• 한국환경과학회지
• /
• 제26권10호
• /
• pp.1185-1200
• /
• 2017

Solid waste management is currently a topic of concern, particularly in the protection of humans and the environment from toxic pollutants and hazardous materials. The importance of solid waste management is recognized at international, national, and community levels. Different agendas have been prioritized and assigned to improve quality of life, productivity, and health, and reduce the burden of pollution. Suitable management of solid waste requires appropriate technology that is affordable, socially accepted, and environmentally friendly. The use of a smart management system involving system dynamics can save energy, money, and labor. System dynamics is a computer-based approach that aids in predicting the behavioral patterns of variables, and correlating dependent and independent variables. The inclusion of system dynamics-based models in solid waste management has recently become more common. In this review, we used system dynamics to determine methods to disentangle solid waste management systems and analyzed different studies on solid waste management using system dynamics in different countries in detail. We also discussed the various software packages that are available for system dynamics and their usefulness for waste management. This review may help in understanding current solid waste management practices using system dynamics.

• Environmental Analysis Health and Toxicology
• /
• 제28권
• /
• pp.17.1-17.3
• /
• 2013

The fact that hazardous metals do not bio-degrade or bio-deteriorate translates to long-lasting environmental effects. In the context of evidently rapid global industrialization, this ought to warrant serious caution, particularly in developing countries. In the Republic of Fiji, a developing country in the South Pacific, several different environmental studies over the past 20 years have shown levels of lead, copper, zinc and iron in sediments of the Suva Harbor to be 6.2, 3.9, 3.3 and 2.1 times more than the accepted background reference levels, respectively. High levels of mercury have also been reported in lagoon shellfish. These data inevitably warrant thorough assessment of the waste practices of industries located upstream from the estuaries, but in addition, an exposure and health impact assessment has never been conducted. Relevant government departments are duty-bound, at least to the general public that reside in and consume seafood from the vicinities of the Suva Harbor, to investigate possible human effects of the elevated hazardous metal concentrations found consistently in 20 years of surface sediment analysis. Furthermore, pollution of the intermediate food web with hazardous metals should be investigated, regardless of whether human effects are eventually confirmed present or not.

• Environmental Analysis Health and Toxicology
• /
• 제6권1_2호
• /
• pp.83-93
• /
• 1991

The specified industrial wastes increased 26% annually during the last 5 years from 1984 to 1988 in Korea, and the special treatment and proper management are required. The effective methods are studied on the process of generation, keeping, transportation, and treatment/disposal for specified industrial wastes and materials. Also, in this paper, the author describes the plans to develop the public disposal facilities and manage specific industrial waste properly in Korea.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.489-493
• /
• 2001

Big cities in Japan have serious problems due to the shortage of new reclaimed land for municipal wastes. If harmful heavy metals such as cadmium, lead, copper and etc. are contained in the municipal waste combustion residues, they are not able to fill up according to the environmental law in Japan. In this study, the removal of heavy metals in the fly ash (EP ash) was dealt with chloridizing vaporization method. EP ash as a non-hazardous materials is utilized as covering materials, road bed, and building materials.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1994년도 추계 총회 및 학술발표회
• /
• pp.8-11
• /
• 1994

Disposal of hazardous ions in the aqueous streams is a significant industrial waste problem.. Waste streams from electronics, electroplating, and photographic industries contain metal ions such as copper, nickel, zinc, chromium(IV), cadmium, aluminum, silver, and gold, amongst others in various aqueous solutions such as sulfates, chlorides, fluorocarbons, and cyanides. Typical plating solutions having similar compositions are listed in Table 1. Spent process streams in catalyst manufacturing facilities also contain precious metals such as Ag, Pt, and Pd. Developing an effective recovery process of these metal ions for reuse is important.

• Bulletin of the Korean Chemical Society
• /
• 제18권8호
• /
• pp.814-818
• /
• 1997

The chemical waste treatment, APEG (alkali/polyethylene glycol) process has been shown to be effective for the dechlorination of PCBs in transformer oil. Considerable amount of PCBs, however, still remains in the waste exceeding the 25-50 ppm limit set by regulatory agency. A new thermal regeneration technology has been developed in our laboratory for disposal of hazardous organic wastes. Due to the limited oxidation of carbon surface through the reverse movement of flame front to oxidant flow, this technology was termed counterflow oxidative system (COS). Specially, the oxidant flow in the COS process is a principal parameter which determines the optimum conditions regarding acceptable removal and destruction efficiency of adsorbed organic wastes at minimal carbon loss. The COS process, under optimum conditions, was found to be very effective and the removal and destruction efficiency of 99.99% or better was obtained for residual PCBs in the waste while bulk (≥90%) of carbon was recovered. Any toxic formation of polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzo furans (PCDFs) were not detected in the regenerated carbon and impinger traps. The results of surface area measurement showed that the adsorptive property of regenerated carbon is mostly reclaimed during the COS process.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.992-1003
• /
• 2003

