• Horticultural Science & Technology
• /
• v.29 no.5
• /
• pp.413-419
• /
• 2011

This study was conducted to find out the cadmium (Cd) accumulation and tolerance of Iris pseudacorus and Acorus calamus as aquatic plants native to Korea for Cd removal in water. In the range of Cd concentration from $10{\mu}M$ to $130{\mu}M$, the Cd lethal dose 50 ($LD_{50}$) was $78.5{\mu}M$ in I. pseudacorus and $47.6{\mu}M$ in A. calamus. In I. pseudacorus, superoxide dismutase and peroxidase as antioxidants were relatively effective against oxidative stress caused by Cd, while catalase, superoxide dismutase, and polyphenolics were effective in A. calamus. The polyphenolics known as typical antioxidants were not detected in I. pseudacorus. In both species, the Cd accumulation in plants increased with the higher Cd concentration and the longer processing period. Also, the absorbed Cd was accumulated mainly in the roots. The amount of Cd accumulated in the shoot part was maximally $548.1mg{\cdot}kg^{-1}$ (82.1% to Cd accumulated in the root part) in I. pseudacorus and $121.4mg{\cdot}kg^{-1}$ (13.7%) in A. calamus, which implied that both species all were enough evaluated as Cd hyper-accumulators based on 0.01% or more Cd accumulation in the shoot. Especially I. pseudacorus showed outstanding ability to move well Cd into the shoots from the roots and high tolerance to Cd stress.

• Journal of Life Science
• /
• v.26 no.11
• /
• pp.1308-1312
• /
• 2016

Heavy metals such as gallium (Ga) cause serious physiological damage to exposed organisms, mostly of aquatic species. Ga one of the inter-metallic, transition elements increasingly being used in making high-speed semiconductors, such as Ga arsenide. The purposes of this study were to investigate the effects of Ga on acute toxicity, serum biochemical changes, and erythrocyte morphological changes in the blood stream of goldfish (Carassius auratus). Median lethal concentrations were determined in acute tests. The 96 hr $LC_{50}$ value was 9.15 mg/ml. Goldfish were exposed to different Ga concentrations (2.0, 4.0, and 8.0 mg/ml) for 30 days to assess its toxic effects. The results indicate that the measured serum biochemistry parameters (including glucose, blood urea nitrogen, creatinine, cholesterol, and triglyceride) of the Ga-exposed fish groups differed significantly from the untreated fish group. In addition, a change in the erythrocytes' morphology at a high concentration (8.0 mg/ml) of Ga exposure shows respiratory problems. Our results suggest that 2.0 mg/ml is proposed as a biologically safe concentration that can be used for establishing tentative water quality criteria concerning the same-size goldfish.

• Korean Journal of Environmental Agriculture
• /
• v.4 no.1
• /
• pp.31-36
• /
• 1985

In order to choose a suitable soil extractant for the prediction model of heavy metal content in brown rice, four extractants-0.1 M HCl, 0.1 M $HNO_3$, 0.1 M $NH_4$-oxalate and 0.001 M 2Na-EDTA, were compared by analyzing 84 soil and 45 brown rice samples collected from paddy fields adj-acent to five old zinc-mining sites. Content of cadmium and zinc in brown rice had the highest correlation coefficient to 0.001 M 2Na-EDTA and 0.1 M HCl extractants, respectively. However, the lead content in brown rice was significantly correlated with only 0.1 M $NH_4$oxalate solution. For the simultaneous prediction of zinc, cadmium and lead in brown rice, 0.1 M $NH_4$-oxalate solution was the most effective. On the multiple analysis by using various chemical characteristics of soils, pH and calcium content of soils were effective variables for the estimation of cadmium content in brown rice, while CEC and magnesium content were more effective for the estimation of zinc content in brown rice. Furthermore, for the estimation of lead content in brown rice, factors such as pH, CEC, calcium, magnesium, potassium and organic matter content were important variables in the multiple regression equation.

