• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.490-497
• /
• 2020

Asphalt pavement accounts for more than 90% of the total pavement in Korea. Pavement is most widely constructed among construction structures. The heat transfer characteristics (Thermophysical Properties) of the asphalt pavement cause the heat island effect in downtown areas. An increasing asphalt surface temperature is one of the major causes of damage to asphalt pavement. This study examined the heat transfer characteristic factors according to solar energy accumulation in an asphalt mixture. The specimens (WC-2 & PA-13, Recycled aggregate used WC-2) used in the experiment were compacted with a Gyratory Compactor. The thermo-physical properties (thermal conductivity, specific heat capacity, thermal diffusivity, and thermal emissivity) and solar energy accumulation were evaluated. The thermal accumulation and HFM tests revealed a 1.2- to 2.0-fold difference. This indicates that the thermal conductivity of the asphalt mixture pavement changes with the accumulation of solar energy. An analysis of the correlation of thermal conductivity according to the surface temperature of the asphalt mixture showed that WC-2 was logarithmic, and PA-13 was linear. Experiments on the heat transfer characteristics of asphalt pavement that can be used for thermal failure modeling of asphalt were conducted.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.1
• /
• pp.21-24
• /
• 2004

To determine lethal temperature of alfalfa (Medicago sativa L. cv Vernal) at heat-stressed conditions, seedlings grown in a small pots for 4 weeks were subjected to different temperature regimes of heat treatment. No apparent demage was observed when the plants were treated at 45, 50 or $60^{\circ}C$ for 1 h. Heat treatments at 60 and $65^{\circ}C$ for 1 h, several plants were withered and showed damage symptom on their leaves. When the plants were exposed to $70^{\circ}C$ for 1 h, most of leaves were severely withered, but it was not lethal conditions for the whole plants. By contrast, most of plants were died within one day after heat treatment at $80^{\circ}C$ for 1h. Furthermore, plants exposed to $80^{\circ}C$ for 50 min were also died within 7 days. It was found that new shoots were regenerated from the plants that had been treated at $80^{\circ}C$ within 45 min. These results indicate that heat treatment at $80^{\circ}C$ for 50 min is an optimum condition to distinguish the lethality of alfalfa plants. Simple viability assay system established in this study will be useful fer selection and characterization of heat-tolerant transgenic alfalfa plants.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1225-1234
• /
• 2023

The intensity of crop water stress caused by moisture deficit is affected by growth and heat conditions. For more accurate detection of crop water stress state using remote sensing techniques, it is necessary to select vegetation indices sensitive to crop response and to understand their changes considering not only soil moisture deficit but also heat conditions. In this study, we measured the MERIS terrestrial chlorophyll index (MTCI) and chlorophyll/carotenoid index (CCI) under drought and heat wave conditions. The MTCI, sensitive to chlorophyll concentration, sensitively decreased on non-irrigation conditions and the degree was larger with heat waves. On the other hand, the CCI, correlated with photosynthesis efficiency, showed less sensitivity to water deficit but had decreased significantly with heat waves. After re-irrigation, the MTCI was increased than before damage and CCI became more sensitive to heat stress. These results are expected to contribute to evaluating the intensity of crop water stress through remote sensing techniques.

• Journal of the Korean Institute of Gas
• /
• v.20 no.5
• /
• pp.9-16
• /
• 2016

Buried pipe system is subject to leak or rupture due to internal and external defects with age. Especially, if the pipeline is designed for pressurized gas, the leak can wreak a devastating on its surrounding area. The current method of setting up underground gas pipeline is based on OGP criteria of applying one tenth of the inner pipe pressure. The criteria is applied irrespective of their burial depth or pipe's properties. At times, even the whole safety measures are totally ignored. Considering the magnitude of possible damage from a gas leakage, a precise analytical tool for the risk assessment is urgently needed. The study was conducted to assess possible scenarios of gas accidents and to develop a computer model to minimize the damage. The data from ETA was analyzed intensively, and the model was developed. The model is capable of predicting jet fire influence area with comprehensive input parameters, such as burial depth. The model was calibrated and verified by the historic accident data from Edison Township, New Jersey, the United States. The statistical model was also developed to compare the results of the model in this study and the existing OGP model. They were in good agreement with respect to damage predictions, such as radiation heat coming from 10 meters away from the heat source of gas flame.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.3
• /
• pp.633-643
• /
• 2017