This study analyzes the actual state of the working uniforms worn by burning waste workers to protect their body from the hazardous environment. Directions for improvement of the clothing fabrics is also suggested. We visited and interviewed those persons who worked in the burning waste plant in Seoul and in Gyunggi Province. 245 workers were surveyed by questionnaires, and 211 workers out of 245 were statistically analyzed. Frequencies and percentages were calculated and $\chi$$^2$ test, ANOVA and Scheffe Post hoc comparison methods were utilized to test some hypothesis. The working uniforms were classified as four general types: separate type, disposable-coverall. overall, and winter clothes. At present, the working uniforms are not suitable for the conditions which they are used. There is a lack of ventilation and an inability to absorb perspiration limited elasticity, and the uniforms are prone to static shock. The degree of satisfaction varied significantly, based on the worker's educational background and main work. However, only a small percentage of workers interviewed were satisfied with the appearance and the fit of the present working uniforms. The working duration had a negative impact on the satisfaction of the worker. This results suggest that materials, colors, design and size of working clothes must be improved. The suggestions are as follows: Firstly. to use disposable non-woven fabrics finished to increase moisture regain. Secondly. to use the bad air permeability fabrics to protect the skin from absorbtion of harmful gases, flying dust, heavy metals, etc.

• 청정기술
• /
• 제4권1호
• /
• pp.6-23
• /
• 1998

반도체 산업은 각종 전자지기의 발달로 급격히 성장하였으며 현재는 우리 나라에서도 반도체 산업이 경제에서 큰 비중을 차지하고 있다. 국내외의 환경규제와 환경에 대한 대중의 관심이 높아지면서, 반도체 공정의 안전한 관리와 환경유해성 물질의 배출억제를 위하여 반도체 산업에서의 청정기술의 개발이 시급한 과제가 되고 있다. 청정기술이란 근본적으로 환경유해성 오염물질을 배출하지 않는 기술을 의미하나 이는 지금까지 개발된 기술로는 거의 불가능하다. 따라서 공정 내에서부터 환경유해물질의 배출을 최소화하는 기술도 청정기술의 범위에 포함시킨다. 반도체 공정은 연속적인 화학공정들로 구성되어 있으며 그 과정에서 많은 종류의 환경유해성 오염물질이 배출될 수 있다. 반도체 공정에서 발생하는 오염물질들은 기상 형태의 배가스, 액상 형태의 폐수, 폐기물의 세 가지 형태로 나누어 볼 수 있다. 기상의 오염물질을 억제하기 위한 기술로는 오염물질만을 선택적으로 파괴하거나 오염물질만을 농축하여 공정 내에서 재활용하는 방법, 또는 오염을 유발하는 물질 대신 이를 대체할 수 있는 환경에 안전한 물질을 개발하는 방법 등이 있다. 액상의 오염물질을 저감시키는 기술로는 공정의 최적화를 통하여 오염물질의 양을 최소화하는 방법과 유독한 물질로 구성된 원료를 대체하는 방법 등이 있다. 또한 근본적인 오염원을 제거하기 위하여 화학물질의 사용량 자체를 줄이거나 기상을 이용한 세정 시스템 등의 방법을 사용하는 것도 연구중이다.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2001년도 정기총회 특별강연 및 춘계학술연구발표회(2)
• /
• pp.23-28
• /
• 2001

• 펄프종이기술
• /
• 제44권6호
• /
• pp.58-69
• /
• 2012

As the meaning of dictionary terminology, scum refers to a layer of impurities that accumulates at the surface of a liquid. In papermaking process, scum indicates the floated solid waste generated by a flotation process during the primary wastewater treatment. In this study, different kinds of stocks and scums collected from newspaper, liner, tissue and fine paper were analysed in details. The purpose of this study was firstly to demonstrate the composition characteristics of different sources of scum, secondly the analysis of environmental hazardous materials, and thirdly the evaluation of reutilization ability of fibrous materials from collected scum. As mentioned the meaning of solid waste, scum was actually differ from the waste sludge in sources, compositions and recycling abilities. In the same manner of waste paper, the sludge which is generated within onsite of papermaking processes would be reused as a raw material. The general compositions of scum from waste water were mainly inorganic ash materials, fine fibre fractions, recycled fibre debries, and ink particles. If the scum is able to reuse as fibrous additives in papermaking process, it could contribute to the savings of running costs in both the subsidiaries of fibrous material and the solid waste treatment with even small quantity.