• Korean Journal of Pharmacognosy
• /
• v.47 no.4
• /
• pp.374-380
• /
• 2016

The purpose of this study was to evaluate of quality variation of Sibujeondaebotang according to storage period and temperature (5 and $25^{\circ}C$) Identificaion test, pH, specific gravity, heavy metal, microbial limit test and glycyrrhizic acid, paeoniflorin content of Sibjeondaebotang were performed during 12 months. The significant change was not shown on identificaion test, specific gravity, microbial limit test under long term storage and the result suited a safe level standards of 'Korean National Standard of Traditional Medicinal (Herbal and Botanical) Materials - "Sibjeondaebotang"'. The test of pH showed meaningful changes between two storage temperature (5 and $25^{\circ}C$) according to increasing storage period. The contents of glycyrrhizic acid and paeoniflorin had no relation with storage temperature($5^{\circ}C$, $25^{\circ}C$) but it showed a tendency to decrease according to the length of storage period. We predicted shelf-life of glycyrrhizic acid and paeoniflorin at storgae temperature(5 and $25^{\circ}C$) as about 6 and 3 months, respecttively. Therefore considering glycyrrhizic acid and paeoniflorin, sibjeondaebotang is determined to be in good condition within 3 months, regardless of the room temperature and refrigerated temperature. We were expected to serve as a basis for the guideline of medication counseling sibjeondaebotang.

• Journal of Sericultural and Entomological Science
• /
• v.29 no.2
• /
• pp.73-81
• /
• 1987

This investigation was carried cut to obtain the reeling water conditions in Korea. The analyzed items of water were pH, colority, turbidity, acidity, alkalinity, solids electric conductibity hardness and heavy metal ions. About 40% of the reeling water were found to be agreeable, 30% were acceptable provided with some quality control and the others were out of acceptable range mainly based on the M-alkalinity, acidity, pH and total hardness. It was found that there was a following relationship between total hardness and electric conductibity with the relative correlation coefficient r=0.9145. y=15.967+0.22774x Where x, y are electric conductivity and total hardness respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.82-89
• /
• 2007

Glass-ceramics were fabricated by heat-treating a glass at $700^{\circ}C$/10hr which was obtained by melting a glass frit mixed with $40{\sim}80 wt%$ EAF dust at $1300^{\circ}C$/1hr. Dependence of crystal phase and bonding state change upon a compositional change and heat treatment condition were studied and the results was connected to the toxic characterization leaching procedure (TCLP) test data to investigate a chemical durability of the specimens. Increasing dust in a glass shifted the peak around $1000cm^{-1}$ to the lower frequency which was composed of two vibration peaks for the nonbridging oxygen at $960cm^{-1}$ and the bridging oxygen at $1050{\sim}1060cm^{-1}$. Also, the $B_2O_3$ structure of boroxol ring changed to a tetrhedral-, trigonal- and di-borate with dust addition. The Fe-O peaks in the glass-ceramics were observed which is consitent with XRD results of spinel formation. The surface of glass after TCLP test was severely cracked while there was no cracks on a glass-ceramics after TCLP test so the chemical durability of the glass-ceramics is superior than that of glass. The leaching concentration of Fe for the glass-ceramics containing EAF dust 80 wt% is 1/15 times lower than that of glass. The Zn leaching concentration fur the glass-ceramics containing dust < 70 wt% was higher than that of glass but its trend was reversed for the specimen of dust content > 80 wt% which could be concluded as correlated with occurrence of willemite phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.112-118
• /
• 2018

