• 제목/요약/키워드: heat pretreatment

검색결과 140건 처리시간 0.035초

하수처리장 바이오가스를 이용한 발전시 가스엔진의 고장원인 분석 (Analysis of cause of engine failure during power generation using biogas in sewage treatment plant)

  • 김길정;김래현
    • 에너지공학
    • /
    • 제25권4호
    • /
    • pp.13-29
    • /
    • 2016
  • 본 연구에서는 실제 난지 하수처리장에서 바이오가스를 연료로 사용하여 발전할 때, 가스엔진에서 발생하는 고장 사례에 대한 조사와 분석을 통해 바이오가스 플랜트의 주요 고장원인을 분석하고, 그 대책을 제시하였다. 바이오 가스엔진에 유입되는 바이오 가스 속의 황화수소와 수분 제거설비의 간헐적인 오작동으로 인한 수분이 바이오 가스엔진의 인터쿨러 부식을 초래하였다. 또한 바이오가스 속의 실록산이 이산화규소와 규산염 화합물을 형성하여 피스톤 표면 및 실린더라이너 내벽의 긁힘과 마모 등의 손상을 유발하였다. 연소실과 배기가스 설비에 부착된 물질들은 황화수소와 다른 불순물질이 결합한 것으로 분석되었다. 이러한 원인으로는 바이오 가스 속의 고함량(50ppm이상)의 황화수소가 탈황설비에 장기간 공급되었고, 탈황설비내 활성탄의 파과점 도달에 따른 제거효율 저하 때문에 황화수소가 엔진으로 유입됨으로써 발생한 것으로 사료된다. 또한, 황화수소는 흡착탑의 실록산 제거용 활성탄 기능을 저하시킴으로써 제거되지 않은 실록산 화합물이 엔진으로 유입되어 다양한 형태의 엔진고장을 유발한 것으로 판단된다. 따라서, 황화수소와 실록산, 수분은 바이오 가스엔진 고장의 주요 원인으로 볼 수 있으며, 이 중 황화수소는 고장을 일으키는 다른 물질과 반응하며, 전처리 공정에 중대한 영향을 미치는 물질로 볼 수 있다. 결과적으로, $H_2S$ 제거방법의 최적화가 안정적인 바이오 가스엔진 운영을 위한 필수적인 대책으로 사료된다.

Reproductive Responses of Awassi Ewes Treated with either Naturally Occurring Progesterone or Synthetic Progestagen

  • Husein, Mustafa Q.;Kridli, Rami T.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제15권9호
    • /
    • pp.1257-1262
    • /
    • 2002
  • The objective was to identify the appropriate form of progesterone, which exhibits compact reproductive responses in Awassi ewes during mid to late seasonal anestrous period. Forty-eight Awassi ewes were randomly allocated into four groups to be treated with 60 mg medroxyprogesterone acetate (MAP), 30 mg fluorogestone acetate (FGA), 40 mg FGA, or 600 mg progesterone sponges. After a 12 day period, sponges were removed and ewes were administered i.m. with 600 IU PMSG (d 0, 0 h). Five harnessed Awassi rams were turned-in with the ewes to detect heat. Ewes were checked for breeding marks at 6 h intervals for 5 days. Blood samples were collected from all ewes for analysis of progesterone concentrations. Pretreatment (d -13 and -12) progesterone concentrations were ${\leq}0.2ng/mL$ among all ewes and were indicative of seasonal anestrous period. On d 0, progesterone concentrations were elevated to $1.4{\pm}0.1ng/mL$ in ewes received progesterone sponges only and were higher (p<0.0001) than those (${\leq}0.2ng/mL$) administered MAP or FGA sponges. Progesterone concentrations returned to their basal values of <0.2 ng/mL within 24 h of sponge removal and were similar (p>0.1) among all ewes. Incidence of estrus was similar (p>0.1) among the four groups and occurred in 75% (9/12), 82% (9/11), 67% (8/12) and 58% (7/12) of the ewes receiving MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Estrous responses occurred 14.7, 20 and 13.6 h earlier in progesterone-sponge-treated ewes than those of MAP- (p<0.04), 30 mg FGA- (p<0.01) and 40 mg FGA-treated (p=0.06) ewes, respectively. Induced estrus conception rates were 50% (6/12), 55% (6/11), 50% (6/12) and 42% (5/12), out of which 4/6, 4/6, 3/6 and 3/5 lambed 151 days following d 0, and were similar (p>0.1) among ewes of the four treatment groups. Ewes that returned to estrus 16 to 20 days following d 0 were 5/12, 5/11, 6/12 and 4/12 ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively, and all lambed 169 days later. Overall lambing rates were 75% (9/12), 82% (9/11), 75% (9/12) and 58% (7/12) ewes treated with MAP, 30 mg FGA, 40 mg FGA and progesterone sponges, respectively. Results demonstrate that applications of MAP, 30 mg FGA, 40 mg FGA and progesterone sponges Awassi ewes were equally effective in induction of estrus and tended to favor both types of FGA and MAP in overall lambing rates over progesterone sponges during the seasonal anestrous period.

