• KIEAE Journal
• /
• 제15권5호
• /
• pp.107-112
• /
• 2015

Purpose: This study desires to investigate an effect of indoor temperature, humidity, and illuminance targeting a planting system of double-skin facade and cavity space adjacent to the outside within a certain period of winter. Through this, the study suggests a basic material about an energy conservation effect of double window system using planting to reduce heating load of a building in winter, so desires to contribute to indoor thermal comfort effect and illuminance correction study of double window and indoor plant. Method: Considering effects such as day and night climatic elements and air conditions in winter, illuminance measurement was conducted through a double-skin facade of space, a subject of the measurement, on the basis of practical residence time of a resident, and this study analyzed characteristics of indoor illuminance about this. The study measured and compared a change of insolation, dry-bulb temperature, and relative humidity at each indoor-outdoor measuring point, so measured and compared characteristics of an indoor temperature effect by elements of double-skin facade and indoor plant. Result: Through this study, the researcher could determine that indoor plant within double window in winter not only blocks solar radiation but also photosynthesizes, so is somewhat disadvantageous to winter thermal comfort reducing heating load. In addition, solar radiation going through interior plays a role to bring down somewhat high humidity to about 50% of reasonable humidity, so plays a direct role of maintenance of comfortable indoor space. Although there are effects such as blocking of solar radiation and temperature reduction, this has a positive influence on humidity control and proper illuminance distribution. The researcher could determine that illuminance, temperature, and humidity by solar radiation penetration for the whole measuring time play a role to supplement indoor environment mutually.

• 한국식품영양학회지
• /
• 제17권1호
• /
• pp.32-40
• /
• 2004

간장으로 채워진 실린더 형태의 장조림 제품의 가열살균 시 온도변화를 유한요소분석법(finite element method)을 이용하여 예측하기 위하여 상업적 NISA (Numerical Integrated Elements for System Analysis, EMRC, USA)프로그램을 이용하여 실시하였다. 장조림 식품에서의 열전달은 냉점이 기하학적 중심에 위치하지 않고 y축으로 26.9 mm 뒤쪽에 위치하였다. 이는 간장소스의 비열이 장조림보다 20% 이상 큰 값이기 때문으로, 사용된 재료의 열전달계수에 의해서 냉점의 위치가 다르게 나타났다. 장조림 식품의 가열살균 시 열전달계수의 영향을 검토하기 위하여 온도와 치사율 오차를 종속변수로 하여 간장소스의 열전도계수, 장조림의 열전도계수, 열전달계수를 독립변수로 한 반응표면분석법을 행한 결과 장조림의 열전도계수가 p<0.01로 매우 높은 상관관계를 보이며, 치사율 오차를 최소로 하는 최적화값을 얻을 수 있었다.

• 국제학술발표논문집
• /
• The 5th International Conference on Construction Engineering and Project Management
• /
• pp.260-266
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance according to the types of atrium of office building. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was understood, and the followings are the considerations for designing an atrium. First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning an atria within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• 분석과학
• /
• 제15권2호
• /
• pp.127-134
• /
• 2002

추출한 유기상 속의 희토류 원소를 유도결합 플라스마 질량분석법(inductively coupled plasma mass spectrometry, ICP-MS)으로 정량하는 방법에 대하여 연구하였다. 희토류 원소를 추출한 유기상의 과다한 도입을 방지하기 위하여 탈용매화장치를 장착한 초음파 분무기를 이용하여 ICP-MS에 주입하였다. 에탄올(EtOH)에 MIBK(methyl isobutyl ketone)를 섞은 용매를 도입하였을때, 계수율(count rate)이 증가하였고, 여기에 0.03 M의 추출제 HEH(2-ethylhexyl-2-ethylhexyl phosphonic acid, P507, PC88A)를 섞었을 때는 감소하였다. 탈용매화장치의 냉각장치(condenser)의 최적온도는 -10 $^{\circ}C$이었고, 가열관(heating tube)의 최적온도는 150 $^{\circ}C$이었다. 계수율이 최대이고, 반사파(reflect power)가 최소인 최적 운반기체의 흐름속도는 0.7 L/min이었다. MIBK에 추출제 HEH가 0.03 M이 섞여있는 추출용매로 추출을 행하였을 때, 최적 pH는 4.3이었고, 추출시간은 10 분이었다. 최적조건에서 0.2 ${\sim}$ 20 ng/mL의 표준용액으로 얻은 검정곡선으로부터 구한 검출 한계는 0.02 ${\sim}$ 0.05 ng/mL 이었다.

