• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.123-135
• /
• 1997

In order to investigate the dispersion patterns and contamination level of heavy metals in the soil-ecosystem and to evaluate the efficiency of soil remediation by reversed soil method, soils and plants were collected from the Dongjin Au-Ag-Cu mine area and analysed for heavy metals. The dispersion patterns of heavy metals in soils and plants show that heavy metal pollutions caused by waste rump around Dongjin mine are mainly found in the vicinity of the waste rump and in the southward slanting of mine. Toxic metallic pollutants from the mine influence heavy metal contents in paddy soils in downstream area, and may be a potential sources of heavy metal pollution on crop plants. Soil samples collected from the remediated rice farming field by reversed method show similar levels of heavy metal content to those from the polluted rice farming field, but topsoil enrichment of heavy metals are not found. Heavy metal contents of the rice plants collected from remediated rice farming field are significantly lower than those from polluted rice farming field, and it suggests that the reversed soil method is effective for the reduction of bioavailability of heavy metals.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.379-385
• /
• 2005

This study was conducted to find out a useful bioremediation technology for heavy metal contaminated soil and water. We isolated strain CPB from heavy metal contaminated soil and evaluated the tolerance level and adsorption capacity of strain CPB to heavy metals (Strain is not determined yet). Strain CPB showed variable tolerance limit to different kinds heavy metal or concentrations of heavy metals. The growth of strain CPB was significantly inhibited by mixed heavy metals (Cd+Cu+Pb+Zn) than that of by single heavy metal. Strain CPB showed high binding capacity with Pb (Pb>Cd>Cu>Zn). In general, strain CPB showed high uptake of heavy metals such as Pb, Cd and Cu. It was observed that the capacity of heavy metal uptake from mixture of heavy metals was reduced in comparison with single heavy metal treatment. But total contents of heavy metal bound with cell in mixed heavy metal showed higher than in single heavy metal treatment. Heavy metal adsorption in cells was affected by several external factors, such as temperature and pH etc.. The optimum temperature and pH of the adsorption of heavy metal into cells were ca. $25{\sim}35^{\circ}C$ and pH ca. $5{\sim}7$, respectively. A large number of the electron dense particles were found mainly on the cell wall and cell membrane fractions, which was determined by transmission electron microscope. Energy dispersive X-ray spectroscopy revealed that the electron dense particles were the heavy metal complexes the substances binding with heavy metals.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.6
• /
• pp.95-105
• /
• 2011

Total extraction method and environmental standards for heavy metals in soils were revised in regulation recently. In case of Area 3, as the law amended, the soil pollution level has gone up to 4 to 13 times higher depending on the type of heavy metal. In this study, it compares the properties of heavy metals of soil by sequential extraction and total extraction methods depending on the analysis method, using the soil around mine. In case of arsenic, the soil pollution level has gone up to 4 times higher, but 6 to 10 times in the sample soil. Also, according to the results of portability evaluation depending on the type of existence form of heavy metal it exists as residual form in mine waste rock, which is less likely to move, while it exists as migrated form in tailing. Therefore, it should be considered to evaluate the soil pollution and decide the contaminated bounds depending on the existence form of heavy metals on soil to restore the polluted soil.

• Journal of Environmental Science International
• /
• v.14 no.2
• /
• pp.185-192
• /
• 2005

The concentration of heavy metal were studied for the estimation of quality in herbal medicines which is Bupleuri Radix, Paeoniae Radix, Dioscoreae Rhizoma and Astragali Radix in products of north Gyeongbuk area Also, we collected soils from several area in Gyeongbuk, and determined heavy metal concentration of soils by ICP. We compared with herbal medicines in products of Gyeongbuk and their soils. The average levels of heavy metal of herbal medicines in Gyeongbuk area are as follows: Mercury is 0.037mg/kg, Chromium is 0.093 mg/kg, Nickel is 0.108mg/kg, Copper is 0.475mg/kg, Zinc is 3.14mg/kg, Manganese is 1.52mg/kg, Iron is 7,83mg/kg, and Cadmium, Lead and Arsenic is not detected. It was very lower in concentrations than those of average Korea area. For the heavy metals contents of Gyeongbuk area, in Gong Jung Ri, represented the higher level, it may be due to a near the road. The Cd contents in soil was not a wide difference. For the As and Pb contents in soil, Song Sa Ri (Bupleuri Radix) represented the higher level(0.68mg/kg, 1523mg/kg). Correlation coefficients of heavy metal contents in cultured herbal medicines and their soils did not give reproducible results. But the degree of correlation between a few heavy metal contents of Dioscoreae Rhizoma and their soil showed the good transfer from the soil.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.47-57
• /
• 1992

