• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.11
• /
• pp.444-449
• /
• 2016

The main objective of this work is to experimentally investigate the effect of angle variation and intrusion depth of channels on the distribution of two-phase flow at header-channel junctions. The dimensions of the header and the channels in cross-section were fixed at $16mm{\times}16mm$ and $12mm{\times}1.8mm$, respectively. Air and water were used as the test fluids. Two different header-channel positions were tested : a vertical header with horizontal channels (case VM-HC) and a horizontal header with horizontal channels (case HM-HC). In all cases, the intrusion depths of the channels are 0 mm, 2 mm, and 4 mm. For the case of the intrusion depth of VM-HC, the flow distribution became more uniform. However, the intrusion depth negatively affected the flow distribution for the case of HM-HC because liquid separation delay occurred.

• Journal of the Korean housing association
• /
• v.19 no.5
• /
• pp.111-120
• /
• 2008

The aim of this study is to present the design methods about manifold location being installed and size and to draw out the proper piping size as comparing the fluctuation of discharge with manifold size and residence size through the piping network analysis, when using the same faucet in accordance. The findings are summarized as follows, 1) an appropriate header main body pipe diameter was deemed to be $32{\sim}50\;mm$. 2) the research presented design measures for the application of appropriate water supply inlet pipe diameters according to residential buildings with various sizes. 3) the header direct branch piping method is ideal for small and medium-sized residential complexes, and the header branching and semi header methods are deemed to be more favorable for large residential complexes. 4) this study offered design measures for appropriate header system main body pipe diameters, water supply inlet pipe diameters, header system piping methods, application methods for functional auxiliary equipment units, and header system installation spaces and location.

• ETRI Journal
• /
• v.38 no.5
• /
• pp.922-933
• /
• 2016

IP header compression schemes offer a valuable measure for bandwidth preservation. Such schemes have been practically implemented in infrastructure-based IP networks for point-to-point links. However, minimal research and practical implementation efforts have been conducted in the direction of an IP header compression strategy that can meet the peculiar requirements of multi-hop ad hoc wireless networks. In this paper, we present a practically implemented multi-hop IP header compression scheme using the Robust Header Compression (ROHC) protocol suite. The scheme runs on a novel identifier (ID) based networking architecture, known as an ID-based ad hoc network (IDHOCNET). IDHOCNET additionally solves a number of bottlenecks of pure IP-based ad hoc networks that have emerged owing to IP address auto-configuration service, distributed naming and name resolution, and the role of an IP address as an identifier at the application layer. The proposed scheme was tested on a multi-hop test bed. The results show that the implemented scheme has better gain and requires only O (1) ROHC contexts.

• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.10-16
• /
• 2019

Semiconductor chip is bonded to the substrate by melting solder bumps. In general, the chip bonding is applied by a Reflow process or a Thermo-Compression(TC) bonding process. In this paper, we introduce a Laser Assisted Thermo-Compression bonding (LATCB) process to improve the anxiety of the existing process(Reflow, TC bonding). In the LATCB process, the chip is bonded to the substrate by irradiating a laser with a uniform energy density in the same area as the chip to melt only the solder bumps and press the chip with a Transparent Compression Module (TCM). The TCM consists of a fused silica header for penetrating the laser and pressurizing the chip, and a piezoelectric actuator (P.A.) coupled to both ends of the header for micro displacement control of the header. In addition, TCM is a structure that can pressurize the chip and deliver it to the chip and solder bumps without losing the energy of the laser. Fused silica, which is brittle, is vulnerable to deformation, so the header may be damaged when an external force is applied for pressurization or a displacement differenced is caused by piezoelectric actuators at both ends. On the other hand, in order to avoid interference between the header and the adjacent chip when pressing the chip using the TCM, the header has a notch at the bottom, and breakage due to stress concentration of the notch is expected. In this study, the thickness and notch length that the header does not break when the external force (500 N) is applied to both ends of the header are optimized using structural analysis and Coulomb-Mohr failure theory. In addition, the maximum displacement difference of the P.A.s at both ends where no break occurred in the header was derived. As a result, the thickness of the header is 11 mm, and the maximum displacement difference between both ends is 8 um.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.224-227
• /
• 2012