• 유기물자원화
• /
• 제17권1호
• /
• pp.27-38
• /
• 2009

본 연구는 유기성폐기물인 음식물폐기물과 하수슬러지를 가연성폐기물을 혼재하여 연료로 사용하기 위해서 제조과정과 연소공정에서 발생되는 특성을 분석하였다. 연료화 재질의 특성은 연도분석기를 이용하여 배연가스 성분을 조사하였고, 발열량은 봄베식 열량계를 이용하여 분석하였다. 연료화 재료의 특성연구를 위하여 기초조사 수분함량(%), 가연성 폐기물 비율, 회분량, 중금속, 각 성분 원소분석, 발열량, 중량 혼재비율에 따라서 분석하였다. $RDF_{k-1}$의 연료는 건조하수슬러지, 음식물폐기물 및 가연성폐기물 혼재비율에 따라 제조하였고, $RDF_{k-2}$는 피트모스, 타르 및 하수슬러지 혼합비율에 의해서 제조하였다. 연소실험은 공기비 2와 연소온도 $850^{\circ}C$의 최적조건 상태에서 실험을 실행하였다. 연소실험장치에서 연소시간 5, 10, 15분의 간격으로 실험하였다. 연소장치로의 주입 연료량은 50g을 주입하여 실행하였다. $RDF_{k-1}$의 연료는 혼재비율에 따라서 발열량 실험결과 6,900에서 8,120 kcal/kg까지 분석되었고, $RDF_{k-2}$는 4,014에서 8,050 kcal/kg까지 나타났다. 연도실험에서 연소의 효율은 RDF의 발열량, 수분, 원소구성성분과 재질의 다양한 혼재비율에 큰 영향을 미치는 것으로 나타났다. 제조된 연료의 $RDF_{k-1}$ 연소실험에서 가연성 성분의 혼재비율이 높은 경우 발열량과 $C_xH_y$ 농도 및 회분량이 증가하였다. $RDF_{k-2}$ 경우는 tar의 혼재비율의 증가함에 따라 발열량은 증가하나 회분량, CO와 $C_xH_y$의 농도발생이 증가하는 것으로 나타났다.

• 한국주조공학회지
• /
• 제5권4호
• /
• pp.243-257
• /
• 1985

Many authors have studied the solidification process of cast iron and the effect of grain boundaries in austenite shell on the growth of spheroidal graphite. But, the studies on the melting morphology of cast iron are rare and the effect of grain boundaries in austenite shell on the melting procedure of spheroidal graphite cast iron is unknown. Therefore, in this work, the melting procedure of cast iron and the role of grain boundaries in austenite shell on the melting of spheroidal graphite have been studied. The main results are summarized as follows. 1. In white cast iron containing silicon, melting initiates at the interface between austenite matrix and temper carbon which was decomposed from $Fe_3C$ during heating. 2. In gray cast iron, melting initiates at the boundary of eutectic cell where elements with low melting temperature are condensed. The dissolution of kish graphite is difficult. 3. In spheroidal graphite cast iron containing little phosphor, melting initiates at the outer region of austenite shell in which silicon is condensed. In this case, grain boundaries in austenite shell give little effect on the melting procedure of spheroidal graphite. 4. In spheroidal graphite cast iron containing phosphor above 0.3 wt%, its melting phenomena are changed with heating rate due to the existence of steadite. In this case, it can be concluded that liquid phase of steadite, which segregated on outer region of austenite shell, moves to spheroidal graphite-austenite interface along the grain boundaries in austenite shell.

