• 한국양식학회:학술대회논문집
• /
• 한국양식학회 2003년도 추계학술발표대회 논문요약집
• /
• pp.56-57
• /
• 2003

실고기과(Syngnathidae)에 속하는 해마류는 5300만년전부터 지구상에 존재해온 어류로 전 세계적으로 72%에 해당하는 32종이 인도-태평양연안에서 서식하는 것으로 알려져 있다. 그리고 약제와 관상무역에서 넓은 시장을 형성하며 그 수요가 지속적으로 증가하고 있다. 그러나, 국내에서는 아직 해마의 서식지와 초기생활사에 대한 연구가 전무한 실정으로 이번 연구에서는 최근 발견된 한국산 해마의 서식지와 채집된 2종 해마의 치어 초기생활사를 보고한다. 2003년 8~9월에 전라남도 여수시와 고흥군 주변해역에서 해마, Hippocampus coronatus 18마리(전장 40.8~79.5mm), 산호해마 H, japonicus 80마리(전장 28.1~56.3mm)가 채집되었고, 순환여과식 사육수조에서 사육하면서 자연산란한 치어를 대상으로 초기생활사를 관찰하였다. 사육은 유리로 된 사각수조(50$\times$30$\times$28cm)에 여과조(26$\times$26$\times$28cm)를 연결한 순환여과시스템에서 실시하였으며, 사육수온은 26.0$\pm$0.5$^{\circ}C$, 염분 32$\textperthousand$ 전후, pH 7.74 전후 그리고 DO 6.8mg/$\ell$ 전후였다. 먹이는 부화 2일령까지는 로티퍼, Brachionus rotundiformis를 단독 급이하였고, 부화 후 3일령부터는 로티퍼와 알테미아, Artemia sp.를 혼합 급이하였다. 치어의 성장 측정은 만능투영기를 이용하여 각 20마리를 무작위 추출하여 측정하였고 각 측정 부위별로 0.001mm까지 측정하였다. 이번 조사에서 전라남도 여수시와 고흥군 주변해역에서 채집된 해마류는 해마(H. coronatus) 18개체, 산호해마(H. japonicus) 80개체의 2종이 채집되었고 순환여과시스템에 사육하던 중 5회 산란하였다. 해마(H. coronatus)는 부화 후 9~10일째에 Total length 11.67~15.98mm(평균 5.19mm, n=20), Trunk length 2.48~3.31mm(평균 2.63mm, n=20), Head length 1.31~2.27mm(평균 1.76mm, n=20) 그리고 Snout length 0.74~l.67mm(평균 1.09mm, n=20) 이었다. 한편, 부화 직후 산호해마(H. japonicus)의 치어는 난황을 거의 흡수한 상태였으며 부화 후 2~3일째 Total length 4.29~5.70mm(평균 5.09mm, n=30), Trunk length 2.06~2.73mm(평균 2.55mm, n=30), Head length 1.50~l.79mm(평균 1.06mm, n=30) 그리고 Snout length 0.81~l.14mm(평균 0.97mm, n=30)였다. 그리고 부화 후 5~6일째에는 Total length 4.33~6.33mm(평균 5.19mm, n=20), Trunk length로 2.48~3.31mm(평균 2.63mm, n=20), Head length 1.31~2.27mm(평균 1.76mm, n=20) 그리고 Snout length 0.74~l.67mm(평균 1.09mm, n=20) 이었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권1호
• /
• pp.1-7
• /
• 2019

In order to analyze the factors affecting incidence angle and incident point when conducting a general radiography using Sella Turcica, the length and width of the head bone according to age and gender, length and width of Sella Turcica, and the distance between the front and the top of EAM to Sella Turcica were measured. The subjects were 400 patients who underwent a Skull series. For statistical analysis, t-test and ANOVA analysis were conducted using SPSS Ver.22.0. For post-test, Duncan was conducted and if the results were 95% or more (p<.05), it was determined to be significant. As a result of this study, the average length of the head bone was 177.45 mm, where the males were 182.84 mm and the females were 172.05mm showing that males were measured longer (p<.001). The width of the head bone was 116.98mm on average, where the males were 119.18mm and the females were 114.77mm(p<.001) showing that males were measured longer. The average length of Sella Turcica was 4.59mm, where the males were 4.54mm(p<.001) and the females were 4.63mm(p<.001) showing that females were measured longer. The average length of Sella Turcica was 7.08mm, where the males were 7.01mm(p<.001) and the females were 7.16mm(p<.001) showing that females were measured longer. The general radiology examination of Sella Turcica at a medical facility should be conducted in consideration of age and gender in accordance with the characteristics of Koreans.

