• Applied Biological Chemistry
• /
• v.44 no.3
• /
• pp.185-190
• /
• 2001

Alginate, a well-known biopolymer, is universally applied for immobilization of microbial cells. Biosorption characteristics of lead by waste biomass of immobilized A. niger beads, used in fermentation industries to produce citric acid, were studied. The immobilized A. niger beads, prepared via capillary extrusion method using calcium chloride, were applied in the removal of lead. Pb uptake was the highest in A. niger beads cells grown for 3 days with medium producing citric acid (12% sucrose, 0.5% $NH_4NO_3$, 0.1% $KH_2PO_4$, and 0.025% $MgSO_4$). Lead uptake by the immobilized A. niger beads and free A. niger mycellia beads increased sharply with time. However, while uptake by the immobilized A. niger beads continued to increase slowly, that by free A. niger mycellia beads stopped after 30 min. The optimum pH and temperature of lead uptake were found to be 6 and $35^{\circ}C$, respectively. The maximum uptake of lead was achieved with $50{\sim}100$ beads and 50 ml lead solution in a 250-ml Erlenmeyer flask, while, at over 100 beads, uptake of the lead decreased. The order of biosorption capacity for heavy metals was Pb>Cu>Cd. Pb uptake capacity of the immobilized A. niger beads treated with 0.1 M $CaCI_2$, 0.1 M NaOH, and 0.1 M KOH decreased compared to the untreated beads. On testing the desorption of Pb from the immobilized A. niger beads, re-uptake of Pb was found possible after desorption of the binding metal with 0.1 M HCI.

• Ocean and Polar Research
• /
• v.33 no.3
• /
• pp.265-280
• /
• 2011

The temporal dynamics of the meiofauna community in Marian Cove, King George Island, Antarctica were observed from March 7 to December 21 2007. Nine meiofauna taxa were found, with nematodes the most dominant group, making up 92.97% of the total meiofauna density, followed by harpacticoid copepods (3.18%). Meiofauna abundance ranged from 123 to 874 individuals per 10 $cm^2$ (mean 464 inds.10 $cm^{-2}$), which is lower than that found in some polar and temperate regions. The lowest meiofauna abundance was found in the 26th April sample (III) and the highest meiofauna abundance was found in the March 23rd sample (II). There was no correlation between meiofauna abundance and season. The seasonal changes were likely caused by meltwater runoff, and there were the physical disturbances on the bottom sediment by huge iceberg. Biomass of meiofauna varied between 20.36 and 101.02 ${\mu}gC{\cdot}10\;cm^{-2}$, and overall mean biomass was 54.17 ${\mu}gC{\cdot}10\;cm^{-2}$ during the study periods. More than 80% of meiofauna was concentrated in the upper 2 cm of the sediment, and density decreased with depth. The mean diversity index was 0.37, and the ratio between the abundance of nematodes: and harpacticoids (N/C) ratio ranged from 7.31 to 95.04 (mean 26.39). NMDS analysis divided the community into three groups: A (III, IV, V, VII, VIII), B (II, IX, XI, XII) and C (I, V, X). The results of ANOSIM and SIMPER analysis revealed significant differences in community structure among three groups and major contributed meiofauna taxon in grouping were nematodes and copepods. No significant correlations were observed between major meiofauna taxon and environmental factors. Thirteen species in 12 genera representing nine families of harpacicoids were recorded. Ancorabolidae was the most diverse family, and Heteropsyllidae was the most abundant. The correlation analysis between benthic harpacticoid copepods and environmental factors showed that some species were affected by water temperature, sediment temperature, salinity, chlorophyll a concentration, grain size of the sediments and heavy metal contents of the sediments. These data describe the usefulness of benthic harpacticoid copepods as biological indicator species in Antarctic regions.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.4
• /
• pp.117-124
• /
• 2001

This study was executed for utilizing it as basic data in appropriate recycling way and design by examining and analyzing various characteristics of food waste which is being discharged from various restaurant and apartment house. In general, there were differences in restaurants classification and Japanese restaurant showed big differences as compared to other restaurants. Vegetable had the highest composition and its contents had big difference according to seasons. In alien substances, oyster shells were the highest and restaurants showed high rate of alien substances than apartments, therefore it was required to divide them in advance. Salinity was the highest in Japanese restaurants and most restaurants had rate of up to 1%, so it was not appropriate for recycling. However, it was considered that if there is cleaning operation in the whole process, there might not be a problem. Feed Ingredient had 28% of fiber, 25% of protein, and 11% of fats. We analyzed noxious germs and heavy metal too. However microorganisms of etiological cause were not detected and each harmful material showed less values of control concentration. In the result of analysis of each characteristic, it is required to consider collection rate from restaurants and apartments and seasonal cause into design regarding recycling. And apartments are compatible to compost than feed and food waste from Chinese, flour restaurant and collective feeding facilities are compatible for feed, as it is evaluated.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.6
• /
• pp.640-647
• /
• 2006