In order to meet the strict emission regulations for internal combustion engines based on fossil fuel, the proportion of after-treatments for vehicles and vessels is gradually increasing. Diesel engines have high power, good fuel economy, and lower $CO_2$ emissions, and their market shares are increasing in commercial vehicles and passenger cars. However, NOx is generated in the localized high-temperature combustion regions, and particulate matter is formed in the zones of diffusion combustion. LNT and urea-SCR catalysts have been developed for after-treatment of the exhaust gas to reduce NOx in diesel vehicles. This study aims to improve the NOx reduction performance of Cu SCR catalyst, which is widely used in light, medium, and heavy-duty diesel engines. The de-NOx performance of $5Cu-2ZrO_2$/93Zeolyst(Si/Al=13.7) SCR catalyst was about 5-50% higher than that of $5Cu-2ZrO_2$/93Zeolite(Si/Al=2.9) at catalyst temperatures of $300^{\circ}C$ or higher. The zeolite had lower metal dispersion than zeolyst, and the reaction rate of the catalyst decreased as the average particle size increased. The $10Cu-2ZrO_2$/88Zeolyst catalyst loaded with 10wt% Cu had the highest NOx conversion rate of 40% at $200^{\circ}C$ and about 65% at $350^{\circ}C$. The ion exchange rate of Cu ions increased with that of Al, the crystalline compound of zeolite, and the de-NOx performance was improved by 20-40% compared to other catalysts.

• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.1015-1024
• /
• 2019

In the medical field, X-rays are essential in the diagnosis and treatment of diseases, and the use of X-rays continues to increase with the development of imaging technology, but X-rays have the disadvantage of radiation exposure. Although lead protection tools are used in clinical practice to protect against radiation exposure, lead is classified as a heavy metal and can cause harmful reactions such as lead poisoning. Therefore, the purpose of this study is to investigate the usefulness of the shield fabricated using materials of FDM (Fused Deposition Modeling) 3D printer. In order to confirm the filament's line attenuation factor, phantoms were fabricated using PLA, XT-CF20, Wood, Glow and Brass, and CT scan was performed. And the shielding sheet of 100 × 100 × 2 mm size was modeled, the dose and shielding rate was measured by using a diagnostic X-ray generator and irradiation dose meter, and the shielding rate with lead protection tools. As a result of the experiment, the CT number of the brass was measured to be the highest, and the shielding sheet was manufactured by using the brass. As a result of confirming with the diagnostic X-ray generator, the shielding rate was increased in the shielding sheet having a thickness of 6 mm upon X-ray irradiation under the condition of 100 kV and 40 mAs. It measured by 90% or more, and confirmed that the shielding rate is higher than apron 0.25 mmPb. As a result of this study, it was confirmed that the shield fabricated by 3D printing technology showed high shielding rate in the diagnostic X-ray region. there was.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.1
• /
• pp.10-14
• /
• 2012

Resveratrol is naturally occurring phytoalexin compounds produced by grape berries, peanuts, pine tree, mulberry fruits and their products in response to stress such as fungal infection, heavy metal ions or UV irradiation. The objective of this study was to determine resveratrol contents in wild-type mulberry leaves (Morus alba L., M. bombycis Koidz, and M. Lhou (Ser.) Koidz) collected from Won-ju, In-je and Yang-yang regions, Gangwon province, Korea. Resveratrol contents in wild-type mulberry leaves were higher in Autumn's than in Spring's, and higher than 16 cultivar's. Among the samples, 'No. 3', collected from Won-ju region and 'No. 7' collected from In-je showed high resveratrol contents of 539 and $491{\mu}g$/100 g DW (dry weight; DW), respectively, through the collection time. Therefore, two mulberry trees might be promising as potent resources for mulberry breeding and functional material development.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.560-566
• /
• 2008

In this paper, the solidification behaviour and compressive strength of fly ash, cement, and waste stone powder were studied each separately and with addition of each in different proportions. And also, we assessed stabilizing ability of waste stone powder in cement which was added in fly ash. The particle size of waste stone powder was found smaller than the fly ash and cement particle sizes. Moreover, when mixing all(fly ash, cement, and waste stone powder) showed distinctive crystal structure, and improved stiffness. In case of mixing fly ash, cement and waste stone powder in different proportions, the compressive strength was exceeded to the predicted compressive strength of 10 kgf/cm$^2$. The XRD analysis showed high contents of CaO in fly ash and SiO$_2$ in case of waste stone powder sample. Heavy metal emission experiment showed the 3mg/L of Pb after 14 days of mixing 150 kg/m$^3$ of cement with the 80$\sim$100 kg/m$^3$ of waste stone powder, which is fulfilling the National Waste Management Policy.