• 한국발생생물학회지:발생과생식
• /
• 제21권1호
• /
• pp.63-69
• /
• 2017

On the 15 days after hatching, the larvae was 4.24-5.10 mm (mean $4.66{\pm}2.18mm$) in total length, and the fins of the membrane started to develop into a fan shape and the melanophore was deposited upper the alimentary canal of the abdomen and on the bladder. At 35 days after hatching, the post-larvae formed a branch-shaped melanophore on the head part with a total length of 6.98-12.5 (mean $9.35{\pm}1.71$) mm, formed on the upper and lower parts of the caudal part, formed on the upper and lower parts of the caudal part, and deposited under the head part and abdomen. At 40 days after hatching, the juvenile was 11.3-18.1 (mean $14.9{\pm}1.53$) mm in total length.

• 반도체디스플레이기술학회지
• /
• 제18권1호
• /
• pp.92-96
• /
• 2019

In the presence of ${\mu}-tip$ embedded in a slot-die head for stripe coatings, there arises the capillary flow that limits an increase of the stripe density, which is required for the potential applications in organic light-emitting diode displays. With an attempt to suppress it, we have employed a computational fluid dynamics software and performed simulations by varying the ${\mu}-tip$ length and the contact angles of the head lip and ${\mu}-tip$. We have first demonstrated that such a capillary flow phenomenon (a spread of solution along the head lip) observed experimentally can be reproduced by the computational fluid dynamics software. Through simulations, we have found that stronger capillary flow is observed in the hydrophilic head lip with a smaller contact angle and it is suppressed effectively as the contact angle increases. When the contact angle of the head lip increases from $16^{\circ}$ to $130^{\circ}$, the distance a solution can reach decreases sharply from $256{\mu}m$ to $44{\mu}m$. With increasing contact angle of the ${\mu}-tip$, however, the solution flow along the ${\mu}-tip$ is disturbed and thus the capillary flow phenomenon becomes more severe. If the ${\mu}-tip$ is long, the capillary flow also appears strong due to an increase of flow resistance (electronic-hydraulic analogy). It can be suppressed by reducing the ${\mu}-tip$ length, but not as effectively as reducing the contact angle of the head lip.

• 한국해양학회지
• /
• 제4권1호
• /
• pp.17-35
• /
• 1969

This work concerns morphological studies of the Japaness jack mackerel, Trachurus japonicus(Temminck & Schlegel). A total of 48 random samples consisting of 2669 fish is examined, representing three geographic regions, namely, Kamakura, Nagasaki, and Tottori. Preservation affects length and weight of fish considerably, but the variability after 10 days is shown to be negligible. The variability in measuring the morphometric characters due to different measures and orders is found to be significant. They are relatively small, however, compared to the variability in mean length to be expected in samples drawn from the population. Two meristic characters, namely, anal and second dorsal fin rays and three morphometric characters, namely, head length, first and second dorsal insertion distances are chosen for the study. Results of the statistical analysis reveal that differences in the selected meristic characters among samples within and between regions are found to be significant. In general, it is reasonable to state that the jack mackerel collected in Nagasaki region, on the average, have greatest number of anal fin ray and second dorsal fin ray followed by Kamakura, and Tottori regions in that order. It is found that although no significant differences in the slope of regression line are noticed, the mean differences of the selected morphometric measurements in relation to fish length are found to be significant among samples within each region. Differences in the regression coefficients as well as the adjusted sample means are found to be significant between regions. The analysis suggests that samples from Nagasaki region, on the average, have longest head length and greatest distances from snout to the insertion of first dorsal and second dorsal fins followed by Kamakura, and Tottori regions in that order.

• 한국수산과학회지
• /
• 제56권3호
• /
• pp.324-330
• /
• 2023

We investigated the relative growth and squamation of larvae and juveniles of cultured Larimichthys polyactis. Analysis of the relative growth of larvae and juveniles showed that their preanal length, head length, eye diameter, body depth, and snout length increased with growth. There was no significant chage in the relative growth. The ratio of preanus length to standard length (SL) increased rapidly until SL was approximately 12 mm, and then increased gradually. Cycloid scales first appeared on the lateral line, progressed to the abdominal cavity at 15.13 mm SL, and expanded to the occipital region, base of pectoral fin, and ventral region of the eye at 17.82 mm SL. At 18.03 mm SL, scales formed on the cheek, and those at the base of pectoral fin and in the abdominal cavity were connected to each other. At 19.06 mm SL, major part of the head was covered by scales, except near the lower jaw. Cycloid scales on the lateral line changed to ctenoid scales at the range of 31.71-32.24 mm SL, and those on the nape changed at the range of 69.02-70.84 mm SL. Our results may help to establish conservation and management strategy for Larimichthys polyactis aquaculture.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.163-166
• /
• 1997

In order to shorten head-way time on existing railway lines without any change of signal block length between stations, it is a realistic optional way to change the control method of train signal, i.e. to modernize the cab signal using transponder. A new signalling system of operation pattern control technique is suggested as new model to increase the railway traffic efficiency. Through the computer simulation of this model, the train head-way time by the fixed signalling system and the new pattern control system is analyzed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.171-175
• /
• 2010

