• Journal of Korea Water Resources Association
• /
• v.34 no.5
• /
• pp.459-472
• /
• 2001

The objective of this study is to evaluate the filtration efficiency of deep-bed filters by comparing to single and dual media filters. Pilot-plant tests using four-filter columns were conducted for the comparison of head loss development and filtered water quality. The dual-media filter showed greater initial head loss, but less rate of head-loss development than those of the coarse-sand-0deep-bed filters. For 180 m/day of filtration rate, the dual-media filter produces larger unit production rate by 30-40%, and the turbidities of filtered water were below 0.1 NTU. The initial breakthrough could be effectively controlled by the dual-media filter rather than coarse-sand-deep-bed filters.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.25 no.3
• /
• pp.47-55
• /
• 2019

Purpose: This study tries to propose the dimensions and area related to patient bed and surroundings in ICU considering nurses' observation and medical care. Methods: Literature survey, 11 Case studies, some Interviews with nurses and measuring of medical equipments' dimension in ICU have been mobilized in order to deepen the ICU bed area standards. Results: 0.3m clearance between head wall and patient bed is necessary for emergency cases. The minimum distance at the foot of the bed should not be less than 0.9m for EMR cart and medical tray. The clear floor area of one bed and surroundings in open ward is $10.2m^2(3m{\times}3.4m)$. In a single-bed patient room, the minimum clear floor area is $16.0m^2(4m{\times}4m)$. Considering the control of cross infection in ICU, Single bed patient room is recommended. Implications: The result of this study can be applied to the design of ICU and legislation of ICU standard.

• Journal of Biosystems Engineering
• /
• v.37 no.3
• /
• pp.155-165
• /
• 2012

This study was performed to offer the data for design of the seedling bed transfer equipment to make the automation of working process in a plant factory. The seedling bed transfer equipment pushing the seedling bed with bearing wheels on the rail for interconnecting each working process by a pneumatic cylinder was made and examined. The examined transfer force to push the seedling bed with a weight of 178.9 N by the pneumatic cylinder with length of 60 cm and section area of 5 $cm^2$ was measured by experiments. The examined transfer forces was compared with theoretical ones calculated by the theoretical formula derived from dynamic system analysis according to the number of the seedling bed and pushing speed of the pneumatic cylinder head at no load. The transfer function of the equipment with the input variable as the pushing speed $V_{h0}$(m/s) and the output variable as the transfer force f(t)(N) was represented as $F(s)=(V_{h0}/k)(s+B/M)/(s(s^2+Bs/M+1/(kM))$ where M(kg), k(m/N) and B(Ns/m) are the mass of the bed, the compression coefficient of the pneumatic cylinder and the dynamic friction coefficient between the seedling bed and the rail, respectively. The examined transfer force curves and the theoretical ones were represented similar wave forms as to use the theoretical formular to design the device for the seedling bed transfer. The condition of no vibration of the transfer force curve was $kB^2>4M$. The condition of transferring the bed by the repeatable impact and vibration force according to difference of transfer distance of the pneumatic cylinder head from that of the bed was as $Ce^{-\frac{3{\pi}D}{2\omega}}<-1$, where ${\omega}=\sqrt{\frac{1}{kM}-\frac{B^2}{4M^2}}$, $C=\{\frac{\frac{B}{2M}-\frac{1}{kB}}{\omega}\}$, $D=\frac{B}{2M}$. The examined mean peak transfer force represented 4 times of the stead state transfer force. Therefore it seemed that the transfer force of the pneumatic cylinder required for design of the push device was 4Bv where v is the pushing speed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.1
• /
• pp.23-30
• /
• 1982

The aim of this report is to analyze the Occurring rate of damage at each region of head works and to clear its damaged mechanism, centering around the destroyed situations of head works along both Musim and Bochong Rivers suffered from the storm flood occurred on July 22, 1980. The results obtained from the investigation of 25 head works taken for samples are summarized as follows. 1. The occurring rate of damage at each region of head works showed the largest number of 100 percentage in the revetment and protected riverbed work respectively, in the order of the next largest number, 68 percentage in weir body, 56 percentage in apron and 36 percentage in bank. 2. The destructive damage of revetment influenced largely on sweeping bank away, and destructive sufferings of weir body and protected bed work affected on the destructi on of apron, otherwise the destructive sufferings of apron reversely also acted on the- destruction of weirbody and protected bed work. In other hand, partial damage of weir body at the side of revetment is largely influenced by destructive sweeping away of bank. 3. It was showed that the destructive phenomena of weir body occurred largely at the part of concentrated flow and also had a deep relation with scoring by concentrated flow around upstream foundation of weir. 4. The suffered region of revetment is the down stream part just near weir body and the degree of damage is more severe at the curved part of bank that center of flow is concentrated.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.19-22
• /
• 2008