Adhesion of Model Molecules to Metallic Surfaces, the Implications for Corrosion Protection

  • de Wit, J.H.W.;van den Brand, J.;de Wit, F.M.;Mol, J.M.C.
    • Corrosion Science and Technology
    • /
    • 제7권1호
    • /
    • pp.50-60
    • /
    • 2008
  • The majority of the described experimental results deal with relatively pure aluminium. Variations were made in the pretreatment of the aluminum substrates and an investigation was performed on the resulting changes in oxide layer composition and chemistry. Subsequently, the bonding behavior of the surfaces was investigated by using model adhesion molecules. These molecules were chosen to represent the bonding functionality of an organic polymer. They were applied onto the pretreated surfaces as a monolayer and the bonding behavior was studied using infrared reflection absorption spectroscopy. A direct and clear relation was found between the hydroxyl fraction on the oxide surfaces and the amount of molecules that subsequently bonded to the surface. Moreover, it was found that most bonds between the oxide surface and organic functional groups are not stable in the presence of water. The best performance was obtained using molecules, which are capable of chemisorption with the oxide surface. Finally, it was found that freshly prepared relatively pure aluminum substrates, which are left in air, rapidly lose their bonding capacity towards organic functional groups. This can be attributed to the adsorption of contamination and water to the oxide surface. In addition the adhesion of a typical epoxy-coated aluminum system was investigated during exposure to water at different temperatures. The coating was found to quite rapidly lose its adhesion upon exposure to water. This rapid loss of adhesion corresponds well with the data where it was demonstrated that the studied epoxy coating only bonds through physisorptive hydrogen bonding, these bonds not being stable in the presence of water. After the initial loss the adhesion of the coating was however found to recover again and even exceeded the adhesion prior to exposure. The improvement could be ascribed to the growth of a thin oxyhydroxide layer on the aluminum substrate, which forms a new, water-stable and stronger bond with the epoxy coating. Two routes for improvement of adhesion are finally decribed including an interphasial polymeric thin layer and a treatment in boiling water of the substrate before coating takes place. The adhesion properties were finely also studied as a function of the Mg content of the alloys. It was shown that an enrichment of Mg in the oxide could take place when Mg containing alloys are heat-treated. It is expected that for these alloys the (hydr)oxide fraction also depends on the pre-treatment and on the distribution of magnesium as compared to the aluminium hydroxides, with a direct impact on adhesive properties.

열분해유 유래 피치로부터 이방성 미세구조 코크스 제조 및 특성 평가 (Preparation and Characterization of Pitch based Coke with Anisotropic Microstructure Derived from Pyrolysis Fuel Oil)

  • 조종훈;김지홍;이영석;임지선;강석창
    • 공업화학
    • /
    • 제32권6호
    • /
    • pp.640-646
    • /
    • 2021
  • 본 연구에서는 열분해유 유래 피치 합성 및 합성 피치로부터 이방성 미세구조를 갖는 코크스를 제조하고 그 특성을 평가하였다. 열분해유는 주로 방향족 고리가 2~3개로 구성된 분자로 이루어져 있어, 400 ℃ 이상의 온도에서 흡열반응인 축합중합으로 피치가 제조되었다. 코크스 반응기는 피치를 유동화 시키는 전처리 반응기, 코킹화 열에너지를 가해주는 preheater 및 코크스의 미세구조를 유도하는 코크스 드럼으로 구성되었으며, preheater의 온도를 400~490 ℃로 조절하여 제조된 피치로부터 코크스를 제조하고 편광현미경, XRD 및 Raman spectroscopy로 특성을 평가하였다. Preheater의 온도가 460 ℃에서 제조된 코크스는 이방성 미세조직이 flow 형태로 나타났으며, 높은 결정성으로 전기전도성이 72.0 S/cm이였다. 그리고 전도성 탄소 재료인 Super-P보다 대략 2.2배 높은 전기전도성을 나타냈다.

