• 제목/요약/키워드: heating information

검색결과 516건 처리시간 0.024초

발열 필름을 이용한 제설 기능 PV module & system 제작 및 특성평가 (A Study on the Fabrication and Characteristics of Snow Removal PV Module & System using Heating Film)

  • 박은비;조근영;조성배;김현준;유정재;박지홍
    • Current Photovoltaic Research
    • /
    • 제4권4호
    • /
    • pp.159-163
    • /
    • 2016
  • Piled snow upon PV module interferes with Photoelectric Effect process through photovoltaic directly. As a result of this phenomenon, its generation efficiencies keep decreasing or are stuck at zero power generating status. In addition, PV facilities have been installed on those places such as water surface, roof-top, and other isolated places, dealing with conditions of "Securing high REC weighted value", "Difficulty of securing land" and so forth. Through this study, we are able to actualize the function of heating over PV modules when it snows. We adopted laminating method through heating film and modules, guaranteeing warranty more than for 25 years. Also we are trying remote control systemically, not by hardware control, to run parallel with automatic driving and monitoring system which enable to control operation time, insolation, amount of snowfall automatically. We applied analysis of actual proof to both snow removal PV system and general PV power system, and these led to bear power consumption analysis while snow-removing, and its comparison after finishing the task as "One stone, two birds." In the long run, we could carry out economic analysis against snow removal system, and this helps to verify the most maximized control method for snow removal conditons on a basis of weather information. this study shall let prevent people from negligent accidents, and improve power generation problems as mentioned from the top. Ultimately, we expect to apply this system to heavy snowfall regions in winter season in spite of its limited system installaion in Korean territory, initially.

뽕나무(Morus alba L.)의 RAPD 분석조건 최적화에 관한 연구 (Optimization of RAPD-FCR Conditions for Morus alba L.)

  • 정대수;양보경;김나영;정순재;남재성;이영병;이재헌;김경태;김도훈
    • 생명과학회지
    • /
    • 제14권1호
    • /
    • pp.110-114
    • /
    • 2004
  • 본 연구는 뽕나무 품종간의 유전적 특성 분석을 위한 기초 자료로서 최적의 RAPD-PCR 조건을 확립하기 위하여 수행하였다. 본 연구를 위해 '밀성뽕', '청일뽕', '수일뽕' 그리고 한성뽕'등의 4품종을 이용하여 Operon사의 OPY15 (5'-AG-TCGCCCTT-3') primer를 사용, 여러 가지 PCR 조건하에서 실험하였다. DNA 농도, primer농도, $MgCl_2$ 농도, PCR 횟수, annealing temperature, pre-heating time의 조작유무 등 여러 가지 요인들을 대상으로 시험을 수행한 결과, $25 \mu$ 반응용액을 기준으로 50 ng의 template DNA, $1 \muM$의 random primer, 1.5 mM의$MgCl_2$45회의 PCR cycle, 45$^{\circ}C$의 annealing temperature 그리고 pre-heating time이 없는 조건이 최적으로 나타났다. 이러한 RAPD-PCR법의 안정적인 조건의 확립은 후차적인 뽕나무 품종간의 유전적 특성의 규명, 계통간의 관련, 신품종 육성 등을 위한 중요한 기초 자료로 활용될 것으로 생각된다.

폐폴리우레탄의 열적 산화분해에 대한 속도론적 연구 (A Kinetic Study of Thermal-Oxidative Decomposition of Waste Polyurethane)

  • 전현철;오세천;이해평;김희택
    • 공업화학
    • /
    • 제17권3호
    • /
    • pp.296-302
    • /
    • 2006
  • 산소농도에 따른 폐폴리우레탄의 열적 산화분해에 관한 속도론적 연구를 $10{\sim}50^{\circ}C/min$ 사이의 여러 가열속도에서 비등온 질량감소 기술을 이용하여 수행하였다. 폐폴리우레탄의 열적 산화분해를 묘사하기 위하여 Arrhenius식에 근거한 미분법과 적분법을 이용하여 산소농도에 대한 영향을 고려할 수 있는 속도론 모델을 제시하였으며 활성화 에너지 및 반응차수 그리고 pre-exponential 인자와 같은 속도 상수들에 대한 정보를 얻기 위하여 본 연구에서 제시한 속도론 해석 방법을 이용하여 질량감소 곡선 및 그 미분값을 해석하였다. 본 연구로부터 산소농도에 대한 반응차수는 모두 음의 값을 나타내었으며 활성화 에너지는 산소농도가 증가함에 따라 감소함을 확인할 수 있었다. 또한 단일 가열속도에서의 실험값을 이용하는 적분법의 경우 가열속도에 따라 반응속도 상수의 값이 변화함을 알 수 있었다. 따라서 여러 가열속도에서의 실험값을 이용하는 미분법이 폐폴리우레탄의 열적 산화분해 반응을 보다 효율적으로 나타내고 있는 것으로 판단된다.