To examine the pro-apoptotic role of the human ortholog (YPEL5) of the Drosophila Yippee protein, the cell viability of Saccharomyces cerevisiae mutant strain with deleted MOH1, the yeast ortholog, was compared with that of the wild-type (WT)-MOH1 strain after exposure to different apoptogenic stimulants, including UV irradiation, methyl methanesulfonate (MMS), camptothecin (CPT), heat shock, and hyperosmotic shock. The $moh1{\Delta}$ mutant exhibited enhanced cell viability compared with the WT-MOH1 strain when treated with lethal UV irradiation, 1.8 mM MMS, $100{\mu}M$ CPT, heat shock at $50^{\circ}C$, or 1.2 M KCl. At the same time, the level of Moh1 protein was commonly up-regulated in the WT-MOH1 strain as was that of Ynk1 protein, which is known as a marker for DNA damage. Although the enhanced UV resistance of the $moh1{\Delta}$ mutant largely disappeared following transformation with the yeast MOH1 gene or one of the human YPEL1-YPEL5 genes, the transformant bearing pYES2-YPEL5 was more sensitive to lethal UV irradiation and its UV sensitivity was similar to that of the WT-MOH1 strain. Under these conditions, the UV irradiation-induced apoptotic events, such as FITC-Annexin V stainability, mitochondrial membrane potential (${\Delta}{\psi}m$) loss, and metacaspase activation, occurred to a much lesser extent in the $moh1{\Delta}$ mutant compared with the WT-MOH1 strain and the mutant strain bearing pYES2-MOH1 or pYES2-YPEL5. These results demonstrate the functional conservation between yeast Moh1 and human YPEL5, and their involvement in mitochondria-dependent apoptosis induced by DNA damage.

• The Journal of Internal Korean Medicine
• /
• v.29 no.1
• /
• pp.200-218
• /
• 2008

Objectives : The purpose of this study was to investigate the effects of Injinchunggan-tang (Yinchenchinggan-tang) on DMN-induced liver damage by applying proteomics. Materials and Methods : Sprague-Dawley rats were used in this experiment and were divided into the normal group (normal saline), the control group (DMN) and the sample group (DMN+IJCGT). DMN was injected i.p. once a day three times a week for 3 weeks in the control group. Normal saline instead of DMN was administered to the normal group. In the sample group, Injinchunggan-tang (Yinchenchinggan-tang) extract was orally administered once a day for 10 days after DMN was induced. The livers of each group were processed and analyzed by histology, Western blot, $Oxyblot^{TM}$, CBB and 2-dimensional electrophoresis. Results : In the histological findings of the liver, IJCGT reduced collagen deposition and liver damage in DMN-induced hepatic fibrosis. IJCGT increased MMP-13 protein production assessed by western blot. Protein oxidation induced by DMN treatment was decreased by IJCGT. In the 2-dimensional electrophoresis finding, the level of the increased proteins induced by DMN treatment such as GRP 75, 58kDa glucose regulated protein and heat shock 70kDa protein 5 were decreased by IJCGT. IJCGT was considered to have the protective effects on hepatotoxicity induced by DMN. In the 2-dimensional electrophoresis finding, the level of increased oxidized proteins such as heat shock 70 protein, mitochondrial malonyltransferase, calreticulin precursor, actin, NADP-isocitrate dehydrogenase, ankyrin repeat and SOCS box protein 11 were decreased by IJCGT. IJCGT was considered to have protective effect on the protein production induced by DMN treatment. Conclusion : Injinchunggan-tang (Yinchenchinggan-tang) exerts an inhibitory effect against the fibrosis and protein oxidation induced by DMN treatment in the rat liver. IJCGT was considered to have protective effects on the hepatotoxicity and protein production induced by DMN treatment.

• Composites Research
• /
• v.28 no.6
• /
• pp.395-401
• /
• 2015

This study investigated the thermal stability of Grubbs' catalyst and its reactivity with self-healing agents for self-healing damage repair. Four types of Grubbs' catalyst supplied by manufacturers were considered and each catalyst was tested in as-received and grinded conditions. Four types of self-healing agents were prepared by varying the mixing ratio of dicyclopentadiene (DCPD) and 5-ethylidene-2-norbonene (ENB). Heat flows as a function of temperature were measured through a differential scanning calorimetry (DSC) to determine the thermal stability of catalysts. Reaction heats of self-healing agents with the catalyst were measured to evaluate the reactivity of the catalyst. For this evaluation, Fluka Chemika Grubbs' catalyst was used based on the maximum temperature and the time to reach the maximum temperature. According to the results, catalysts had different shapes depending on the manufacturer and the results showed that the smaller the size of the catalyst the higher the reactivity with self-healing agents. As the ENB ratio in self-healing agents increased, the maximum temperature increased, and the time to reach the maximum temperature decreased. As the amount of the catalyst increased, the maximum temperature increased, and the time to reach the maximum temperature decreased. Considering the thermal stability of the catalyst and its reactivity with the self-healing agent, combination of 0.5 wt% catalyst and the D3E1 self-healing agent was optimal for self-healing damage repair. Finally, as the thermal decomposition may occur depending on the environmental temperature, the catalyst must not be exposed to temperature higher than that is necessary to maintain the thermal stability of the catalyst.