환원법에 의한 직접 메탄올 연료전지(DMFC)용 Pt-Bi/Carbon 전극제조 (Synthesis of Pt-Bi/Carbon Electrodes by Reduction Method for Direct Methanol Fuel Cell)

  • 김관성;김민경;노동균;탁용석;백성현
    • 공업화학
    • /
    • 제22권5호
    • /
    • pp.479-485
    • /
    • 2011
  • 다양한 비율의 Pt와 Bi를 carbon black (Vulcan XC-72R)에 담지시킨 Pt-Bi/C 촉매를 환원법을 이용하여 합성하였다. Pt와 Bi의 전구체로는 염화백금산($H_2PtCl_6{\cdot}xH_2O$)과 비스무스트리질산($Bi(NO_3)_3{\cdot}5H_2O$) 수용액을 각각 사용하였으며, 금속을 carbon에 담지하기 전, 금속물질의 분산도를 높여주기 위해 열처리와 산처리를 수행한 carbon black을 사용하였다. XRD (X-ray Diffraction) 분석과 XPS (X-ray Photoelectron Spectroscopy) 분석을 통하여 Pt-Bi/C 촉매 내에 Pt와 Bi가 소성시키기 전에는 BiPt 혹은 $Bi_2Pt$로 존재하지만 $500^{\circ}C}$에서 소성을 한 후에는 Pt 격자구조 안으로 Bi가 침투하여 alloy을 형성하는 것을 확인하였다. 합성한 전극의 메탄올 산화반응은 전기화학분석장치(Potentiostat; Princeton applied research, VSP)를 사용하여 0.5 M $CH_3OH$와 0.5 M $H_2SO_4$의 혼합수용액에서 순환전압법(cyclic voltammetry, CV)을 이용해 측정하였다. 메탄올 산화에 대한 전기화학적 촉매 활성을 평가한 결과 적절한 양의 Bi를 첨가한 경우, 메탄올 산화반응에 대한 높은 촉매활성을 나타냄을 확인하였다. 메탄올 산화에 대한 활성은 전극과 전해질 사이의 안정성과 밀접한 관련이 있다. 정전압법(Chronoamperometry, CA)을 이용하여 전극의 안정성을 평가한 결과 메탄올 산화반응에 높은 활성을 나타내는 촉매일수록 전극의 안정성도 높은 것을 확인하였다.

HS-GC/MS를 이용한 퇴적물 중 휘발성유기화합물 분석 - 외부 및 내부표준방법에서 매질영향 확인 - (Analysis of Volatile Organic Compounds in Sediments Using HS-GC/MS - Confirmation of Matrix Effects in External and Internal Standard Methods -)

  • 신명철;정다솜;노혜란;유순주;서용찬;이보미
    • 한국물환경학회지
    • /
    • 제37권6호
    • /
    • pp.510-519
    • /
    • 2021
  • Volatile Organic Compounds (VOCs) in sediments, which can cause human health problems, have been monitored in Korea since 2014. Measured VOC concentrations can be affected by matrix type and the volatility of target substances. In this study, (1) VOCs volatility and the influence of matrix interference were confirmed, and (2) internal standards (IS) method was applied to improve analytical method. For these purposes, method detection limit (MDL), calibration linearity, precision and accuracy of VOCs were compared in various matrices using the IS. Some of VOCs in sediments showed different peak areas and reduced rates compared to water matrix. It was suggested that adsorption properties of sediments hindered the migration to vapor during heat pretreatment in headspace method. A calibration curve was created in clean sand. Recovery rates for the calibration curve method and IS applying method were 64.1~83.1% and 99.1~119.3%, respectively. Relative standard deviations ranged from 11.1% to 21.6% for the calibration curve method and those for IS ranged 4.7% to 13.7%. In case of real sediment, calibration curve and 1,2-Dichlorobenzene-d4 (ODCB) among IS were not suitable. The average recovery rate of Fluorobenzene (FBZ) increased by 56.4% and Relative Standard Deviation (RSD) by 4.7%. However, the recovery rate was increased in the samples with large values of igniting intensity. This study confirmed that influence of the matrix of VOCs in sediment, and addition of IS materials improved precision and accuracy. Although IS corrects volatilization and adsorption, it is recommended that more than two types of IS should be added rather than single.