This study was performed to evaluate contamination degree of heavy metals in sediments of Han River, compared with other nation's evaluation method. The results were as follows 1. The contamination Ratio calculation method by heavy metal concentration in differnt fraction size has a limitation to apply to all of the areas of Han river because of its characteristics of sediment. As a result, this method applied to only 4 areas of Pal Dang, Wang Sook Chon, Uk Chon, and Bul Kwang Chon, and Contmination Ratio of heavy metals in those areas were relatively low of below 3. So it's considered that those areas have less contaminated from anthropogenic contaminants. 2. The Contamination Ratio calculation method by heavy metal concentration in different areasthat of upper area to be background level-has a limitation also to apply to Han river. But it is considered that this method was relatively suitable to apply, so it should be prepared evaluation standand method for them. Contamination ratio from background level as Pal Dang area were most high in An Yang Chon. So it must be prepared purification and control measure at An Yang Chon.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.1
• /
• pp.60-66
• /
• 2021

BACKGROUND: The concern over heavy metal(loid)s in arable land and agricultural products increases for public health in recent years. This study aims to identify transition characteristics of heavy metal(loid)s and to assess dietary risk in barley grown at the major producing districts in Korea. METHODS AND RESULTS: The soil and barley samples were collected from 38 locations around the major producing districts at Jeollabuk-do in Korea for the propose of examining the concentrations of heavy metal(loid)s. The 34 barley samples were separately purchased on the market for the same survey. The average concentration and range of arsenic (As), cadmium (Cd) and lead (Pb) in barley grown at the major producing districts in Korea were 0.037 (0.016-0.094), 0.028 (0.004-0.083) and 0.137 (0.107-0.212) mg kg-1, respectively. Currently, the maximum allowable level for barley Pb is set at 0.2 mg kg-1 in Korea, and the monitoring results suggested that some samples exceeded the maximum allowable level and required appropriate farming management. Bio-concentration factor values by heavy metal(loid)s in barley were high at Cd, copper (Cu) and zinc (Zn), similar to other crops, while As and Pb were low, indicating low transferability. CONCLUSION: Human exposure to As, Cd and Pb through dietary intake of barley might not cause adverse health effects due to relatively low concentrations, although the Pb in some barley was detected higher than the maximum allowable level. Further study on uptake and accumulation mechanism of Pb by barley might be required to assess the human health risk associated with soil contamination.

• The Korean Journal of Ecology
• /
• v.22 no.2
• /
• pp.95-100
• /
• 1999

The heavy metal concentrations in seawater and winkles (Littorina brevicula) collected from the Onsan bay area in southeast of Korea were analyzed. The heavy metal concentrations in the seawater obtained from the most polluted site showed approximately 189. 205. and 110 fold higher cadmium, copper. and zinc concentrations, respectively. than the uncontaminated control site. The contamination levels of these metals in winkles were 11.08 - 2.35, 334.5 - 212.5, and 426.0 - 499.2$\mu\textrm{g}$ per gram dry body weight. respectively. The concentrations of all three metals in both the seawater and winkles decreased gradually with increasing distance from Daejeong stream, suggesting the stream being the major source of heavy metal input into the bay. Among the four body parts of digestive gland and gonad. gill. kidney, and remaining tissue in contaminated winkles, kidney showed the highest accumulation level of cadmium: copper and zinc, however. were more or less distributed among the four body parts. Upon gel filtration chromatography of the cytosol from the kidney of cadmium induced winkles, one cadmium peak corresponded to the elution peak of horse kidney metallothionein.

