Fully sealed field emission display in size of 4.5 inch has been fabricated using single-wall carbon nanotubes-organic vehicle com-posite. The fabricated display were fully scalable at low temperature below 415$^{\circ}C$ and CNTs were vertically aligned using paste squeeze and surface rubbing techniques. The turn-on fields of 1V/${\mu}{\textrm}{m}$ and field emis-sion current of 1.5mA at 3V/${\mu}{\textrm}{m}$ (J=90${\mu}{\textrm}{m}$/$\textrm{cm}^2$)were observed. Brightness of 1800cd/$m^2$ at 3.7V/${\mu}{\textrm}{m}$ was observed on the entire area of 4.5-inch panel from the green phosphor-ITO glass. The fluctuation of the current was found to be about 7% over a 4.5-inch cath-ode area. This reliable result enables us to produce large area full-color flat panel dis-play in the near future. Carbon nanotubes (CNTs) have attracted much attention because of their unique elec-trical properties and their potential applica-tions [1, 2]. Large aspect ratio of CNTs together with high chemical stability. ther-mal conductivity, and high mechanical strength are advantageous for applications to the field emitter [3]. Several results have been reported on the field emissions from multi-walled nanotubes (MWNTs) and single-walled nanotubes (SWNTs) grown from arc discharge [4, 5]. De Heer et al. have reported the field emission from nan-otubes aligned by the suspension-filtering method. This approach is too difficult to be fully adopted in integration process. Recently, there have been efforts to make applications to field emission devices using nanotubes. Saito et al. demonstrated a car-bon nanotube-based lamp, which was oper-ated at high voltage (10KV) [8]. Aproto-type diode structure was tested by the size of 100mm $\times$ 10mm in vacuum chamber [9]. the difficulties arise from the arrangement of vertically aligned nanotubes after the growth. Recently vertically aligned carbon nanotubes have been synthesized using plasma-enhanced chemical vapor deposition(CVD) [6, 7]. Yet, control of a large area synthesis is still not easily accessible with such approaches. Here we report integra-tion processes of fully sealed 4.5-inch CNT-field emission displays (FEDs). Low turn-on voltage with high brightness, and stabili-ty clearly demonstrate the potential applica-bility of carbon nanotubes to full color dis-plays in near future. For flat panel display in a large area, car-bon nanotubes-based field emitters were fabricated by using nanotubes-organic vehi-cles. The purified SWNTs, which were syn-thesized by dc arc discharge, were dispersed in iso propyl alcohol, and then mixed with on organic binder. The paste of well-dis-persed carbon nanotubes was squeezed onto the metal-patterned sodalime glass throuhg the metal mesh of 20${\mu}{\textrm}{m}$ in size and subse-quently heat-treated in order to remove the organic binder. The insulating spacers in thickness of 200${\mu}{\textrm}{m}$ are inserted between the lower and upper glasses. The Y\ulcornerO\ulcornerS:Eu, ZnS:Cu, Al, and ZnS:Ag, Cl, phosphors are electrically deposited on the upper glass for red, green, and blue colors, respectively. The typical sizes of each phosphor are 2~3 micron. The assembled structure was sealed in an atmosphere of highly purified Ar gas by means of a glass frit. The display plate was evacuated down to the pressure level of 1$\times$10\ulcorner Torr. Three non-evaporable getters of Ti-Zr-V-Fe were activated during the final heat-exhausting procedure. Finally, the active area of 4.5-inch panel with fully sealed carbon nanotubes was pro-duced. Emission currents were character-ized by the DC-mode and pulse-modulating mode at the voltage up to 800 volts. The brightness of field emission was measured by the Luminance calorimeter (BM-7, Topcon).
