• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.5
• /
• pp.1029-1036
• /
• 2018

This paper is a study on the development of optimal control system for lighting and air conditioning equipment to save the energy in campus environment. In the case of controling system developed through this research, lighting and air conditioner are controlled by both information on the number of people entering and leaving the room through the motion sensor and image processing, and the information on temperature and humidity. In addition, energy saving is enabled by the results that are controlled through data integration monitoring and command execution functions according to the control signals.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.746-749
• /
• 2019

자유 단조는 고온에 가열한 강괴에 높은 압력을 가하여 원하는 형상의 제품을 만드는 공정으로 에너지 소모가 매우 크다. 여러 개의 강괴를 가열로에 장입하여 고온에 가열한 후 소재를 하나씩 꺼내어 프레스 공정을 수행한다. 가열로에 함께 장입되는 소재들의 조합에 따라 가열 시 소요 시간 및 에너지 사용량이 달라진다. 소재 조합에 따른 가열 비용 예측을 통해 최적의 소재 조합을 결정하여 에너지 효율을 높일 수 있다. 비용 예측 모형을 학습하기 위해서는 가열 소요 시간 및 에너지 사용량 데이터가 필요하다. 따라서 본 논문에서는 가열로의 온도 및 가스 사용량 데이터를 이용하여 가열로의 가동 상태 변경 지점을 감지하는 방안을 제안한다. 가열로의 온도 및 가스 사용량은 IoT 인프라를 기반으로 손 쉽게 획득할 수 있다. 가열로의 상태 별로 온도 및 가스 사용량에 나타나는 패턴을 이용하여 상태 변경 지점을 감지한다. 이를 통해 가열 공정 데이터를 획득할 수 있을 뿐만 아니라 가열로의 상태를 실시간에 모니터링이 가능함으로써 불필요하게 가열하는 것을 예방하여 에너지 효율을 높일 수 있다.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2007.11a
• /
• pp.570-578
• /
• 2007

선체 외판 부재의 곡 성형 과정은 주로 가열(열간가공)에 의해 수행된다. 이 가열 작업은 작업자의 경험과 지식에 크게 의존하는 매우 어려운 작업이다. 본 논문에서는 선체 외판의 곡 성형을 위한 가열 계획을 자동으로 수립할 수 있는 휴리스틱을 소개한다. 현장 전문가의 지식에 기반한 이 휴리스틱은 크게 가열 선을 생성하는 부분과 외력을 주는 도구를 배치하는 부분으로 구성된다. 가열 선은 대상 부재의 현재 곡면과 설계된 목적곡면과의 비교를 통해 생성되고, 가우스 커널 함수를 통해 스무딩(smoothing)된다. 현장에서는 열간가공 시 의도하지 않은 변형을 막으면서 작업시간을 줄이고자 외력을 이용한다. 외력의 위치와 방향은 가열 선 군집화를 통해 추출된 대표 가열 선을 기준으로 결정된다. 가상의 인공 곡면과 현장의 실제 부재를 대상으로 실험한 결과, 이 휴리스틱이 숙련된 전문가가 수립한 가열 계획과 유사한 가열 계획을 수립할 수 있음을 확인하였다.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.249-254
• /
• 2000

Heating supply system using solar energy-collecting plate was examined for 20 farmers. Some problems, resolution, future energy system, and basic information were discussed, Installation cost was approximately 18 million won/20a. Main crops cultured were tomato(30%) and floricultural crop(40%). Minor crops cultured were grape, red pepper, cucumber, lettuce, and strawberry. Information was mostly obtained from agricultural service agents. 75% of farm house hold reported that energy reduction effect was below 20%, showing some different result compared with over 20% that was totalized from agricultural service agents. Cost of installation was excessive in considering energy reduction effect. Another problem was insufficient technical proficiency of solar energy company.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.163-172
• /
• 2022

Purpose: To secure efficient thermal management technology for Li-ion batteries, the applicability of the system applied with single-phase immersion technology was checked through an experiment. Method: Using JH3 pouch cells produced by LG-Chem, Korea, A 14S2P module was manufactured and immersed in a vegetable-based cooling fluid produced by Cargill, USA, and then charged and discharged at a rate of 0.3C to 1C to check the heat distribution. Result: It was possible to manage and there was no change in the molecular structure of the immersion solution. Conclusion: It was confirmed that the immersion cooling method can be applied to the thermal management of Li-ion batteries.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.194-201
• /
• 2012

Moxibustion is utilized not only to cure disease but also to increase immunity. However, it may lead to undesired effects including severe pains(blisters and burns) because of the difficulty of controlling heat intensity. To overcome these problems we developed the RF heat stimulation system which can control stimulus. Also, we developed the RF stimulation protocol for effective heat transfer in subcutaneous tissue of rabbit. RF stimulator consists of a medical RF capacitive heating device, isolation probe, isolation plate, negative pressure control part and temperature measurement part. For the designed stimulus protocol, we measured the temperature distribution on epidermis and in subcutaneous(5mm, 10mm) area of rabbit during moxibustion. A stimulation protocol was designed by controlling the ON/OFF duty ratio, repeating number, and energy of applied pulse to get the temperature distribution similar with that by moxibustion. In results, the correlation coefficients between temperature distribution by moxibustion and that of stimulator were 95% and 91% from 5mm and 10mm thick respectively. However, temperature distribution on epidermis by stimulator was remarkably lower than that of the moxibustion. Finally, the RF stimulation system showed that it can not only transfer effectively heat similar with moxibustion to the subcutaneous area, but also the influence by unwanted side effects can be minimized.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.10
• /
• pp.123-130
• /
• 2016