• Journal of Korean Medical classics
• /
• v.3
• /
• pp.399-443
• /
• 1989

In this thesis, I intend to study the translational and clinical interpretation through the syndrom of "Pyong-Yeol-Byong", and reached the following conclusions. 1. Eum-Yang-Kyo (陰陽交)' 1) Meaning: "Eum" means "Essential and vital energy" "Yang" means "Evil factor affecting health" and "Kyo" means "cross-struggle." 2) Location of disease: Heat evil enter Hyeol-Bun (血分) 3) Pathogenesis: Heat evil invade Eum-Bun (陰分) and struggles with Health energy, therefore Eum-Chung (陰精) is exhausted and Heat-evil doesn't disapper, it damage Eum and exhaust fluid. Reach fever, rapid pulse raving and unable to take meal, not controled by sweating and sceach death. 4) Particularity of Syndrome: Heat enter Hyol-Bun, and Evil factor is enough and Health energy is insufficient, so that reveal the symptoms of high fever, delirium with coma, unable to take meals. 5) Therapy: It clears Gi-Bun heat evil (氣分熱邪) by Gypsum, Rhizoma Anemarrhenae, Flos Lonicerae, Fructus Forsythiae, Fructus Gardeniae, Radix Scutellanae Rhizoma Coptidis, and cools Blood by Cornu Rhinoceri Asiatici, Radix Rehmanniae, Cortex Moutan Radicis, Dae-Chung-Yob (大靑葉) Radix Arnebiae Seu Lithospermi. 2. Poong Gweol (風厥) 1) Meaning: Poong means wind-evil, Gweol means reversing up. 2) Location of disease: Disease complexes with TaeYang (太陽) in outer part, and with So-Eum (少陰) in inner part. 3) Pathogenesis: Tae-Yang-Gyeong (太陽經) accept wind-evil and So-Eum-Gyeong (少陽經) Kidney Energy reverse up so that fidgetiness not resolves by sweating. 4) Particularity of Syndrome: There are outer symptoms of fever, hydrosis with inner symptoms of fidgetinessis. 5) Therapy: Reduce Jok-Tae-Yang (足太陽) and Supply Jok-So-Eum (足少陰) by accupuncture, so cure Poong Gweol and make balance between Yeong (營) and Wi (衛). 3. Scrofula coused by wind-evil (勞風) 1) Meaning: It means accepting wind evil rest less. 2) Location of Disease: It locates lung 3) Pathogenesis: Because of accepting wind-evil restless, he take scrofula with damaging lung. 4) Particularity of disease: It is lung disease of aversion to wind and shiver, nape-stiffiness, dim eyesight, cough, disphea, vomitting sputum, if one camnot vomit sputum, he died by damage of lung. 5) Therapy: The period of therapy is different by age or strength of health energy, so I think must prevent Eum deficiency and clear fever no reduced in lung. 4. Shin-Poong (腎風) 1) Meaning: It means taking edema by accepting wind-evil, because the kidney controls water. 2) Location of Disease: It is that wind-evil envade kidney. 3) Pathogenesis : Water evil of kidney with wind-heat rises up to face, reach edema, puffines s of the lower eyelid, floating pulse, bombus, yellowish urine, hydrosis and hand-heating, drymouth and excessive thirsty, walkless by heaviness, menstrual disfunction, restless and unable to take meals, unable to lie flat, heavy cough if lie flat, and accepting wind-evil by deficiency of kidney function, so the function of dredging the water passage is not smooth, symptom of water and symptom of wind reveal together. 4) Therapy: Remove wind-heat, promote diuresis to eliminate tile wetness-evil, supplement the dificiency of kidney's Eum. Finally, we can know that later Fever Disease Medicime (溫病學) is affected to the theory of "Pyong Yeol Byong" in 33th Chapter of SoMoon (素問).

• Laser Solutions
• /
• v.1 no.1
• /
• pp.24-29
• /
• 1998

A new wide laser beam optical system for the laser materials processing has been developed with a polygonal mirror. It consists of polygonal mirror and cooling part that prevents the surface of rotating polygonal mirror from damage by heat. The polygonal minors have been designed and made as 24 and 30 facets in pyramid type. This system provides a uniform linear laser heat source with the surface scanning width from 15 to 50mm according to the scanning height To examine the wide laser beam, He-Ne laser is used. Also, Acryl is used to confirm the laser beam pattern by bum-pattern print To analyze the energy distribution of the wide laser ben empirical values and theoretical values are compared and discussed. To improve the efficiency of the wide laser beam optical system, methods are suggested by the optical theories. For larger area processing like turbine blade, drawing blade, cold roller and guide plate, optimal overlapping locations have been calculated and analyzed by geometric and optical theories.

• Fire Science and Engineering
• /
• v.29 no.5
• /
• pp.23-28
• /
• 2015

Recently, structural materials have been developed to have high performance, and SM 520 has been developed and used for high-rise buildings. However, fires frequently occur in buildings, and the number of victims and amount of damage increase year by year. However, the evaluation of fire resistance performance for structural beams made of SM 520 is done with specimens made of ordinary structural steels with boundary conditions of a fixed beam, and the results are allowed for use in steel-framed buildings. This study analyzed the fire resistance performance of statistically indeterminate beams built with SM 520. The analysis used a fire engineering technique that includes mechanical and thermal data of SM 520 and heat transfer theory, and heat stress analysis was also conducted. The results from the analysis were compared with those from a statistically determinate beam made of ordinary structural steels.