개질 폴리에틸렌 코팅 강관의 부착 및 체결부 성능 평가 연구 (Experimental Study on the Adhesion and Performance Evaluation of Joints for Modified Polyethylene Coated Steel Pipes)

  • 이명규;조상환;김민욱
    • Composites Research
    • /
    • 제37권3호
    • /
    • pp.238-245
    • /
    • 2024
  • 본 연구에서는 강관의 효율적 유지관리를 위한 모니터링 시스템 개발 연구의 일환으로 개질 폴리에틸렌 코팅 처리된 강관의 성능 평가를 위한 실험적 연구를 수행하였다. 기존 방식인 기계적 전처리 코팅의 경우 확관시 폴리에틸렌 부착이 저하되는 현상이 발생하여 이를 해결하고자 칼슘 혼입 인산 아연 피막을 활용한 화학적 전처리 공정이 적용되었다. SEM 및 EDX 분석결과, Zn/Ca 비 1.0에서 가장 치밀한 구조가 확인되었다. 또한, 확관 시의 코팅 이탈 방지를 위한 그라프트 처리 무수말레산을 기반으로 엘라스토머, 금속산화물, 블로킹방지제, 슬립제를 각기 다른 조합으로 혼입하여 개질된 폴리에틸렌 코팅 강관에 대한 부착 및 연신율 평가를 실시하였다. 그 결과, 모든 개질 재료를 혼입한 시험체(S4)에서 금속산화물만 혼입한 시험체(S2)대비 25% 이상 향상된 성능을 확인하였다. 마지막으로, 공정이 완료된 코팅 파이프에 대하여 표면부 코팅 손상 방지를 위한 파이프 고정 부속 일부인 쐐기형 소켓링과 이탈 방지 압륜을 개발하고 성능평가를 수행하였다.

여뀌섭취가 반추수에 비치는 임상병리학적 영향 (Clinicopathological Effects of Waterpepper (Persicaria hydropiper) on Ruminants)