For the assembly and evaluation of solid immersion lens (SIL) optical head which is the key component of SIL based near field recording (NFR) technology, we modify the Twyman-Green interferometer. Super-hemisphere SIL optical head for the surface recording is assembled and evaluated by the modified Twyman-Green interferometer. In order to verify the optical performance of the assembled SIL optical head, we compare the measured results of the SIL optical head with the simulation ones. Finally, we show the feasibility of applying the assembled SIL optical head to near field recording system by the experiment of the dynamic gap control based on test bed.

• Journal of the Korea Furniture Society
• /
• v.28 no.3
• /
• pp.145-155
• /
• 2017

This study explores developing a piece of modularized and multi-useful bed adapting PyeongSang followed by the last issue, 'a study on traditional Korean furniture, PyeongSang I' for the understanding of the furniture from theory and history. Adopted From the joints and ornament, the modularized elements were designed and developed in order to compose the head board, the side board, the foot board, and the seat bottom. The joints are sambang miter, samae miter, dado, and mortise and tenon, which are strong in holding the bed. And the ornament is lattice patterns like geokjamun and manjamun, elephant eyes patterns like ansangmun from the traditional furniture. Using the elements, the bed is composed with six modules which make people free and easy to move and transform them. Hence, the bed is multi-useful by using the double, the twin the single, and various sofas by the way to display them such as two, three, four, five, and six modules. And the bed was made of bright zelkova tree and dark heat treated ash expressing contrast of black and white, the design concept modern and easy to make many people access to them.

• Korean Journal of Head & Neck Oncology
• /
• v.34 no.2
• /
• pp.85-87
• /
• 2018

The arteriovenous malformation (AVM) is an anomaly of capillary development that results from direct connection between branches of artery and vein without intervening capillary bed. The neurogenic tumors have a tendency to various types of degeneration. Recently, we experienced a 73-year old man with a mass in left supraclavicular area. The intraoperative findings showed severe adhesions with cervical plexus, like a neurogenic tumor. Finally, the mass was revealed as AVM. We report a unique disease pattern with a literature review.

• Journal of Communications and Networks
• /
• v.11 no.1
• /
• pp.72-83
• /
• 2009

We have studied the effect of head of the line blocking (HOLB) on session initiation protocol (SIP) session establishment delays. Our results are based on experiments performed in a test bed and on the public Internet. We used the stream control transmission protocol (SCTP) as a transport for SIP because SCTP can be configured to suffer or to avoid HOLB. Our experiments show that the effect of HOLB on session establishment delays generally starts to be significant starting at fairly low packet loss rates. However, there are scenarios where network conditions are good enough to make the effect of HOLB insignificant.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.370-378
• /
• 2003

Continuous seismic refraction, reflection and echo-sounder surveys conducted at Koyna Project site provided geotechnical information which helped in choosing the alignment for Head race tunnel and in designing and choosing the site for Lake Tap. Seismic refraction survey both on land and in shallow water determined depths to bedrock and helped in inferring the bedrock quality. Seismic reflection survey mapped the subsurface stratigraphy with high resolution. Reservoir-bed and bedrock contours drawn from the results of the survey helped in choosing the tunnel alignment and the lake tap position cost effectively. It was inferred from the results of the survey that the geology and the quality of rock do not change unexpectedly around the site for extension of Head race tunnel and the lake tapping. The bedrock levels evaluated by seismic survey agreed remarkably well with those inferred in boreholes having Rock Quality Designation 90 percent or more.

• Korean Journal of Head & Neck Oncology
• /
• v.32 no.1
• /
• pp.25-28
• /
• 2016

A 54-year-old female presented with a 4cm sized painless, submandibular gland area mass. Vascular lesion was suspected in computed tomography scan. Surgical excision was performed via retroauricular approach for its excellent cosmetic outcome. The vascular mass with peripheral focal calcification was clearly resected without complication such as bleeding or neural damage. Histopathological examination of the specimen revealed an arteriovenous malformation(AVM) with abnormal communications between arteries and veins without the normal intervening capillary bed. We report a successful excision of AVM in the submandibular space via retroauricular approach.