In the Cluster-Based Routing Protocol (CBRP), a cluster header in each cluster is selected. The cluster headers consume energy much more than other nodes because they manage and operate all of mobile nodes in their cluster. The traditional CBRP selects a cluster header without considering the remaining energy of each node. So, there exists problems that the cluster header has short average lifetime, and another cluster header should be selected frequently. In this paper, we propose the advanced protocol which prolongs the lifetime of the cluster header and enhances the stability of the path. In order to achieve this, when a cluster header is elected in a cluster, the remaining energies of all of nodes are compared with one another, and the node with the highest energy is selected as the cluster header.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.9
• /
• pp.687-697
• /
• 2006

The air and water flow distribution are experimentally studied for a heat exchanger composed of round headers and 10 flat tubes. The effects of tube protrusion depth as well as mass flux, and quality are investigated, and the results are compared with the previous 30 channel results. The flow at the header inlet is annular. For the downward flow configuration, the water flow distribution is significantly affected by the tube protrusion depth. For flush-mounted geometry, significant portion of the water flows through frontal part of the header. As the protrusion depth increases, more water is forced to the rear part of the header. The effect of mass flux or quality is qualitatively the same as that of the protrusion depth. Increase of the mass flux or quality forces the water to rear part of the header. For the upward flow configuration, different from the downward configuration, significant portion of the water flows through the rear part of the header. The effect of the protrusion depth is the same as that of the downward flow. As the protrusion depth increases, more water is forced to the rear part of the header. However, the effect of mass flux or quality is opposite to the downward flow case. As the mass flux or quality increases, more water flows through the frontal part of the header. Compared with the previous thirty channel configuration, the present ten channel configuration yields better flow distribution. Possible explanation is provided from the flow visualization results.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.57-64
• /
• 2009

In order to efficiently provide IP based Wireless Broadband services in Mobile WiMAX, schemes for more efficiently utilizing a limited bandwidth in radio links are needed. Robust Header Compression (ROHC), a standard header compression scheme proposed by IETF, Bi-directional Optimistic (O) mode provides higher compression efficiency and robustness compared with Payload Header Suppression (PHS) which is an optional header compression scheme for mobile WiMAX [1, 2]. However, if consecutive packet losses occur because of a Shadow Region of Mobile WiMAX or bit errors, header decompression failure rate of the ROHC O mode increases due to inconsistency of the compression information between the Compressor and the Decompressor. Therefore, a complementary mechanism is needed. In this paper, we propose an approach for the dynamic adjustment of an optimistic parameter, which has an effect on both the compression efficiency and the robustness, for improving the performance of ROHC O mode. We also analyze the performance of the proposed approach using an OPNET simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.296-304
• /
• 2010

MoIP is technology to transmit a variety of multimedia over IP, but compared to traditional voice services require greater bandwidth and radio resources in a wireless environment has already reached the limits. Therefore, as a way to resolve this issue for header compression is a lot of research. SCTP protocol header compression using ROHC-SCTP has been research, ROHC-SCTP packet structure of the ROHC algorithm with different types and, SCTP header compression to apply the characteristics of the poor performance of many of these have drawbacks. Therefore, in this paper to solve these problems better header compression algorithm was designed. In this paper, the proposed algorithm to evaluate the NS-2 simulation environment was modeled on the header compression operation. Evaluation results, the algorithm designed in this paper compared to ROHC-SCTP algorithms determine the overhead rate was low, the data types vary a lot better when the total header size was small.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.7
• /
• pp.983-996
• /
• 2001

Mobile Ad Hoc Network (MANET) is a network architecture which has no backborn network and is deployed temporarily and rapidly in emergency or war without fixed mobile infrastructures. All communications between network entities are carried in ad-hoc networks over the wireless medium. Due to the radio communications being extremely vulnerable to propagation impairments, connectivity between network nodes is not guaranteed. Therefore, previously developed routing algorithms in wired networks cannot be used. And many new algorithms have been undergone. This study proposes the Secondary Header approach to the cluster based routing protocol (CBRP). In case, the main header becomes abnormal status so that the main header can not participate the communications between network entities, the secondary header immediately replaces the primary header without selecting process of the new primary header. The performances of proposed algorithm CBRP-SH(Cluster Based Routing Protocol using Secondary Header) are compared with CBRP and results are presented in order to show the effectiveness of the algorithm.

• Journal of Biosystems Engineering
• /
• v.14 no.2
• /
• pp.85-93
• /
• 1989

This study was intended to develop the system which controls header height of combine automatically by means of sensing the difference between the header and the ground surface. A micro-computer was used for the controller. The sensing unit designed for the study was composed of potentiometer, oscillating link, and gage wheel. An electric-hydraulic circuit was driven by microcomputer to control header height of combine. Performance of the control system was tested by computer simulation, stationary operation of header, and traveling on the simulated ground.