• Bulletin of the Korean Chemical Society
• /
• 제33권4호
• /
• pp.1345-1348
• /
• 2012

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1301-1304
• /
• 2010

The Indium modified mesoporous zeolite AlMCM-41 were synthesized by hydrothermal method and characterized by powder X-ray diffraction (XRD), fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS) techniques. The Knoevenagel condensation of aldehyde with malononitrile or ethyl cyanoacetate was carried out at reflux condition in ethanol by using heterogeneous In/AlMCM-41 catalyst. This method is fast, efficient, easy work-up and eco-friendly to afford the corresponding Knoevenagel adducts. The catalyst was recovered and reused for several cycles with consistent activity.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1508-1512
• /
• 2013

A simple and efficient synthesis of 2,4,5-trisubstituted imidazoles was achieved via a one-pot three-component cyclocondensation of benzil, aromatic aldehydes, and ammonium acetate in the presence of a catalytic amount of tetrabutylammonium hexatungstate $[TBA]_2[W_6O_{19}]$ as a heterogeneous catalyst under thermal solvent-free conditions. The key features of this methodology are operational simplicity, high yields, short reaction times, and a recyclable catalyst with a very easy work up.

• 한국세라믹학회지
• /
• 제26권2호
• /
• pp.235-241
• /
• 1989

A study on the APCVD(atmospheric pressure chemical vapor deposition) Al2O3 was done by using the aluminum-tri-isopropoxide/N2 reaction system at 40$0^{\circ}C$. When the flow rate of the carrier gas(N2) was over 2SLPM, heterogeneous reaction was observed. However, when the flow rate of the carrier gas was below 2SLPM, a porously deposited film or powder formation was observed. The film formed by a heterogeneous reaction was optically dense. The dense film is thought to be a kind of a hydrated alumina. After a thermal treatment of the film in the range of temperature from $600^{\circ}C$ to 1, 20$0^{\circ}C$, properties of the film seems to be changed due to dehydration and densification process. In the case of the powder on heat treatment(600~1, 20$0^{\circ}C$), both a phase transformation and the change of OH peak was observed.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1659-1664
• /
• 2014

A porous metal-organic framework (MOF), MIL-101, was synthesized in the presence of sulfated zirconia (SZ) to produce acidic SZ/MIL-101 composites for the first time. The composites were characterized with XRD, nitrogen adsorption, FT-IR, scanning electron microscope, chemical analysis and so on. The composites (SZ/MIL-101s) were successfully applied in a liquid-phase esterification for a high yield of ester. This catalytic result of SZ/MIL-101, compared with that of pure SZ or MIL-101 (showing a negligible yield of ester), suggests that the SZ in the composite is highly active in the acid catalysis probably because of the well-dispersed active species of SZ. Moreover, the esterification is catalyzed in heterogeneous mode as confirmed by negligible esterification after filtration of the catalyst. Finally, microwaves can be efficiently applied both in the synthesis of the composites and the esterification reaction to accelerate the two processes of synthesis and esterification by about 5 times.

• Bulletin of the Korean Chemical Society
• /
• 제30권11호
• /
• pp.2532-2534
• /
• 2009

A facile and efficient synthetic route has been developed for the polyhydroquinoline via four component reactions of aldehydes, dimedone, ethyl acetoacetate and ammonium acetate in the presence of catalytic amount of scolecite in ethanol at 70 ${^{\circ}C}$ through Hantzsch reaction. This method gives remarkable advantages such as simple work-up procedure, environmentally friendly, inexpensive, non-toxic and recyclable catalyst, shorter reaction time along with excellent yields.

• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.119-124
• /
• 2018

아닐린과메탄올의산화 카르보닐화방법에의한 Methyl N-phenyl carbamate 제조는 기존의포스겐을사용하는폴리머의 단량체 생산공정을 대체할 수 있는 환경 친화적인 공정으로 많은 관심을 가지고 있다. 본 연구에서는 담지체로 Y-zeolite, $SiO_2$, $Al_2O_3$를 사용하여 불균일화 촉매를 제조하였고, 제조 된 불균일화 촉매를 이용하여 아닐린과 메탄올로부터 산화카르보닐화 연속운전을 시도하였다. 회분식반응기를 이용하여 담지체를 결정하였으며, 담지된 palladium 촉매를 이용하여 조촉매의 영향과 반응온도, 반응압력 등 여러 반응최적조건을 확립하였다. 최적의 반응조건 MPC의 수율은 98.6% 였으며, 반응속도론적 연구를 수행하였다. 각 반응온도의 반응속도상수로부터 얻어진 활성화 에너지는 각각 E=82.38 kJ/mol, E=66.20 kJ/mol 이었다. 또한 확립된 반응조건에서 장시간 연속운전을 수행하여 카바메이트 공정 개발을 위한 기초자료를 구하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.152-152
• /
• 2013

Mechanism of energy conversion from chemical to electrical during exothermic catalytic reactions at the metal surfaces has been a fascinating and crucial subject in heterogeneous catalysis. A metal-semiconductor Schottky nanodiode is novel device for direct detection of chemically induced hot electrons which have sufficient energy to surmount the Schottky barrier. We measured a continuous chemicurrent during the hydrogen oxidation under of 760 Torr of O2 and 6 Torr of H2 by using Pt/Si and Pt/TiO2 nanodiodes at reaction temperatures and compared the chemicurrent with the reaction turnover rate. The thermoelectric current was measured by carrying out an experiment under O2 condition for elimination of the background current. Gas chromatograph and source meter were used for measurement of the chemical turnover rate and the chemicurrent, respectively. The correlation between the chemicurrent and the chemical turnover rate under hydrogen oxidation implies how hot electrons generated on the metal surface affect hydrogen oxidation.

• 대한화학회지
• /
• 제19권5호
• /
• pp.381-385
• /
• 1975

Alunite 鑛으로 부터 칼륨과 알루미늄 成分을 完全히 分離하여 내는 方法으로 pH8.0인 緩衝溶液과의 反應에서 反應速度와 反應機構를 究明했다.

• Bulletin of the Korean Chemical Society
• /
• 제35권12호
• /
• pp.3535-3541
• /
• 2014

Bisphenol A is considered as pollutant, because it is toxic and hazardous to living organisms even at very low concentrations. Biological oxidation used for removing this organic from waste water is not suitable and consequently application of catalytic wet oxidation has been considered as one of the best options for treating bisphenol A. We have developed Fe/SBA-15, Ni/SBA-15 and Fe-Ni/SBA-15 as heterogeneous catalysts using the advanced impregnation method for oxidation of bisphenol A in water. The catalysts were characterized with physico-chemical characterization methods such as, powder X-ray diffraction (PXRD), FT-IR measurements, N2 adsorption-desorption isotherm, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and inductively coupled plasma optical emission spectroscopy (ICP-OES) analysis. This work illustrates activity of the catalysts for heterogeneous catalytic degradation reaction revealed with excellent conversion and recyclability. The degradation products identified were not persistent pollutants. GC-MS analysis identified the products: 2,4-hexadienedioic acid, 2,4-pentadienic acid and isopropanol or acetic acid. The leachability study indicated that the catalysts release very little metals to water. Therefore, the possibility of water contamination through metal leaching was almost negligible.