It is difficult to treat wastewater involved in heavy metal in electroplating industry. Recently, many industries adopt the clean technology to prevent production of pollutant in the process or reuse after the appropriate pollutant treatment. In this study, we estimate the ability of recovery of nickel and the efficiency using lab-scale ion exchange and electrodialysis process with electroplating industry wastewater. In the ion exchange experiments with 5 types of resin, the result showed that S 1467(gel-type strong acidic cation exchange resin) has the highest exchange capacity. And it showed that the 4 N HCl has the highest in regeneration efficiency and maximum concentration in the regeneration experiments with various kinds md concentration of the regenerant. During the electrodialysis experiments, we varied the current density, the concentration of electrode rinse solution, the flow rate of concentrate and electrode rinse solution in order to find the optimum operating condition. As a result, we obtained $250A/m^2$ of current density, 2 N $H_2SO_4$ of concentration of electrode rinse solution, 30 mL/min of flow rate of concentrate and electrode rinse solution as the best operating conditions. We performed the scale-up experiments on the basis of ion exchange and electrodialysis experiments. And we obtained the experimental result that exchange capacity of S 1467 was 1.88 eq/L resin, and regeneration efficiency was 93.7% in the ion exchange scale-up experiment, we also got the result that concentration and dilution efficiency increased, and current efficiency kept constant in the scale-up experiments.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.1
• /
• pp.1-10
• /
• 2012

The objective of this study was to investigate the sanitary and nutritional requirements for the industrialization of commercial kwamegi from Pacific herring Clupea pallasii (CK-PH). The proximate composition of CK-PH was 46.4-47.2% moisture, 24.7-25.6% crude protein, 23.6-25.2% crude lipid, and 2.5-2.9% ash, which differed significantly from that of commercial kwamegi from the Pacific saury Cololabis saira. According to the volatile basic nitrogen content, heavy metal content, and viable cell and coliform group counts, products K and F (prepared by a general process) maintained their freshness, whereas product T (treated with green tea extract) did not. Products K and F contained five types of biogenic amine: agmatine sulfate (2,596 and 2,067 mg/kg, respectively), putrescine dihydrochloride (8.5 and 8.0 mg/kg, respectively), cadaverine (3.7 and 3.9 mg/kg, respectively), histamine (17.0 and 12.4 mg/kg, respectively), and spermidine (8.7 and 8.0 mg/kg, respectively). Product T contained six amine types: tyramine (12.5 mg/kg), agmatine sulfate (2,723 mg/kg), putrescine dihydrochloride (29.4 mg/kg), cadaverine (321.6 mg/kg), histamine (45.3 mg/kg), and spermidine (13.6 mg/kg). The total amino acid content of product K (22.16/100g) was 5.8% lower than that of product F. The major amino acids of products K and F were aspartic acid, glutamic acid, leucine, and lysine. No difference was found in the fatty acid composition of products K and F. The major fatty acids in products K and F were 18:1n-9, 20:5n-3, and 22:6n-3. Based on the recommended daily dietary allowances for Koreans, the significant minerals in products K and F were calcium, phosphorus, and magnesium.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.53-59
• /
• 2005

The effect of various stressors such as reductant ascorbic acid, signalling molecules (salicylic acid and methyl jasmonic acid), heavy metals $(NiCl_2,\;and\;MnSO_4)$ and NaCl on the glutathione peroxidase (GPX) activities and isoenzyme expression patterns were investigated in rice seedling roots. Total GPX activity increased according to the increase of ascorbic acid concentration. Prominent enhancement of GPX1 isozyme due to ascorbic acid contributed to the increase of total GPX activity. GPX showed different reactivity toward salicylic acid and methyl jasmonic acid. GPX activity increased at 0.1 mM salicylic acid, and then decreased thereafter. However, GPX increased gradually in a methyl jasmonic acid concentration-dependent manner, and 3 fold increase of GPX activity was found at 1 mM methyl jasmonic acid. Moreover, GPX1 isozyme increased according to the increase of salicylic acid, while GPX1 isozyme decreased according to the increase of methyl jasmonic acid. When metal ions were treated, GPX activity increased considerably according to the increase of $NiCl_2$ concentration, however, GPX activity increased about 2 fold at 0.5 mM $CuSO_4$ and then decreased. Enhancement of GPX1 isozyme contributed to the increase of total GPX activities in $NiCl_2-treated$ and $MnSO_4-treated$ rice seedlings. Total GPX activity increased 1.7 fold in response to 300 mM NaCl. Especially GPX2 isozyme showed gradual increase according to the increase of NaCl concentration.