• Journal of Environmental Science International
• /
• v.17 no.1
• /
• pp.57-66
• /
• 2008

The frequency analysis and the probability plot were applied to heavy metal contents of soils collected from the Goseong Cu mine area as a statistic method for the determination of the threshold value which was able to partition a population comprising largely dispersed heavy metal contents into the background and the anomalous populations. Almost all the heavy metal contents of soil showed a positively skewed distributions and their cumulative percentage frequencies plotted as a curved lines on logarithmic probability plot which represent a mixture of two or more overlapping populations. Total Cu, Pb and Cd data and extractable Cu and Pb data could be partitioned into background and anomalous populations by using the inflection in each curve. The others showed a normally distributed population or an largely overlapped populations. The threshold values obtained from replotted frequency distributions with the partitioned populations were Cu 400 mg/kg, Pb 450 mg/kg and Cd 3.5 mg/kg in total contents and Cu 40 mg/kg and Pb 12 mg/kg in extractable contents, respectively. The thresholds for total contents are much higher than the tolerable level of soil pollution proposed by Kloke(Cu 100 mg/kg, Pb 100 mg/kg, Cd 3 mg/kg), but those for extractable contents are not exceeded the worrying level of soil pollution proposed by Ministry of Environment(Cu 50 mg/kg, Pb 100 mg/kg). When the threshold values were used as the criteria of soil pollution in the study area, $9{\sim}19%$ of investigated soil population was in polluted level. The spatial distributions of heavy metal contents greater than threshold values showed that polluted soils with heavy metals are restricted within the mountain soils in the vicinity of abandoned mines.

• Journal of Fashion Business
• /
• v.19 no.3
• /
• pp.113-120
• /
• 2015

Heavy metal ingredients of eyeliner product could cause side effect ranging from simple irritation, keratitis, corneal epithelium inflammation, eyelid dermatitis and dry eye symptoms have been reported. This study was conducted in order to prepare fundamental data for acceptable quality level heavy metal ingredients in the domestic and foreign cosmetic brand eyeliner products and to assess theirs the heavy metal concentrations. We measured the concentration of 5 heavy metals in 10 eyeliner products using ICP/MS-LC. According to the results, the average metal concentrations were as follows.; In case of domestic eyeliner products, 289.4 ppm for aluminium(Al), 304 ppm for manganese(Mn), 44 ppm for nickel(Ni), 0.58 ppm for arsenic(As) and 0.35 ppm for lead(Pb). In case of Foreign eyeliner products, 11337.8 ppm for aluminium(Al), 1678.8 ppm for manganese(Mn), 74.2 ppm for nickel(Ni), 1 ppm for arsenic(As) and 0.8 ppm for lead(Pb). Foreign products contained higher amounts of the two elements(Pb, As) compared to domestic ones. Also, greater concentrations of arsenic(As) were detected from waterproof products than non-waterproof ones. In conclusion, for safety reasons we suggested the amounts of heavy metals from the domestic and foreign eyeliner products. This finding will be helpful to provide the fundamental data which is standard of toxicological heavy metals acceptable on eyeliner products.

• Journal of Soil and Groundwater Environment
• /
• v.16 no.4
• /
• pp.23-30
• /
• 2011

Risk based pollution level of Pb and Cd in metal contaminated soils depending on physicochemical properties of soil in a target site was assessed using biotic ligand model. Heavy metal activity in soil solution defined as exposure activity (EA) was assumed to be toxic to Vibrio fischeri and soil organisms. Predicted effective activity (PEA) determined by biotic ligand model was compared to EA value to calculate risk quotient. Field contaminated soils (n = 10) were collected from a formes area and their risk based pollution levels were assessed in the present study using the calculated risk quotient. Concentrations of Pb determined by aqua regia were 295, 258, and 268 mg/kg in B, H and J points and concentrations of Cd were 4.73 and 6.36 mg/kg in G and I points, respectively. These points exceeded the current soil conservation standards. However, risk based pollution levels of the ten points were not able to be calculated because concentrations of Pb and Cd in soil solution were smaller than detection limits or one (i.e., non toxic). It was because heavy metal activity in soil solution was dominant toxicological form to organisms, not a total heavy metal concentration in soil. In addition, heavy metal toxicity was decreased by competition effect of major cations and formation of complex with dissolved organic carbon in soil solution. Therefore, it is essential to consider site-specific factors affecting bioavailability and toxicity for estimating reliable risk of Pb and Cd.