DOI QR코드

DOI QR Code

Investigation on the electromechanical properties of RCE-DR GdBCO CC tapes under transversely applied load

  • Gorospe, Alking B. (Department of Mechanical Design Engieering, Andong National University) ;
  • Shin, Hyung-Seop (Department of Mechanical Design Engieering, Andong National University)
  • Received : 2014.12.10
  • Accepted : 2014.12.23
  • Published : 2014.12.31

Abstract

REBCO coated conductor (CC) tapes with superior mechanical and electromechanical properties are preferable in applications such as superconducting coils and magnets. The CC tapes should withstand factors that can affect their performance during fabrication and operation of its applications. In coil applications, CC tapes experience different mechanical constraints such as tensile or compressive stresses. Recently, the critical current ($I_c$) degradation of CC tapes used in coil applications due to delamination were already reported. Thermal cycling, coefficient of thermal expansion mismatch among constituent layers, screening current, etc. can induce excessive transverse tensile stresses that might lead to the degradation of $I_c$ in the CC tapes. Also, CC tapes might be subjected to very high magnetic fields that induce strong Lorentz force which possibly affects its performance in coil applications. Hence, investigation on the delamination mechanism of the CC tapes is very important in coiling, cooling, operation and design of prospect applications. In this study, the electromechanical properties of REBCO CC tapes fabricated by reactive co-evaporation by deposition and reaction (RCE-DR) under transversely applied loading were investigated. Delamination strength of the CC tape was determined using the anvil test. The $I_c$ degraded earlier under transverse tensile stress as compared to that under compressive one.

Keywords

References

  1. T. Takematsu, et al., "Degradation of the performance of a YBCO‐coated conductor double pancake coil due to epoxy impregnation," Physica C, vol. 470, pp. 674-677, 2010. https://doi.org/10.1016/j.physc.2010.06.009
  2. G. Majkic, E. Galstyan, Y. Zhang, V. Selvamanickam, "Investigation of delamination mechanisms in IBAD-MOCVD REBCO coated conductors", IEEE Trans. Appl. Supercond., vol. 23, p. 6600205, 2013. https://doi.org/10.1109/TASC.2012.2237496
  3. H.-S. Shin and A. Gorospe, "Characterization of transverse tensile stress response of critical current and delamination behavior in GdBCO coated conductor tapes by anvil test," Supercond. Sci. Technol., vol. 27, p. 025001, 2014. https://doi.org/10.1088/0953-2048/27/2/025001
  4. A. Gorospe, A. Nisay, J. R. Dizon, and H. S. Shin, "Delamination behaviour of GdBCO coated conductor tapes under transverse tension," Phys. C, Supercond., vol. 494, pp. 163-167, 2013. https://doi.org/10.1016/j.physc.2013.04.062
  5. A. Gorospe, A. Nisay, and H. S. Shin, "Delamination behaviour in differently copper laminated REBCO coated conductor tapes under transverse loading," Phys. C, Supercond., vol. 504, pp. 49-52,. 2014.
  6. N. Cheggour, et al., "Transverse compressive stress, fatigue, and magnetic substrate effects on the critical current density of Y-Ba-Cu-O coated RABiTS tapes," Advances in Cryogenic Eng., vol. 48, pp. 461-468, 2002. .
  7. S. Otten and R. Lagraauw, "Critical current degradation under transverse compressive stress in YBCO-coated superconductive tapes," A Bachelor assignment report, University of Twente, The Netherlands, 2012.
  8. N. Cheggour, et al., "Transverse compressive stress effect in Y-Ba-Cu-O coating on biaxially textured Ni and Ni-W substrates", IEEE trans. Appl. Supercond., vol. 13, no. 2, pp. 3530-3533, 2003. https://doi.org/10.1109/TASC.2003.812390
  9. M. Sugano, et al., "The effect of the 2D strain state on the critical current in GdBCO coated conductors," Supercond. Sci. Tech., vol. 25, p. 054014, 2012. https://doi.org/10.1088/0953-2048/25/5/054014
  10. D.C van der Laan, et al., "Anisotropic in-plane reversible strain effect in $Y_{0.5}Gd_{0.5}Ba_2Cu_3O7-{\delta}$ coated conductors," Supercond. Sci. Technol., vol. 24, p. 115010, 2011. https://doi.org/10.1088/0953-2048/24/11/115010
  11. N. Cheggour, J. W. Ekin, L. H. Thieme, and Y-Y Xie, "Effect of fatigue under transverse compressive stress on the slitted YBCO coated conductors," Appl. Supercond. Conf., vol. 5, ME08, 2006.

Cited by

  1. Evaluation of the electromechanical properties in GdBCO coated conductor tapes under low cyclic loading and bending vol.29, pp.1, 2016, https://doi.org/10.1088/0953-2048/29/1/014001