• Microbiology and Biotechnology Letters
• /
• v.4 no.3
• /
• pp.91-97
• /
• 1976

During the course of studies on the production and utilization of thermostable ${\alpha}$-amylase from a thormophilic actinomycete species isolated from soil, partial characterization of the ${\alpha}$-amylase has been (arried out. The optimum pH for the dextrinogenic activity of the enzyme was found to be 6.5 and the maximum reaction rate was achieved at a temperature range of 55$^{\circ}$ to 65$^{\circ}C$. Calcium ion was recognized to have a slight effect in activating the enzyme, while heavy metal salts especially ferrous and cupric ions showed a remarkable inhibition effect. The enzyme was best protected iron thermal denaturation at pH 8.0 with tris-HCI buffer；inactivation was rapid at higher or lower pH values. Furthermore, its thermal stability was greatly increased by calcium ion, particulary at the final concentration of 1${\times}$10$\^$－2/ mole in the reaction mixture. The Km value for the ${\alpha}$-amylase was calculated to be 2.17${\times}$10$\^$－4/g per $m\ell$ and the energy of activation for the dextrinogenic reaction to be 12,000${\pm}$580 ㎈ per mole.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.589-593
• /
• 2005

A laboratory study on the adsorption of nitrate in polluted coastal water using various materials including several types of dredged sediments(ST) and yellow c1ays(YC), which are activated by heat(HT), bioleaching for heavy metal removal(BL) and neutralization(NR) was performed. The equilibrium time of the adsorption for the sediment bioleached and treated by heat(BL-HT-ST) was only 17min which was faster than the sediment bioleached, neutralized and treated by heat(BL-NR-HT-S) (25min) or the sediment treated by the bioleaching process(BL -ST)(27min), but longer equilibrium times for yellow c1ay(YC) or heat treated yellow day(HT- YC) were required. The adsorption processes of nitrate in sea water for tested material could be described by Freundlich isotherm, but were significantly affected by surface characteristics of the materials. The adsorption capacities for raw sediment and heat treated sediment were 2.12 and 2.19mg NO3-N/g, respectively, which were higher than others, indicating that the sediment activated by heat could be used as a material for the improvement of nearshore water quality.

• Korean Chemical Engineering Research
• /
• v.48 no.3
• /
• pp.327-331
• /
• 2010

Porcine placenta was treated with alkali, acid and enzyme treatment to obtain extracts. Heavy metal contents such as Pb, As, and Hg were low enough to satisfy cosmetic agent standard. As a result of safety test(MTT assay), porcine placenta extracts showed over 80% of cell viability at $50{\mu}g/ml$, and cell toxicity was relatively lower. From antioxidation test using DPPH free radical scavenging assay, antioxidation effect was highest as 63% at $50{\mu}g/ml$ when porcine placenta was treated with alkali in pH 9. From whitening effect test using tyrosinase inhibition assay, tyrosinase inhibition effect was 30% at $50{\mu}g/ml$ concentration in alkali treated procine placenta, however, the efficiency was lower compared with arbutin or vitamin C. In anti-wrinkle effect test from elastase inhibition assay, elastase inhibition effects were 20~30% at $50{\mu}g/ml$ for 5 kinds of porcine placenta treatments, which was superior to standard, and especially, protease treated extracts showed best results. Skin formulation including 1% porcine placenta was made and the formulation was very stable for temperature and storage period. From this research, porcine placenta extract showed high potential for anti-wrinkle functional cosmetic agent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.557-564
• /
• 2017

The purpose of the thermal imaging observation device mounted on the K's tank in the Republic of Korea military is to convert infrared rays into visual information to provide information about the environment under conditions of restricted visibility. Among the various performance indicators of thermal observation devices, such as the view, magnification, resolution, MTF, NETD, and Minimum Resolvable Temperature Difference (MRTD), the MRTD is the most important, because it can indicate both the spatial frequency and temperature resolvable. However, the standard method of measuring the MRTD in NATO contains many subjective factors. As the measurement result can vary depending on subjective factors such as the human eye, metal condition and measurement conditions, the MRTD obtained is not stable. In this study, these qualitative MRTD measurement systems are converted into quantitative indicators based on a gray scale using imaging processing. By converting the average of the gray scale differences of the black and white images into the MRTD, the mean values can be used to determine whether the performance requirements required by the defense specification are met. The (mean) value can also be used to discriminate between detection, recognition and identification and the detectable distance of the thermal equipment can be analyzed under various environmental conditions, such as altostratus, heavy rain and fog.