• Advances in materials Research
• /
• v.4 no.4
• /
• pp.215-226
• /
• 2015

Experiment on roughness and micro pit defects of SUS 430 ferrite stainless steel was investigated in laboratory. The relation between roughness and glossiness with reduction in height, roll surface roughness, emulsion parameters was analyzed. The surface morphology of micro pit defects was observed by SEM, and the effects of micro pit defects on rolling reduction, roll surface roughness, emulsion parameters, lubrication oil in deformation zone and work roll diameter were discussed. With the increasing of reduction ratio strip surface roughness Ra(s), Rp(s) and Rv(s) were decreasing along rolling and width direction, the drop value in rolling direction was faster than that in width direction. The roughness and glossiness were obtained under emulsion concentration 3% and 6%, temperature $55^{\circ}C$ and $63^{\circ}C$, roll surface roughness $Ra(r)=0.5{\mu}m$, $Ra(r)=0.7{\mu}m$ and $Ra(r)=1.0{\mu}m$. The glossiness was declined rapidly when the micro defects ratio was above 23%. With the pass number increasing, the micro pit defects were reduced, uneven peak was decreased and gently along rolling direction. The micro pit defects were increased with the roll surface roughness increase. The defects ratio was declined with larger gradient at pass number 1 to 3, but gentle slope at pass number 4 to 5. When work roll diameter was small, bite angle was increasing, lubrication oil in micro pit of deformation zone was decreased, micro defects were decreased, and glossiness value on the surface of strip was increased.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.31-40
• /
• 2017

The present study used one of research techniques which is eye gaze tracking for neuromarketing. When pupil's size of men dilated over than three sigma (0.135%), the interest and eye movement in observation were measured. According to statistical analysis of previous studies, three sigma range is meaningful therefore sigma range was used as operational definition because 'pupil dilatation' is difficult to be define in eye gaze tracking data. Pictures of basketball games were selected as visual stimuli and 90% effective ratio of total 7,200 data were calculated. Thus, 29 of 34 participants were used for test. Pupil's size was calculated by applying pupil's width and height into a formular; [Pupil's size = Pupil width/2${\times}$Pupil height/$2{\times}{\pi}$]. In conclusion, billboard utilized for sports marketing had meaningless effects because gaze frequency to basketball player and surrounding environment was higher than that to billboard when participantsas game spectators diltaed their pupil's size over than three sigma. Thus, it was required using new marketing strategies like neuromarketing to increase utility through the present study.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.289-296
• /
• 2012

The purpose of this study was to identify the irrigation intervals and the amount of suitable growing substrate needed to achieve the desired shallow-extensive green roof system during a dry summer in Korea. In terms of treatment, three types (SL, $P_6P_2L_2$, $P_4P_4L_2$) with varying soil mixture ratios and two types (15 cm, 25 cm) with varying soil depths were created. The results have been analyzed after measuring growth and soil water contents. The difference of growth by treatment was significant in terms of green coverage, height, leaf width and photosynthesis. In measurement of chlorophyll content, no difference was detected when measured against soil depth. According to the growth measurement of Zoysia japonica with respect to differing soil mixture ratios in the 15 cm-deep treatment, a statistical difference was detected at the 0.05 significance level in photosynthesis. In case of green coverage, height, chlorophyll content and leaf width, no statistical significance was observed. In case of the 25 cm-deep treatment, a statistical significance was observed in height and photosynthesis. In terms of green coverage, chlorophyll content and leaf width, no statistical significance was detected. In comparisons of soil moisture tension and soil water contents, the irrigation interval and amount were 8 days and 14.9 L in the SL (15 cm) treatment, respectively. The irrigation interval showed for 10 days a 1.3-fold increase, and the irrigation amount was 27.4 L 1.8-fold more than SL (25 cm), respectively. For $P_6P_2L_2$ (15 cm) treatment, the irrigation interval and amount were 12 days and 20.7 L, respectively. However, an irrigation interval under $P_6P_2L_2$ (25 cm) was for 15 days 1.3 times longer than $P_6P_2L_2$ (15 cm), and an irrigation amount of 40 L was 1.9 times more than that under $P_6P_2L_2$ (15 cm). In $P_4P_4L_2$ (15 cm) treatment, it was indicated that the irrigation interval was 15 days, and the irrigation amount was 19.2 L. It was not needed to irrigate for 16 days under $P_4P_4L_2$ (25 cm) treatment during the dry summer and the longest no-rain periods. The irrigation interval and amount under $P_4P_4L_2$ were 1.8-fold and 1.3-fold, respectively, more than SL treatment as affected by soil mixture ratio. Comparatively $P_4P_4L_2$ had more 1.3-fold and 0.9-fold in irrigation interval and amount more than $P_6P_2L_2$. Therefore, it can be noted that different soil depth and soil mixture ratios had a significant effect on the irrigation interval and amount.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.305-320
• /
• 2014