  • 조명래;한홍율
    • 한국임상수의학회지
    • /
    • 제6권2호
    • /
    • pp.227-259
    • /
    • 1989
  • Waterpepper is a weed which grows on damp soil. especially near swamps, and in shallow water of ponds and ditches. It Is widespread throughout the country In abundant colonies. In the present experiments, possible toxic effects of waterpepper were investigated in ruminants. Pour cows were fed waterpepper ad libitum or by force in the from of green forage, hay and/or powder, 8 goats were administered in the form of methanol extract, and 4 goats, crude juice, into the lumen. Clinical signs were examined as well as urinalysis, hematology, serum chemical analysis, pH/blood gas analysis and chclinesterase activities following administration of waterpepper. Six goats which were administered the methanol extract or crude juice were sacrificed for pathological examinations., In addition to the clini copathological examinations, the chemical constituents of waterpepper were qualitively analyzed from the methanol extract and the Effects of the waterpepper crude juice were examined on the motility of rabbit duodenum and uterus. It is revealed that waterpepper contains steroids, terpenoids, flavonoids, tannin and essential oils in the methanol extract and nitrates in the crude juice. The crude juice of waterpepper relaxed the rabbit uterine and duodenal smooth muscles. The constraction of duodenum by acetylcholine or BaCl$_2$ were partially inhibited by pretreatment of the crude juice. However, the relaxation of duodenum by the crude juice was not blocked by the pretreatments of phenoxybenzamlne, propranolol, cocaine, reserpine and tetrodotoxin. The constituents of waterpepper to evoke elaxation of duodenal smooth muscle were stable to heat. The cows administered waterpepper showed common clinical symptoms such as acrid expression, restlessness, dullness, inappetence, anorexia, severe diarrhea, mild bloat and left displacement of abomasum, while bloody feces was shown in a cow. The goats administered the mothanol extract showed common clinical signs such as acrid expression, restlessness, dullness, inappetence and soft feces, while bloody feces was shown in a goat, A goat adminstered the crude juice showde bloody feces and diarrhea. Respiratory rates and heart beats were increased along with diarrhea in the experimental cows. The erythrocyte counts and MCHC were decreased whereas PCV, MCV and neutrophils were increased in the cows administered waterpepper. In goats administered methanol extract, there were decreases in erythrocytes, PCV and hemoglobin content, and an increase in MCHC. The goats ingester with the crude juice showed negligible changes in hematologic values compared with control group which was administered the same amount of water instead of the crude juice. The contents of serum calcium, Inorganic phosphorus, magnesium, Iron, glucose, cholesterol, total protein, triglycerides and phospholipids were tended to decrease in cows. In goats serum iron, glucose, triglycerides, cholesterol, BUN and phospholipids content were decreased while the content of sodium and chloride were increased after administration of the methamol extract The goats ingested with the crude juice did not show significant changes in serum chemical analysis. Even though there were some pathological findings such as hyperemia in the small intestines and kidneys and swelling of liver parenchymal cells, the values of serum AST, ALT, LDH, alkaline phosphatase, total bilirubin and creatinine did not change significantly. While proteins, hemoglobin and blood were detected in the urine of cows, urine pH, ketone bodies, glucose, bilirubin and urobilinogen content were normal or undetected. There were no significant changes in pH/bolld gas analysis data of cows and cholinesterase activities of plasma and erythrocytes of cows and goats ingested with waterpepper or the methanol extract. It is concluded that waterpepper irritates the gatrointestinal system, causes abdominal pain, relaxes the gastrointestinal smooth muscle and dilatates blood vessels supplied to the system. The irritation and relaxation may lead to abnormal fermentation, maldigestion and malabsorption of nutrients and result in diarrhea, body feces, mild bloat and left displacement of abomasum.

  • PDF

부추의 건조 온도 조건별 클로로필, Superoxide Dismutase 유사활성의 변화 (Changes of Chlorophyll and SOD-like Activities of Chinese Chives Dehydrated at Different Heat Treatments)

  • 곽연주;김정상
    • 한국식품영양과학회지
    • /
    • 제38권7호
    • /
    • pp.879-884
    • /
    • 2009
  • 부추 건조 분말을 제조하기 위한 최적 열풍건조온도 조건을 확립하고 건조온도 조건에 따른 부추 건조 분말의 생리활성을 가진 클로로필과 SOD 유사활성의 변화정도를 살펴본 결과는 다음과 같다. 건조온도는 부추의 수분함량의 변화에 큰 영향을 미쳤으며 건조온도가 증가함에 따라 건조시간은 현저하게 단축되었다. 부추의 전처리에서 건조시간은 건조 온도가 $70^{\circ}C$ 또는 $80^{\circ}C$에서는 건조 완결시간이 200분 이상소요되었으나 $100^{\circ}C$에서는 120분 이내에 건조가 거의 완료되었다. $100^{\circ}C$에서 30분간 건조하고 그 이후는 $70^{\circ}C$에서 건조하는 조건에서는 약 160분, $100^{\circ}C$에서 60분간 건조하고 그 이후는 $70^{\circ}C$에서 건조하는 조건에서는 건조완료 시간이 120분으로 건조조건의 변화로 건조시간을 단축시킬 수 있었다. 또한 건조온도는 부추의 색도의 결과에도 큰 영향을 미쳤으며 L값은 대조구인 동결 건조한 시료가 49.56, $100^{\circ}C$에서 30분간 건조한 다음 $70^{\circ}C$에서 건조를 완료하는 조건의 시료가 49.19, $100^{\circ}C$에서 60분에서 건조한 다음 $70^{\circ}C$에서 건조한 것으로 각각 48.55로 높았으며, 녹색도(a)는 대조구인 동결 건조한 시료가 -13.24, $100^{\circ}C$에서 30분간 건조한 다음 $70^{\circ}C$에서 건조를 완료하는 조건의 시료가 -9.15, $100^{\circ}C$에서 60분에서 건조한 다음 $70^{\circ}C$에서 건조를 완료하는 조건의 시료는 -8.86로 가장 높았으며, 황색도(b)값 역시 대조군인 동결 건조한 시료는 22.01, $100^{\circ}C$에서 30분에서 건조한 다음 $70^{\circ}C$에서 건조를 완료하는 시료는 15.71, $100^{\circ}C$에서 60분에서 건조한 다음 $70^{\circ}C$에서 건조한 시료는 15.31로 가장 높게 나타내어 부추의 건조에 적정 조건이라 생각되었다. 또한 건조 조건별 클로로필 함량 역시 $100^{\circ}C$에서 30분에서 건조한 다음 $70^{\circ}C$에서 건조를 완료하는 시료가 177 mg%로 가장 낮은 온도인 $70^{\circ}C$에서 건조시킨 부추 시료 179 mg%와 유사한 값을 나타내어 여러 건조 조건 중에서 가장 엽록소 함량이 높았다. SOD 유사활성 역시 대조구인 동결건조 부추에서 1,250(unit/g)으로 가장 높았으며 다음은 $100^{\circ}C$ 60분$-70^{\circ}C$ 건조완료한 부추가 1,176, $100^{\circ}C$ 30분$-70^{\circ}C$ 건조완료한 부추가 1,141로 고온이나 비교적 장시간 열풍에 노출되는 조건에 비해서 높은 값을 나타내었다. 이렇듯 $100^{\circ}C$에서 제한된 시간 동안 건조하고 $70^{\circ}C$에서 건조를 완료하는 것이 부추의 색도와 생리활성 물질을 최대로 유지하면서 건조시간을 단축시킬 수 있는 조건임을 확인하였으며 열풍건조 이후에도 색도와 생리활성 물질인 클로로필과 SOD 유사활성 물질의 효과가 상당량 존재하여 부추 건조 분말의 저장성 및 생리활성 효과를 기대할 수 있을 것으로 판단된다.