본 연구는 체외생산된 배반포기배의 vitrification 을 위한 용기로서 glass micropipette(GMP)을 이용할 수 있는지, GMP 와 OPS 로 동결융해 후 생존율의 비교 및 GMP vitrification 후 hatching 율의 향상을 위하여 실시하였다. GMP vessel은 열전도율과 수정란을 포함하는 적은 질량 때문에 OPS 보다 동결 및 융해속도를 높일 수 있다. 3개의 체외수정란을 vitrification 용액에 노출시키고 OPS 또는 GMP vessel에 loading 시킨 후 액체질소에 침적하는데까지 20~25초 이내에 실시하였다. 동결ㆍ융해한 배반포기배는 0.25와 15 M sucrose solution 및 TCM 1999에 각각 5분씩 차례로 희석한 후 10% FCS가 첨가된 TCM 199에 24시간동안 배양하였다. OPS(75.9%)와 GMP(80.0%) 방법간의 re-expanding 율은 유의적 (P<0.05)인 차이가 없었다. OPS(34.1%)와 GMP(37.5%) 방법에서 hatching 율은 intact group(54.3%) 보다도 유의적 (P<0.05)으로 낮았다. 비록 GMP straw 당 3개 이하의 blastocysts 를 loading 하였더라도 narrow portion(83.3%) 보다도 wide portion(S6.7%)에서 vitrified 되었다면 re-expanding 율이 유의적 (P<0.05)으로 낮았다. 비록 30초 처리군과 무처리군 간에는 유의적인 차이가 없었지만 0.05% pronase 용액에 30, 60 및 90초간 처리군 (45.9, 54.7 및 57.5%)의 hatching 율은 무처리구 (35.0%) 보다 유의적 (P<0.05)으로 높았다. 이러한 결과들은 OPS와 GMP vitrification vessel은 체외생산된 배반포기배의 높은 생존율을 얻을 수 있다. 그러나 GMP vessel은 L$N_2$침적 후 vessel의 floating을 방지하기 위한 또 다른 cap 이 필요하지 않다는 유리한 점을 가지고 있다. 수정란의 loading 위치, 즉 narrow 또는 wide portion에 따라 소 체외 생산된 배반포기배의 생존력에 제한적인 요인으로 고려된다. 0.5% pronase 용액에 60 또는 90초간의 노출은 융해후 hatching 율을 향상시킬 수 있었다.
환경스트레스는 식물의 생산성에 영향을 미치는 주된 제한요인이다. 여러 종류의 환경스트레스에 대해 내성을 지닌 형질전환 감자식물체 개발에 활용하기 위하여 두 품종의 감자(대서, 수미)의 leaf disc를 사용하여 고온을 포함하여 여러 가지 환경 스트레스에 대한 감수성을 조사하였다. 37$^{\circ}C$에서 84시간 고온처리에 대해서는 고온에 감수성 품종인 대서가 수미에 비해 약 20%피해를 더 많이 받아 감수성이 높은 것으로 나타났다. 감자 식물체의 leaf disc는 2$\mu$M methyl viologen(MV)을 처리하였을 때 대서가 수미에 비해 약 38%더 많은 피해를 받았으며 10$\mu$M MV에서는 감수성은 더 높았다. 0.75M NaCl에 대해서는 대서 품종이 수미에 비해 약 45%의 낮은 엽록소 함량을 나타내어 감수성이 높은 것으로 나타났으나, 고농도에서는 큰 차이가 없었다. $H_2O$$_2$에 대한 두 품종의 감수성은 복합적이었으며, 25mM $H_2O$$_2$에서는 수미가 대서에 비해 높은 감수성을 나타내었으나 100mM $H_2O$$_2$에서는 대서가 릎은 감수성을 나타내었다. 본 연구에 사용한 leaf disc는 식물체의 활성을 잘 반영할 뿐 아니라 간편하기 때문에 복합스트레스 내성 형질전환 감자식물체의 선발 및 특성규명에 유용하게 이용될 것으로 기대된다.
