• 제목/요약/키워드: heavy metal elements

검색결과 238건 처리시간 0.022초

삼천포와 서천 화력발전소에서 발생하는 석탄회중의 중금속 함량에 관한 연구 (Content of Heavy Metals in Coal Fly Ash from the Samcheonpo and the Seocheon Power Plant)

  • 윤정한;오근창;김용웅;신방섭
    • 자원환경지질
    • /
    • 제28권2호
    • /
    • pp.147-154
    • /
    • 1995
  • Coal fly ashes collected from the Samcheonpo and the Seocheon Power Plants were analyzed for major and minor components and heavy metals such as As, Cd, Co, Cr, Cu, Ga, Hg, Mo, Ni, Pb, Sb, V and Zn in order to suggest basic data to apply coal fly ash as fertilizer or soil ameliorator. The specific gravity of the samples was less than 2.0, and amounts of organic matter range from 5.0% to 12.3%. The identified minerals by XRD were mainly quartz, mullite and pyrite in anthracite coal, and mainly quartz and mullite in bituminous coal. Generally, the contents of heavy metal elements analyzed were lower less than those of soil, though higher in some samples. Element couples of some elements( e.g., As-Mo, Zn ; Mo-As, Sb, V, Zn ; Sb-Zn ) show positive correlations with each other, but the high correlations of toxic elements such as As, Pb, Cd and Hg indicate to give attention to apply coal fly ash as fertilizer or soil ameliorator.

  • PDF

Size Distribution and Source Identification of Airborne Particulate Matter and Metallic Elements in a Typical Industrial City

  • Ny, Mai Tra;Lee, Byeong-Kyu
    • Asian Journal of Atmospheric Environment
    • /
    • 제4권1호
    • /
    • pp.9-19
    • /
    • 2010
  • The size distribution of airborne particulate matter (PM) and the concentrations of associated metallic elements were investigated in a busy urban region of a typical Korean industrial city. The PM concentrations measured during the spring, except for those in the size range of 1.1 to 2.1 ${\mu}m$, were slightly higher than the PM concentrations in the summer. Coarse particles contributed greatly to the variation in PM concentrations in the spring, while fine and submicron particles contributed largely to the variation in PM concentrations in the summer. The difference in size modes of the PM concentrations between spring and summer may be explained by the Asian dust effect and its accompanying wind direction and speed. Extremely high enrichment factors (EFs) values (6,971 to 60,966) for all of the size distributions in PM were identified for cadmium (Cd). High EFs values (12 to 907) were also identified for other heavy metals including Cr, Cu, Ni, Pb, Zn and Mn. Low EF values (0.29 to 8.61) were identified for Ca, K, Mg and Na. These results support the common hypothesis that most heavy metals in ambient PM have anthropogenic sources and most light metals have crustal sources. The results of principal components analyses and cluster analyses for heavy metals indicate that the principal sources of PM and metals were emissions from non-ferrous metal smelters, oil combustion, incinerators, vehicular traffic and road dust.

정밀금형 알루미늄 합금주조공정시 주물/금형 접촉면에서의 Inverse 열전달해석에 관한 연구 (Inverse Heat Transfer Analysis at the Mold/Casting Interface in the Aluminum Alloy Casting Process with Precision Metal Mold)

  • 문수동;강신일
    • 한국주조공학회지
    • /
    • 제18권3호
    • /
    • pp.246-253
    • /
    • 1998
  • Precision metal mold casting process is a casting method manufacturing mechanical elements with high precision, having heavy/light alloys as casting materials and using permanent mold. To improve dimensional accuracy and the final mechanical properties of the castings, the solidification speed and the cooling rate of the casting should be controlled with the optimum mold cooling system, and moreover, to obtain more accurate control of the whole process interfacial heat transfer characteristic at the mold/casting interface must be studied in advance. In the present study, aluminum alloy casting system with metal mold equipped with electrical heating elements and water cooling system was designed and the temperature histories at points inside the metal mold were measured during the casting process. The heat transfer phenomena at the mold/casting interface was characterized by the heat flux between solidifying casting metal and metal mold, and the heat flux history was obtained using inverse heat conduction method. The effect of mold cooling condition upon the heat flux profile was examined, and the analysis shows that the heat flux value has its maximum at the beginning of the process.