천마총 출토 철부(鐵釜)의 제작기법 및 보존처리 (Study on the Manufacturing techniques & Conservation of Iron Pot from Cheonmachong Ancient Tomb)

  • 이승렬;신용비;정원섭
    • 보존과학회지
    • /
    • 제30권3호
    • /
    • pp.263-275
    • /
    • 2014
  • 천마총(황남동 제 155호 고분)에서 출토된 철부(鐵釜)의 제작기법 및 보존처리에 대하여 연구하고자 하였다. 철부의 제작기법을 조사하기 위하여 유물 중 일부를 채취하여 마운팅 후 연마하고, etching을 실시하여 금속조직을 관찰하였고, 비금속개재물부분은 SEM-EDS로 분석을 실시하였다. 금속학적 조직검사와 SEM-EDS분석 결과 철 솥은 백주철 조직이 관찰되었고, 주조 후 상온에서 서서히 건조시킨 것으로 보이며, 취성을 개선하기 위해 별다른 열처리를 시도한 흔적은 보이지 않는다. 몸통 중심부의 폭3cm 두께 1.5cm 전이 확인됨에 따라서 가로식 거푸집을 활용한 이분제작기법을 사용하여 주조한 것으로 추정된다. 이처럼 백주철 조직과 가로식 거푸집을 활용한 제작기법은 비슷한 시기인 식리총과 황남대총에서 출토 된 철 솥에서도 나타나는 것으로, 당시 주조품의 생산기술이 동일하였음을 알 수 있었다. 보존처리는 크게 처리전조사, 이물질제거, 탈염처리, 강화처리, 접합 복원, 색맞춤의 순서로 진행하였으며, 처리과정 중 필요에 따라 세척 및 건조를 실시하였다. 강화처리는 유물의 크기로 인하여 진공함침에 어려움이 있었으므로, 저농도의 Paraloid NAD-10을 2-3차례 붓으로 도포하였고, 보존처리가 완료된 후 15wt.% Paraloid NAD-10용액으로 표면을 재강화하였다. 파손부위의 복원은 섬유강화플라스틱 수지(POLYCOAT FH-245,몰드 적층용)를 사용하여 파손 부위와 유사한 형태의 모형을 만든 후 접합하여 복원하였다. 이번 연구를 통하여 철제유물의 보존처리뿐만 아니라 5-6세기 주조 철솥의 제작기법에 대한 자료를 축적함으로 향후 보다 나은 연구를 위한 발판으로 활용되었으면 한다.