Various soil characteristics for safe construction is necessary to understand the tests using the samples collected, and head in place an energy evaluation is conducted to evaluate the ground. In-Situ testing ground, Rod length and around the intrusive when the energy loss due to friction has been measured only in the head. Abstract The purpose of this agreement when increasing contract area of Rod agreement to transform the energy attenuation and the attenuation at the energy being delivered to evaluate. To this end, the same material used in the field test, laboratory test to apply Rod diameter and length have been considered, designed to perform the experiment was to use the Rod. Energy that raised at head of Rod, was increased and decreased by contracting type. The energy difference occurs in the head with the tip that shows the energy rating may be required at the tip is showing. Abstract The energy evaluation for the Rod field test to be at the basic sources and will be able to calculate the trusted information are measured from the tip.

• 대한간호학회지
• /
• 제24권4호
• /
• pp.584-596
• /
• 1994

The objective of the study is to explore the relationships between the variables of nursing productivity on the framework of system del in the tertiary university based care hospital in Korea. Productivity is basically defined as the relation-ship between inputs and outputs. Under the proposition that the nursing unit is a system that produces nursing care output using personal and material resources through the nursing intervention and nursing care management. And this major conception of nursing productivity system comproises input, process and output and feed-back. These categorized variables are essential parts to produce desirable and meaningful out-put. While nursing personnel from head nurse to staff nurses cooperate with each other, the head nurse directs her subordinates to achieve the goal of nursing care unit. In this procedure, the head nurse uses the leadership of authority and benevolence. Meantime nursing productivity will be greatly influenced by environment and surrounding organizational structures, and by also the operational objectives, the policy and standards of procedures. For the study of nursing productivity one sample hospital with 15 general nursing care units was selected. Research data were collected for 3 weeks from May 31 to June 20 in 1993. Input variables were measured in terms of both the served and the server. And patient classification scores were measured drily by degree of nursing care needs that indicated patent case-mix. And also nurses' educational period for profession and clinical experience and the score of nurses' personality were measured as producer input variables by the questionnaires. The process varialbes act necessarily on leading input resources and result in desirable nursing outputs. Thus the head nurse's leadership perceived by her followers is defined as process variable. The output variables were defined as length of stay, average nursing care hours per patient a day the score of quality of nursing care, the score of patient satisfaction, the score of nurse's job satis-faction. The nursing unit was the basis of analysis, and various statistical analyses were used : Reliability analysis(Cronbach's alpha) for 5 measurement tools and Pearson-correlation analysis, multiple regression analysis, and canonical correlation analysis for the test of the relationship among the variables. The results were as follows : 1. Significant positive relationship between the score of patient classification and length of stay was found(r=.6095, p.008). 2. Regression coefficient between the score of patient classification and length of stay was significant (β=.6245, p=.0128), and variance explained was 39%. 3. Significant positive relationship between nurses’ educational period and length of stay was found(r=-.4546, p=.044). 5. Regression coefficient between nurses' educational period and the score of quality of nursing care was significant (β=.5600, p=.029), and variance explained was 31.4%. 6. Significant positive relationship between the score of head nurse's leadership of authoritic characteristics and the length of stay was found (r=.5869, p=.011). 7. Significant negative relationship between the score of head nurse's leadership of benevolent characteristics and average nursing care hours was found(r=-.4578, p=.043). 8. Regression coefficient between the score of head nurse's leadership of benevolent characteristics and average nursing care hours was significant(β=-.6912, p=.0043), variance explained was 47.8%. 9. Significant positive relationship between the score of the head nurse's leadership of benevolent characteristics and the score of nurses' job satis-faction was found(r=.4499, p=050). 10. A significant canonical correlation was found between the group of the independent variables consisted of the score of the nurses' personality, the score of the head nurse's leadership of authoritic characteristics and the group of the dependent variables consisted of the length of stay, average nursing care hours(Rc²=.4771, p=.041). Through these results, the assumed relationships between input variables, process variable, output variables were partly supported. In addition it is also considered necessary that-further study on the relationships between nurses' personality and nurses' educational period, between nurses' clinical experience including skill level and output variables in many research samples should be made.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.992-993
• /
• 2002

We have fabricated the diffractive optical head(DOH) for optical pick up, which one adaptable to a optical recoding information storage. DOH consists of a focusing grating coupler(FGC) and a solid immersion Jens(SIL). FGC is device that the light converge into a focus by surface lattice. FGC have been studied as a potential application of pick up head for the information storage. In this study, FGC was designed and fabricated to make focus near to possible diffraction limit. We also fabricated recording head combined with SIL. The focus was measured in the range of $1.1{\mu}m$ as near to possible diffraction limit in the FGC having a focusing length of $600{\mu}m$ and a lattice area of 500 * $500{\mu}m$.