This study identifies the foot shapes of elderly women by classifying foot type according to the 3D shape of the foot and 2D sole type analyzing individual characteristics. The subjects were 295 elderly women over 60 years of age who live in Gwangju. A foot scanner (K&I Technology $Nexcan^{(R)}$) was used to obtain three-dimensional shapes of feet and a flat bad scanner (HP Scanjet G2410) was used to obtain the two-dimensional shapes of soles. The anthropometric measuring items consisted of 59 items estimated on the right foot of each subject. Data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the SPSS 19.0 statistical program. To classify the side type of elderly women's feet, three-dimensional measurement data were analyzed for the 27 measurement items using factor analysis and 6 factors were extracted (inside height and side gradient, ankle thickness, toe height and midfoot size, lateral malleolus height, instep, and heel height and gradient). A cluster analysis resulted in three types: 36.5% belonged to Type 1 (high forefoot and high midfoot), 31.1% belonged to Type 2 (high forefoot and low midfoot), and 32.4% belonged to Type 3 (low forefoot and high midfoot). The distribution was relatively even. For the sole, 8 factors were extracted (ball width and medial foot protrusion, lateral foot protrusion, forefoot and hindfoot length ratio, ball gradient, heel size, toe breadth, lateral ball length, and foot length) and a cluster analysis resulted in three Types (Type H, Type D, and Type A). The largest proportion (42.7%) belonged to Type H, which is the same as the elderly men's case.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.3
• /
• pp.3-19
• /
• 1987

The purpose of this study was to investigate desirable width / height ratio of enclosed space and to offer basic information for the design of enclosed spaces. The data of this study were gathered from the experiment through simulation. Photographic sampling of 7 campus sites located in Kwanak campus of Seoul National University and slides of perspective drawings of enclosed spaces with various D/H ratio (12, 1, 2, 4, 6, 9, 12)were used for simulation. A response format was made using the method of paired comparison and students from various departments were randomly selected for evaluation. In the method of analysis of data Thurstone's equation of Comparative Judgement was used for calculating preference score. A1so non-linear regression analysis was used for finding out relations between preference and D/H ratio. The other method of data analysis were correlation, Chi - test. And the results were summarized as follows. 1. In sketch simulation the ratio of D/H 4 got the highest preference store. This result suggests that desirable D/H ratio of enclosed space is D/H 4. And at the lower range of D/H ratio, as ratio increases, the preference score increases. At the higher range of D/H ratio, however, as ratio increases, the preference score starts to decrease from the cardinal point of D/H 4. 2. In campus photograph simulation preference is influenced by slope, elevation change of floor, trees, lawn area, familiarity, space arrangement, and exterior shape of building besides D/H ratio. 3. The preference virtue was not significantly affected by order effect. This result suggests that order effect can be ignored in the study of visual preference. 4. There are so many factors related to preference that it is difficult to explore those factors without scientific information based on scientific method. We must carry out study for scientific approach of planning and design based on precise, complete simulation technique.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.3
• /
• pp.35-41
• /
• 2011