고분자전해질 연료전지의 성능은 cell 온도, 전체 압력, 반응 기체의 부분 압력 상대습도와 같은 다양한 요인들에 의해 영향을 받는다. 이온화된 수소 이온은 $H_3O^+$의 형태로 membrane을 통과하여 물을 생성하는 반응으로 전기를 발생시킨다. 대용량 연료전지에서는 부수적으로 생성되는 열을 제거하거나 다른 용도로 사용할 목적으로 냉각시스템이 필요하다. 냉각수의 전도도가 상승할 경우에 연료전지에서 발생된 전류의 일부가 냉각수를 통하여 누설되어 연료전지의 성능을 감소시킬 수 있다. 본 연구에서는 3차 증류수와 ethylene glycol이 함유되어 있는 부동액을 사용하여 저항 수치 변화를 관찰하는 실험을 수행하였다. 3차 증류수의 경우 저항값이 설정치 이하로 내려가는데 약 28일이 소요되었고, 연료전지의 운전에 의한 영향은 관찰되지 않았다. 부동액을 냉각수로 사용한 경우는 43일이 지나도 저항값이 설정치 이하로 내려가지는 않았지만, stack 분리판의 접착부에 이상이 생긴 것으로 추정되는 연료전지의 성능 저하가 발생하여 전도도 실험을 중단하였다. 고분자전해질 연료전지에서는 수소이온의 이온전도성 저하를 방지하기 위하여 외부에서 가습하여 주는 방식이 일반적이지만, 소용량 연료전지에서는 무가습 조건을 적용하여 연료전지의 효율을 높이고 제작단가도 경감할 수 있다. 이를 위하여 저가습 및 무가습 실험을 수행하였으나 대용량 연료전지에서는 양측 무가습인 경우에 $50{\sim}60^{\circ}C$ 이상의 고온에서 성능이 발현되기 어려운 것으로 관찰되었다. 냉각수의 유량을 다르게 하여 실험을 수행한 경우에는 0.78L/min과 같은 낮은 유량에서 출구온도와 입구온도를 측정하여 본 결과 두 온도 사이에 ${\Delta}T$가 다른 유량에서보다 크게 발생하여 성능이 감소된 것으로 사료된다. 이와 같이 냉각수의 온도와 유량을 다르게 하여 양측 무가습 실험을 수행한 결과, 연료전지의 성능이 cell 온도에 직접적인 연관이 있는 것으로 관찰되었다.
본 연구는 국내 산업원료 광물인 납석의 지속적이고 체계적인 개발과 안정적인 수급 관리를 위할 목적으로 국내 납석 광산 현황을 살펴보고 산업용 원료로써 그 활용 방안을 모색하기 위함이다. 국내 납석 광산은 대부분 중생대 화산암류가 열수변질을 받아 형성된 광상으로써, 납석의 주 구성 광물인 엽납석의 물리적 특성은 비중 2.65~2.90, 굳기 1~2, 밀도 1.60~1.80, 내화도 29 이상이며, 색은 보통 백색, 회색, 회백색, 회녹색, 황색, 황녹색을 띠는 것으로 나타났다. 국내 납석의 화학성분 중 SiO2와 Al2O3는 엽납석의 경우 58.2~67.2%와 23.1~28.8%, 엽납석 + 딕카이트의 경우 49.2~72.6%와 16.5~31.0%, 엽납석 + 일라이트의 경우 45.1%와 23.3%, 일라이트의 경우 43.1~82.3%와 11.4~35.8%, 딕카이트의 경우 37.6~69.0%와 19.6~35.3%인 것으로 분석되었다. 국내 납석 광산의 분포는 한반도 남서부와 남동부 지역에 집중해서 분포하며, 그 외에 한반도 동북부 지역에도 일부 분포하는 것으로 조사되었다. 국내 납석 생산 광산은 21개이며, 매장량은 전남(45.6%) > 충북(30.8%) > 경남(13.0%) > 강원(4.8%), 경북(4.8%) 순으로 전남이 가장 많은 것으로 나타났다. 국내 납석 생산량 상의 10개 광산은 중앙자원광산(37.9%) > 완도광산(25.6%) > 나주세라믹광산(13.4%) > 청석-사지원광산(5.4%) > 경주광산(5.0%) > 백암광산(5.0%) > 민경-노화도광산(3.3%) > 부곡광산(2.3%) > 진해납석광산(2.2%) > 보해광산 순인 것으로 분석되었다. 납석은 열전전도, 열팽창성, 열변형, 팽창계수, 부피밀도가 낮고, 내열성과 부식 저항성이 높으며, 살균 및 살충 효능이 우수한 성질이 있으므로 내화 재료, 도자기 재료, 시멘트 첨가제, 살균및 살충 제조재, 충전재 등 다양한 분야에 활용되는 것으로 나타났다. 또한 납석은 수처리 세라믹 분리막 소재, 디젤엔지 배기가스 저감장치 세라믹 필터 소재, 그리고 유리섬유 및 LCD 패널 소재 등 활용범위가 첨단산업분야로까지 확대되는 것으로 분석되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.