  • PDF

시화호의 퇴적환경과 중금속오염 (Sedimentary Environments and Heavy Metallic Pollution at Shihwa Lake)

  • 현상민;천종화;이희일
    • 한국해양학회지:바다
    • /
    • 제4권3호
    • /
    • pp.198-207
    • /
    • 1999
  • 시화호 내 5개 정점에서 채취한 주상시료들을 지화학적으로 분석하여 시화방조제 건설이후 퇴적환경 및 중금속오염에 대해 연구하였다. 시화호내 퇴적환경은 유기물의 C/N비와 C/S비에 의해 무산소환경, 산화환경, 그리고 두 환경이 공존하는 지역으로 세분되었다. 산화환원환경을 지배하는 요인은 수심과 퇴적물의 공급차인것으로 사료된다. 주상시료에서 분석된 지화학적 원소중 Mn-U-Mo간의 상관관계는 각 정점간의 산화 환원환경의 지시자로 사용이 가능하다. 주상시료들의 Al과 Ti 함량은 퇴적물특성에 의해 구분되며, 5개 중금속(Cr, Ni, Cu, Zn 및 Pb)함량은 중금속에 의한 오염정도를 지시한다. 중금속의 상대적 함량은 방조제에 가까운 시화호 중심부분에서 보다 안산-반월공단에 가까운 지역에서 높게 축적되어 있다. 특히 주상시료의 표층퇴적물은 시화호 중앙부보다 시화-반월공단쪽이 약 2-8배 정도로 중금속축적이 높다.

  • PDF

안동・임하호 저니토의 토양 성분과 중금속 용출 특성 (Soil Components and Elution Characteristics of Heavy Metals in Sediments of Andong and Imha Reservoir)

  • 서을원;김연정;백승철
    • 한국지반환경공학회 논문집
    • /
    • 제9권4호
    • /
    • pp.47-52
    • /
    • 2008
  • 본 연구는 안동지역에 소재하는 안동 임하호 저니토가 호소수에 미치는 영향을 조사하기 위하여 안동호와 임하호 6개 지역에서 채취한 저니토의 토양성분과 중금속 용출 특성을 분석하였다. 대부분의 저니토는 illite(I), kaolinite(Ka), quartz(Q) 및 feldspar(F)로 구성되어 있다. 저니토에 포함된 중금속 중 아연(Zn), 비소(As), 크롬(Cr), 구리(Cu), 납(Pb)의 농도는 임하호에 비하여 안동호에서 상대적으로 높게 나타났다. 특히 안동호의 저니토에서는 다른 중금속들에 비해 비소(As)와 아연(Zn)의 용출이 크게 나타났다. 저니토를 이용한 흡착실험에서는 아연(Zn), 카드늄(Cd) 및 구리(Cu)의 흡착은 적게 일어난 반면 납(Pb)과 크롬(Cr)은 높은 흡착력을 보여주었다.

  • PDF

비소 및 중금속의 식물체 전이감소를 위한 철 나노 입자가 담지된 바이오차의 농경지 토양 안정화제 적용성 평가 (Stabilization of As and Heavy Metals in Farmland Soil using Iron Nanoparticles Impregnated Biochar)

  • 고일하;김정은;박소영;최유림;김동수;문덕현;장윤영
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제27권6호
    • /
    • pp.1-10
    • /
    • 2022
  • This study assessed the feasibility of iron oxide nanoparticles impregnated with biochar (INPBC), derived from woody biomass, as a stabilizing agent for the stabilization of farmland soil in the vicinity of an abandoned mine through pot experiments with 28 days of lettuce growth. The lettuce grown in the INPBC amended soils increased by more than 100% and the concentrations of inorganic elements (Cu, Ni, Zn) decreased by more than 40%. As, Cd and Pb were not transferred properly from the soils to the lettuce biomass. The bioavailability of arsenic and heavy metals in the INPBC amended soils were decreased by 26%~50%. It seems that the major mechanisms of stabilization were arsenic adsorption on iron oxides, heavy metal precipitation by soil pH increasing and heavy metal adsorption on organic matter. These results revealed that the lower bioavailability of the inorganic pollutants in the soils stabilized using INPBC induced lower transfer to the lettuce. Thus, INPBC could be used as an amendment material for the stabilization of farmland soils contaminated by arsenic and heavy metals. However, a pre-review of the chemical properties of the amended soil must be performed prior to applying INPBC in farmland soil because the concentration of the nutrients in the soil such as available phosphates and exchangeable cations (Ca, Mg, K) could be decreased due to adsorption on the surface of the iron oxides and organic matter.