A model test is carried out to investigate the vibration of truss type lift gate in the four major rivers project. The gate model scaled with the ratio of 1 : 25 is made of acryl panel dimensioned 1.6 m in width, 0.28 m in height in the concrete test flume. Firstly natural frequencies of the model gate are measured and the results are compared with the numerical results in order to verify the model. The amplitudes of the vibration are measured under the different gate opening and water level conditions. The results are analyzed to study the characteristics of the gate vibration according to the small gate opening, the large gate opening and the overflow conditions. These test results presents a basic data for the guide manuals of gate management and a design method to reduce the gate vibration of truss type lift gate. Finally, the vibration of truss type lift gate are assessed in comparison with those of formerly tainter gate.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.4
• /
• pp.241-244
• /
• 1999

The effect of Milliwrap and Uniwrap attached to the lid on the growth and acclimation of lily growing in vitro was investigated. Milliwrap treatment increased the plant height 1.6 and 1.2 times higher than control in 'Dame Blanche' and '94-36', respectively, plant height of 'Dame Blanche' was 6.1㎝ and '94-36' line was 13.4 ㎝. Two treatments slightly inhibited the fresh weight in 'Dame Blanche', whereas Milliwrap and Uniwrap enhenced the fresh weight more than 30% in '94-36'. Leaf width (1.0 ㎝) of Milliwrap treatment was most wide, which was 2.5 times higher than that of control. In the fresh weight of bulblets, the fresh weight per bulblet of treatment was higher than control in '94-36', but the number of bulblets per scale were few in the treatment to control. In the air composition of culture vessel, ethylene content (0.03 ppm) was low in the Milliwrap treatment compared with the control. CO₂ content of control was higher than treatments as 0.11% and it was about 3 times to air condition of out side. The acclimation ratio of Milliwrap treatment was higher as 85.1% and control was similar with Uniwrap treatment.

• Journal of Energy Engineering
• /
• v.11 no.4
• /
• pp.350-358
• /
• 2002

The present work determined the flame structure characteristics of coal syngas combusted inside swirl burners with various nozzle types. Fuel nozzle types are largely classified into two groups of axial and tangential. Experiments were carried out for investigating the effects of fuel nozzle geometry, fuel composition ratio, heating rate, excess air, and degree of swirl on the turbulent diffusion flame structure. To determine the characteristics of the flame structure, axial type fuel nozzle diameter of laboratory-scale combustor is varied to 1.23, 1.96, and 2.95 ㎜ and the direction of tangential type nozzles are varied to radial, clockwise, and counter-clockwise. The comparison of the experimental results was performed to understand functional parameters relating the flame structure. Data analysis showed that the vertical straight flame height generally decreased with increasing swirl number and decreasing axial type nozzle diameter. Flame height established with tangential type nozzle is 3 times shorter than that with vertical type. The flame structures among the 3 different tangential fuel nozzles relatively showed no particular difference. By increasing the heating rate, the width of flame increased generally in both vertical and tangential flame. Within the present experimental parameters of the investigation, flame structure is mainly depends on the nozzle type of the combustor. The visually investigated flame lengths are confirmed through the analysis of temperature profile of each flame.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.1
• /
• pp.141-151
• /
• 2008

Objectives : The purpose of this study was to investigate effects of long-term taxi driving posture on the balance of musculoskelectal system. Methods : The author practiced Moire topography by using IBS-2000 for 30 male taxi drivers and general people. Then we measured difference of contour lines, difference of shoulder joint height, interval between vertical baseline of pelvis and vertical baseline of neck, ratio of thoracic curve and lumbar curve, difference of width between right and left through Moire topography. After we statistically analyzed difference of Moire topography's data between long-term employed male taxi drivers and general people. Results : 1. Taxi drivers, difference of contour lines in scapular, lumbar, gluteal region was bigger than general people and significant difference(p<0.05) was observed between subject group. 2. Taxi drivers, diference of shoulder joint height was more large than general people and significant difference(p<0.01) was observed between subject group. 3. Taxi drivers, diference of interval between vertical baseline of pelvis and vertical baseline of neck was more large than general people and significant difference((p<0.05) was observed between subject group. 4. Taxi drivers, ratio of thoracic curve was more large than general people and ratio of lumbar curve was more less than general people and significant difference(p<0.05) was observed between subject group. Conclusions : According to above results long-term taxi driving posture might cause musculoskelectal system unbalance.