexin I was investigated, and compared with that of Mg$\^$2+/ binding. The addition of Ca$\^$2+/ to Δ-annexin I caused some changes in the high field and low field regions of $^1$H NMR spectra. Whereas, upon addition of Mg$\^$2+/ to Δ-annexin I, almost no change could be observed. Also we found that the binding ratio of ATP to Δ-annexin I is 1. Because Δ-annexin I is a large protein with 35 kDa molecular weight, site-specific (carbonyl-$\^$l3/C, amide-$\^$15/N) labeling technique was used to determine the interaction sites of Δ-annexin I with Ca$\^$2+/ and ATP. Assignments of all the histidinyl carbonyl carbon resonances have been completed by using Δ-annexin I along with its specific 1,2-subdomain. The carbonyl carbon resonances originating from His52 and His246 of Δ-annexin I were significantly affected by Ca$\^$2+/ binding, and some Tyr and Phe resonances were also affected. The carbonyl carbon resonances originating from His52 is significantly affected by ATP binding, therefore His52 seems to be involved in the ATP binding site of Δ-annexin I.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.99-105
• /
• 1995

This paper provides a highly efficient grinding for ferrous materials using ELID-grinding method. The grinding efficiency using ELID gring method with CIFB-cBN wheel and CB-cBN wheel is compared with general grinding method with V-cBN wheel. This paper measured grinding ratio for plunge grinding and grinding resistance for traverse grinding in order to investigate grinding ability. The results show that ELID grinding methods is useful for the high efficient grinding of ferrous materials.

• Fibers and Polymers
• /
• v.7 no.4
• /
• pp.352-357
• /
• 2006

The cotton fabrics were pretreated by sodium 2-(2,3-dibromopropionylamino)-5-(4,6-dichloro-1,3,5-triazinylamino) benzenesulfonate (DBDCBS) at alkaline condition ofroom temperature and then dyed with four disperse dyes having amino groups (C.I. Disperse Yellow 9, C.I. Disperse Red 11, C.I. Disperse Blue 56 and C.I. Disperse Violet 1) at acidic condition of high temperature. A novel hetero-bifunctional bridge compound, DBDCBS, has two reactive groups such as dichloro-striazinyl group and ${\alpha},\;{\beta}$-dibromopropionylamido group. The first has reactivity towards hydroxy group of cellulosic fiber and the second shows reactivity towards amino groups of disperse dye containing amino groups. The results indicate that it is possible to dye polyester/cotton blend at one-bath dyeing using one kind of disperse dye containing amino groups. Therefore, two kinds of dyeing methods such as two-bath process one-bath dyeing and one-bath process one-bath dyeing were investigated and their dyeabilities were compared. The differences between these two methods were negligibly small so that perfect one-bath one-step dyeing of polyester/cotton blend by one kind of disperse dye was achieved.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.7
• /
• pp.1990-1994
• /
• 2013

A novel multi-cationic borane, tri-N-methylpyridinium substituted triarylborane, $[BAr^N_3]I_3$ ($[2]I_3$) ($Ar^N=4-(4-C_5H_4N-Me)-2,6-Me_2-C_6H_2$) was prepared from the corresponding neutral tris-pyridyl borane, $BAr_3$ (2a) ($Ar=4-(4-C_5H_4N)-2,6-Me_2-C_6H_2$). The crystal structure of 2a determined by X-ray diffraction study reveals the presence of tri-coordinate boron center with peripheral pyridyl moieties. The fluoride ion affinity of the cationic borane, $[2]I_3$ was investigated by UV-vis absorption titrations and was compared with that of neutral 2a. While 2a binds fluoride with the binding constant of $1.9{\times}10^2\;M^{-1}$ in $THF/H_2O$ (9:1 v/v) mixture, $[2]I_3$ shows a very high binding constant ($K=1.0{\times}10^8\;M^{-1}$) that is greater by six orders of magnitude than that of 2a in the same medium. This result indicates that the fluorophilicity of triarylborane can be drastically enhanced by multiple pyridinium substitutions.

• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.139-141
• /
• 2000

High voltage direct current(HVDC) transmission system uses the phase controlled rectifier triggered by means of IPC(individual phase control) or EPC(equidistant pulse control). Most HVDC system has adopted EPC method that can solve the harmonic instability problem of IPC method in weak power system. But EPC has inherent indirect synchronizing problem requiring the closed loop control. This paper presents the new gate pulse generating method for 12-pulse HVDC converter, which combines IPC with EPC. Simulation and test results are presented. The basic concept is that it generates the gating pulse for 12-pulse converter by synthesizing the internal phase reference using the frequency and phase information of a sin91e phase voltage. To ensure the reliability of the external phase input, Potential transformer that detects the phase voltage has redundancy. Using fault detecting algorithm the healthy input is always guaranteed. And the frequency compensation function was reinforced.

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.49-52
• /
• 2014

REBCO coated conductor (CC) tapes with superior mechanical and electromechanical properties are preferable in applications such as superconducting coils and magnets. The CC tapes should withstand factors that can affect their performance during fabrication and operation of its applications. In coil applications, CC tapes experience different mechanical constraints such as tensile or compressive stresses. Recently, the critical current ($I_c$) degradation of CC tapes used in coil applications due to delamination were already reported. Thermal cycling, coefficient of thermal expansion mismatch among constituent layers, screening current, etc. can induce excessive transverse tensile stresses that might lead to the degradation of $I_c$ in the CC tapes. Also, CC tapes might be subjected to very high magnetic fields that induce strong Lorentz force which possibly affects its performance in coil applications. Hence, investigation on the delamination mechanism of the CC tapes is very important in coiling, cooling, operation and design of prospect applications. In this study, the electromechanical properties of REBCO CC tapes fabricated by reactive co-evaporation by deposition and reaction (RCE-DR) under transversely applied loading were investigated. Delamination strength of the CC tape was determined using the anvil test. The $I_c$ degraded earlier under transverse tensile stress as compared to that under compressive one.