전남지역 오리 사육시설 실태 조사 및 분석 (Investigations and Analyses of Duck Breeding Facilities in Jeollanam-do Province, Korea)

  • 권경석;양가영;김종복;김중곤;장동화;최성민;이상연
    • 한국농공학회논문집
    • /
    • 제63권1호
    • /
    • pp.1-9
    • /
    • 2021
  • Number of duck and its breeding facilities have been steadily decreasing for financial and social issues in Korea. Therefore, the 'turning point' for duck industry is strongly demanded. In this study, the questionary survey was carried out to provide backgrounds for developing policy and technology for duck breeding farms. The questionary survey aimed to investigate the information of operation strategy of farm, ventilation, cooling and heating. The total number of survey respondents was 74. In case of facility type, 55.4% of respondents stated they used greenhouse type, 31.3% for winch-curtain type, and 2.7% for windowless type (mechanically ventilated facility). More than 85% of the facilities were using 'natural ventilation', it meant that these situation can restrict the not only environmental control but also the supply policy for 'smart farm' of the Government. 44.6% used the combination of the cross-ventilation method and roof-ventilation method for ventilation operation in summer season, and 31.1% followed only the cross-ventilation method. In case of winter season, 36.5% used the cross-ventilation method, and 33.3% used the combination of cross and roof-ventilation, method. For the ventilation strategy, about 86.5% depended on farmer's experience. In case of heating and cooling, 79.7% were using kerosene heater for winter season, and 43.2% were using mist-spray for summer season, respectively. More than 75% stated that cooling and heating strategies were based on farmer's experience. From the analyses of the survey results, a few proposals for developing policy and technology for duck breeding farm was suggested.

지역난방 공동주택의 에너지 성능 평가를 위한 공동주택 단지별 에너지사용량 Database 구축 (Establishing a Energy Utilization Database for Energy Performance Evaluation of Multi-Family Housing using District Heating)

  • 정재욱;홍태훈;지창윤;이승복
    • 한국건설관리학회논문집
    • /
    • 제16권5호
    • /
    • pp.105-113
    • /
    • 2015
  • 건축물의 에너지성능을 평가하기 위해서는 운영단계의 신뢰도 높은 에너지 사용량 정보를 파악하는 것이 중요하며, 이를 위해서는 객관적 분류체계에 따라 도출된 일정규모이상의 모집단을 갖는 database의 구축이 필요하다. 본 연구에서는 지역난방 공동주택의 에너지 성능을 종합적으로 평가할 수 있는 에너지원을 반영하고, 서울 및 수도권 도시에 대한 폭넓은 조사로 충분한 수의 모집단을 확보하며, 다양한 Data source를 이용한 상호검증과 통계적 기법을 통해 1차 에너지사용량과 $CO_2$ 배출량을 포함한 325개 단지의 database를 구축하였다. 추가적으로 향후 관련 연구의 발전을 위해 국토교통부에서 구축한 공동주택정보관리시스템의 개선 필요사항을 제안하였다.

지방 조직 유화를 위한 집속형 초음파 변환기 설계 및 제작에 관한 연구 (A Study on the Design and Fabrication of Fat Emulsification Adapted Focused Ultrasonic Transducer)

  • 김주영;김재영;정현두;노시철;문창수;문치웅;최흥호
    • 전자공학회논문지
    • /
    • 제52권11호
    • /
    • pp.127-134
    • /
    • 2015
  • 초음파를 이용한 조직 자극 기법은 지속적으로 연구, 개발되고 있으며, 최근 미용 및 비만 치료에 대한 관심이 높아짐에 따라 초음파 지방 제거술에 대한 다양한 연구가 진행되고 있다. 본 연구에서는 초음파 지방 제거술을 위한 초음파 변환기를 설계하고, 조사조건에 따른 집속영역의 형태와 열 변성 영역을 시뮬레이션 하였다. 이를 통하여 제원을 검증하였으며, 제작된 변환기의 초음파 방사 특성 및 가열 특성을 측정하여 유효성을 평가하였다. 또한 복합 구조의 매질을 대상으로 초음파 가열 특성을 예측하였으며 제작된 변환기의 집속점 형태 및 가열 특성이 지방층을 충분히 유화시킬 수 있을 것으로 판단하였다. 본 연구의 결과는 보다 효율적이고 안전한 초음파 지방 제거술의 기초 연구로 활용될 것으로 사료된다.