Arsenic and heavy metal contamination in the vicinity of the abandoned Dongjung Au-Ag-Cu mine, Korea

  • Chung EunHye;Lee Jin-Soo;Chon Hyo-Taek;Sager Manfred
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.536-539
    • /
    • 2003
  • The Dongjung Au-Ag-Cu mine area was seriously contaminated with As and heavy metals-Cd, Cu, Hg, Mn, Pb and Zn etc. Those elements were highly accumulated in plants grown at farmland as well as farmland soil. Stream waters and groundwater which has been used as drinking water around the mine site contain high levels of heavy metals, especially As. As a result of human health risk assessment using EHS(Extraction of Heavy metals in Stomach and Small intestine) test for bioaccessible contents of heavy metals, there is a potential of cancer and adverse effects on human health for the residents of the mine area.

  • PDF

동진 금·은·동 광산 주변에 방치된 폐석의 환경적 영향 (Environmental Impacts of the Waste Rump in the Dongjin Gold-Silver-Copper Mine)

  • 이무성;전서령;나춘기;정재일
    • 자원환경지질
    • /
    • 제29권1호
    • /
    • pp.45-55
    • /
    • 1996
  • Although the Dongjin Au-Ag-Cu mine had been abandoned since about forty years ago, the results of this study on the dispersion patterns and contamination level of heavy metals in the hydrologic system flowing via the waste rump show that the environmental impacts from the mine wastes are still significant. The stream water in the vicinity of the waste rump is severely acidified (pH 3.8 to 4.4) and highly enriched in various dissolved heavy metals. The heavy metal contents of the stream water and stream sediments are systematically attenuated with increasing distance from the mine area. However, it is worth to note that continuous attenuation of heavy metal contents in both media were reenriched in downstream area more than 800 m apart from the mine because it can be acted as a secondary source of heavy metal pollution. The heavy metals, especially Cd, Cu and Zn of polluted downstream sediments mainly occur in Fe-Mn oxides and organic materials, which indicates that these elements are the main pollutants from the waste rump of the Dongjin mine. The heavy metal contents of crops, such as sesame, perilla, red Pepper and brown rice, collected from the polluted farm land in the downstream area are lower than those of land plants from stream sides, but significantly higher in Cd, Cr, Cu and Zn than those from the unpolluted farm land. Especially, almost all of the crops in polluted farm land have been severly contaminated by Cd (>0.4 ppm). On the other hand, the heavy metal contents of the crops collected from refreshed farm land by means of a soil addition method shows significantly lowered level comparing with those of polluted area, which indicates that a soil addition method was effective for the refreshment of polluted farm land by toxic metallic pollutants. Wormwoods from this area showed very high contents in a11 the heavy metals even in unpolluted area (Cd > 1 ppm, Cr > 1 ppm, Cu > 11 ppm, Pb> 4 ppm, Zn > 55 ppm), indicating that a special caution must be payed when one takes ingest them.

  • PDF

Extractable Heavy Metals in Phosphogypsum

  • Chung, Jong-Bae;Cho, Hyun-Jong;Jin, Sun-Jae
    • 한국환경농학회지
    • /
    • 제21권3호
    • /
    • pp.223-228
    • /
    • 2002
  • In addition to supplying the essential elements, Ca and S, phosphogypsum can have profound effect on both the physical and chemical properties of certain soils. However, no widespread use of by-product phosphogypsum will be made unless such uses pose no threat to the public health and soil contamination. In this study, the extractability of As, Cd, Cu, and Pb with water and DTPA solution from phosphogypsum samples of pH 3, 5, and 7 were investigated to estimate the availability of those metals. Contents of water extractable metals in ohosphogypsum were less than 5 mg/kg for all the heavy metals investigated. The extractability of metals in DTPA solution was not quite different but a little higher in comparison to the water extraction. And the extractability was decreased as the pH of phosphogypsum increased. In the phosphogypsum of pH 7, amounts of water extractable metals were nearly zero. There was no significant difference in the amount of extractable metals during the extraction period of 5 weeks. The length of extraction time did not affect heavy metal extractability. Therefore there may be small fractions of easily soluble or extractable forms of metals in the phosphogypsum and most of the metals would be present in very insoluble forms. These results suggest that the application of phosphogypsum at appropriate rates on agricultural lands appears of no concern in terms of hazardous element contamination in soil.