High-frequency induction heating equipment can heat the metal by applying a High-Frequency power to the resonant circuit. The resonance circuit is composed of the work coil and the conduction-cooled power capacitor, it influences the performance of the heat treatment equipment according to the characteristics of the capacitor. However, dependence on conduction-cooled power capacitor's import is high due to lack of core technology research and development. Minimizing the generation of internal heat transmitted inside during LC resonance, reduce the reactive power loss, there is a need for a capacitor within the voltage characteristic outstanding. To implement localization it is vital that prior study of the analysis on the frequency response characteristic for the finished capacitor advanced manufacturer be implemented. Studying the interpolation method to read the value at any point of the characteristic curve for a given log-log scale was applied to the analysis tool of the capacitor by my proposed algorithm. The simulation for reproducing frequency response curves was attempted by assuming a capacitor in a simplified series equivalent RC circuit to obtain the equivalent series resistance value. It was confirmed that the reproduction rate was the result value above 83% as compared to the simulation of the properties and characteristics on the actual reactive power for Peak value, and that the algorithm can be applicable when analyzing and predicting the characteristic curves of a simpled model capacitor.

• Journal of the Society of Disaster Information
• /
• v.10 no.1
• /
• pp.71-83
• /
• 2014

This study carried out an experiment in order to compare thermal characteristics after collecting dust generated in the process of disposing of waste tire, plywood flour in the process of manufacturing plywood, salicylic acid dust in the process of manufacturing functional soap, and dust in the process of manufacturing wheat powder, which has potential fire and explosion hazard. According to the results of experiment, the analysis showed that all samples subject to the experiment were in the condition where heat flux decreased and temperature decreased as the quantity of added talc was increased. This shows that decomposition rate decreased, and hazard decreased. However, in all of samples subject to the experiment, as heating rate increased, endothermic onset temperature moved to the low-temperature part, and the amount of absorbed heat was largely increased. This showed that the decomposition hazard of sample increased as heating rate increased, according to the analysis. Besides, TGA experiment results showed that thermal stability was secured because total weight loss decreased as the amount of talc was increased for all samples subject to the experiment regarding the ratio of weight loss. It is expected that the continuous research and supplementation of dust explosion mechanism in the future will contribute to the establishment of measures for the effective dust explosion prevention.

• Journal of Platform Technology
• /
• v.6 no.3
• /
• pp.17-22
• /
• 2018

Smart home is a technology for monitoring and controlling all the information about a house by integrating various home applications like cooling, heating, lighting, kitchen and security systems into a network. Although home appliances have become more convenient to use due to the development of smart home technology, they are also more vulnerable to information security hazards. Unauthorized visitors may have access to any of home appliance to arbitrarily control it or acquire information. This causes serious privacy and security problems, which should be solved to further smart home technology. This present paper proposed a dynamic user access control system for privacy protection in smart homes. The proposed system defines the role of a user of smart home services by automatically identifying the status information of the user and dynamically controls the access range for the service. In this way, the privacy of a user can be protected and the inter-smart device service is effectively provided. Consequently, the proposed dynamic user access control for smart home will improve the security service for protecting privacy in smart home devices.

• Korean Journal of Acupuncture
• /
• v.38 no.4
• /
• pp.209-221
• /
• 2021

Objectives : The aim of this study was to compare and analyze studies related to fire acupuncture (FA) published in South and North Korea. Methods : FA studies published in South Korea were searched through domestic and overseas databases (KISS, RISS, OASIS, and EMBASE). For North Korean studies, databases from the Information Center on North Korea and Korea Institute of Science and Technology Information were used. Among the searched literatures, clinical studies using FA as a treatment intervention were selected (i.e., randomized controlled trials, and case reports). Finally, information such as the disease for which FA was used, the characteristics of FA, and details of treatment methods for FA were extracted from the screened literatures and the results of South and North Korean studies were compared and analyzed. Results : This review included 28 South Korean studies and 9 North Korean studies. All studies in South Korea, except for the three articles that used traditional FA treatment, applied "warm needling"-like acupuncture (WA) in the form of heating the handle of the needle after inserting the needle into the skin, and most studies were conducted on diseases of the musculoskeletal system. Whereas in the North Korean studies, FA was applied to various diseases such as trigeminal neuralgia, skin diseases, and gastrointestinal diseases, and standardized FA tools were used. Conclusions : Studies on traditional FA treatment have rarely been reported in South Korea. The amount of information described in the FA studies in North Korea was limited. In this review, the characteristics of FA treatment tools in South and North Korean studies were mainly analyzed. In the future, FA studies from more diverse perspectives are needed.