머신러닝 기반 공장 HVAC 시스템의 에너지 효율화 운영 시뮬레이션 (Energy-Efficient Operation Simulation of Factory HVAC System based on Machine Learning)

  • 이석주;다어반권
    • 한국산업정보학회논문지
    • /
    • 제29권2호
    • /
    • pp.47-54
    • /
    • 2024
  • 현재, 전세계적으로 에너지 자원은 점차적으로 감소하고 있음에도 불구하고 에너지 수요 및 소비는 지속적으로 증가하고 있다. 이에 따른 에너지 자원을 대체하기 위한 범국가적인 노력 및 연구가 수행되고 있다. 에너지 수요에 따른 공급의 증가 뿐만 아니라 에너지를 효율적으로 소비하는 것은 현 에너지 부족 현상을 해결하기 위한 적절한 수단이 될 수 있다. 본 연구는 에너지를 가장 많이 소비하는 제조 공장의 에너지를 효율적으로 소비할 수 있는 방법을 시뮬레이션하고 분석하였다. 제조 공장에서 가장 많은 에너지를 소비하는 HVAC (Heating, Ventilating, and Air Conditioning) 시스템의 효율적인 운전을 위해 온도기반의 제어를 통한 공장의 에너지 최적화 시뮬레이션을 수행하였다. 이를 기반으로 실제 공장의 온도와 전력 데이터를 이용하여 머신러닝 알고리즘을 적용하고 공장 온도를 예측하였다. 또한 예측 온도를 이용한 제어 시스템 시뮬레이션으로 공장 에너지의 소비패턴을 분석하고 에너지(전력량) 소비량을 감소할 수 있는 운전 모델을 제안하였다. 공장 에너지 패턴에 있어 HVAC 시스템의 예측 기반 프리 쿨링을 통한 온도제어 알고리즘은 기존 대비 10% 이상의 에너지 절감 효과를 보여 준다. 이 결과는 HVAC 시스템의 최적 제어가 공장 에너지 소비를 절감할 수 있음을 나타낸다. 향후 본 제어 시스템의 알고리즘은 실제 공장의 최적 제어에 적용되어 에너지 소비 절감 운전을 수행할 예정이다.

직선화된 와이어의 버 없는 전단기 개발에 관한 연구 (The Development of Burrless Shearing System for Straightened Wire)

  • 조준원;김웅겸;김헌영;김병희
    • 산업기술연구
    • /
    • 제25권B호
    • /
    • pp.121-126
    • /
    • 2005
  • Micro wires manufactured by the straightening process are used in the BT(Bio-Technology), IT(Information-Technology), NT(Nano-Technology). We have developed a novel wire straightener which uses the direct heating method(DHM) for straightening the micro wire and shearing device for burr-less cutting. In this study, we confirm the tendency of micro wire after the shearing process. It is impossible to remove the burr in the shearing process. However, the embodiment of minimum burr size after the shearing process is the best in-process method. In order to minimize the burr size, we have accomplished the various experiment condition such as the U-groove, the effect of the counter punch, the shear angle, clearance.

  • PDF

인공관절용 초고분자량폴리에틸렌의 가교결합 공정변수와 기계적 특성과의 상관관계 (Relationship between Crosslinking Processes and Mechanical Properties of UHMWPE for Artificial Joint)

  • 김현묵;김성곤;이종대;윤인식
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1570-1574
    • /
    • 2008
  • Various mechanical test were conducted on conventional and crosslinked ultra-high molecular weight polyethylene(UHMWPE) all prepared from the same lot of medical grade GUR 1050 for artificial joint. The conventional materials were not irradiated and treated by heating. The cosslinked materials were irradiated with $25kGy{\sim}200kGy$ by gamma-ray andthen annealed or remelted. Gamma-ray irradiation and heat treatment process were found to significantly impact the crystallinity, and hence the mechanical behavior, of the highly crosslinked UHMWPE. The radiation dose and heating conditions were key predictors of the uniaxial yielding, plastic flow, and failure properties of conventional and highly crosslinked UHMWPE. The correlation model from experiments would be the basic information to enhance the were resistance of artificial joint liner.

  • PDF

온열료법을 이용한 고주파 및 마이크로웨이브 암치료기에 관한 연구 (A Study on the RF and Microwave Hyperthermia System for Cancer Therapy)

  • 유재병;박덕규;양성화;박민용;추성실;이상배
    • 대한전자공학회논문지
    • /
    • 제24권3호
    • /
    • pp.486-492
    • /
    • 1987
  • This study is an attempt to review the theories about the RF and microwave hyperthermia and to get the practical implementation of hyperthermia system on the basic clinical experiments with agar phantoms and four patients. The frequencies of RF power are 8 MHz and 16 MHz, which are effective for the heating of deep-seated and superficial tumors, and microwave is 2.45 GHz, also suitable for the heating of superficial tumors. Even if the long-term effect of clinical applications were not investigated for human living body, it was observee that the RF and microwave hyperthermias are effective for many kinds of cancers in the fixed frequency ranges.

  • PDF