• 한국농촌건축학회논문집
• /
• 제14권1호
• /
• pp.1-8
• /
• 2012

This study was to analyze physical condition on the dormitory high school in Jeonju City, and find out users' satisfaction on that. This was going to contribute to the directions of it's physical environmental improvement. This was performed by a questionnaire survey method. Data were collected from 200 students, who had been dwelling 4 high school dormitories in Jeonju City. Through analyzing those data about library, diningroom, laundry room, break room, computer room, restroom, shower room, hall lounge, and snack bar in a dormitory, the results are as follows. First, students thought some physical conditions to be inconvenient in an distracted study atmosphere and hard furniture of library, a bad location of diningroom, a short laundry machine, lack of tables in a break room, a short performance and supply computer, a small space and short toilet in restroom, and a short of hall lounge and snack bar. Second, the students' satisfaction of common public areas in dormitory was 3.39 score. Students were concerned with library and restroom shower room through analyzing satisfied and unsatisfied areas. Third, they needed to improve heating, cooling, and noise in common areas of dormitory, and needed to support a breakroom and snack bar. Conclusively, library, restroom shower room, break room, and snack bar were important common areas, and indoor environmental elements - heating, cooling and noise- were important in high school dormitory.

• Current Optics and Photonics
• /
• 제2권1호
• /
• pp.79-84
• /
• 2018

We present a novel and simple method to enable spatially selective $ZnAl_2O_4$ nanocrystal formation on the surface of $B_2O_3$-$Al_2O_3$-ZnO-CaO-$K_2O$ glass by employing localized laser heating. Optimized precipitation of glass-ceramics containing nanocrystals doped with $Eu^{3+}$ and $Yb^{3+}$ ions was performed by controlling $CO_2$ laser power and scan speed. Micro-x-ray diffraction and transmission electron microscopy revealed the mean size and morphology of nanocrystals, and energy dispersive x-ray spectroscopy showed the lateral distribution of elements in the imaged area. Laser power and scan speed controled annealing temperature for crystalization in the range of 1.4-1.8 W and 0.01-0.3 mm/s, and changed the size of nanocrystals and distribution of dopant ions. We also report more than 20 times enhanced downshift visible emission under ultraviolet excitation, and 3 times increased upconversion emission from $Eu^{3+}$ ions assisted by efficient sensitizer $Yb^{3+}$ ions in nanocrystals under 980 nm excitation. The confocal microscope revealed the depth profile of $Eu^{3+}$ ions by showing their emission intensity variation.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.632-640
• /
• 1996

석탄슬러리 액적은 석유와 취급의 유사성 때문에 석유 대체에너지로서 중용하게 인식되어지고 있으며, 석유계의 연료와 비슥한 방법으로 분무연소 시키는 것이 가능하여 종래의 중유사용 연소장치를 최소한 개조하여 사용할 수 있다는 이점이 있다. 따라서 석탄슬러리 액적의 연소에 관한 연구가 활발히 진행되고 있으나 혼합되는 연료의 종류 또는 연소 및 열전달기수에 대한 해석 방법이 다양하여 아직 체계화되지 못하고 있으며 논란의 여지도 없다.

• 한국주거학회논문집
• /
• 제9권2호
• /
• pp.79-87
• /
• 1998

This study was designed to know the dwellers opinions about their preferred element of for housing in order to enhance the level of environment through better housing plan. The main tasks of investigation were to: (1) determine the preferred elements of design for housing. (2) determine the usage of outdoor space dwellers prefer, (3) ascertain what kinds of management program and public facilities dwellers need. The sample, of 450 dwellers, was selected from the apartments in Kimhae. In complete questionnaires were not used in the analysis of data, thus, the total research sample consisted of 400 dwellers. The questionnare was developed by the researcher for this study. Data were collected during June 1996. Respones from 400 dwellers were processed by SAS package program using frequency counts, percentages and x2 to analyze the data. The major findings were: (1) that size of house, number of bed room, number of bath room, housing type that they want were significantly different according to the characteristic of the dwellers, (2) they preferred in individual heating system to the centralized heating system of the compound, and the preferrence differed significantly in accordance with what system they are using now, (3) they wanted to have more green zone than enlarging childrens' play ground or parking lot, (4) about the management program and public facilities they wanted, there was no significant difference according to the characteristic of the dwellers.