• Applied Chemistry for Engineering
• /
• v.3 no.2
• /
• pp.213-223
• /
• 1992

Although landfill has been heavily relied upon as a final hazardous waste disposal method in Korea, the legal and technical problems associated with the landfill severely hinder proper disposal of hazardous wastes. The single largest legal problem is simply that, in spite of the recent amendments, the law regulating the hazardous waste landfill is yet in its primitive stage that even the lawful landfill sites cannot be regarded safe. The technical problems include improper selection of landfill sites, poor design and construction of landfill facilities, and lack of QA/AC and post-closure cares. These technical problems stem from inexperience and lack of resources. For the reduction of the potential danger from the improper landfills of hazardous wastes, it is an immediate need to further refine the law and to resolve the technical problems.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.15-19
• /
• 2006

The meat consumption produces a lot of bone waste everyday. Dumping bone waste without treatment results into environmental hazards. Conventional treatment by pyrolysis is slow, inefficient and produces hazardous by-products. In the work, an investigation of bone waste incinerated using thermal plasma technology is presented. A high temperature arc plasma torch operated at 33 kW was employed for the experiments. Bone waste was incinerated to remove the infectious organic matter and to vitrify the inorganic matter using plasma torch. Bone waste was reduced its 2/3 weight after the treatment. The process was highly efficient, economical, convenient, and fuel free. This method could be used as an alternative method for disposal of bone waste, small infectious animals, hazardous hospital waste, etc.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.3
• /
• pp.100-112
• /
• 1994

This tudy is to survey and analysis the water quality phase of Agricultural reservoirs through the case study of 18 reservoirs in Kyungpook Province in preparation for prevention disasters from the environmental hazards such as water pollutions. In these cases, the most hazardous pollution acts were Domestic animals excrements firstly, Human living wastge water secondly, Tourist resort sewage and Fertilize waste etc. in regular sequences. In the analysed results, pH, EC, BOD, DO, Cu, Ph, Cd were less than standard values recommended by the Environmental Authority and so they were estimated in scope of the safety value respectively. But few of factors being gradually closed with the hazardous point in the few places. At present, the hazardous environmental acts originated from the Domestic animals ex-crements, Human living waste water and Fertilize waste etc. in case the agricultural reservoirs, have to strongly be improved much better than before and prepared safety conditions for the rural living and agricultural life sciences.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.73-79
• /
• 2009

Hazardous materials (HazMats) are substances that are flammable, explosive, toxic, or harmful, if released into the environment. Since the transportation of HazMats increases in many developed countries, HazMat transportation has the key function in the process of HazMat usage to trace information of production, storage, shipment, usage, and waste disposal. The Korean Ministry of Environment (KMOE) and the National Emergency Management Agency (NEMA) have developed many laws, regulations, and standards for hazardous materials. However, the Korean HazMat laws, regulations, and standards do not guarantee accurate information of HazMat origin-destination (O-D) shipments, though the HazMat O-D movement is the critical information in safety and security of HazMat transportation. The objectives of this research are: (1) to investigate emerging and recurrent issues in Korean HazMat transportation, and (2) to develop the estimation method of O-D matrices for hazardous materials under limited data sets. The sodium hydroxide waste shipment among forty candidate HazMats is selected as the sample research case. The growth-factor method is applied to estimate the 2005 O-D matrix of sodium-hydroxide waste shipment. The column-and-row factoring process is used to calibrate the estimated sodium-hydroxide O-D matrix. The result shows the applicability of the O-D estimation process for hazardous materials. The Sodium Hydroxide Waste Origin-Destination Matrix is obtained to trace routes and paths of the Sodium Hydroxide transportation.

• Resources Recycling
• /
• v.29 no.2
• /
• pp.48-54
• /
• 2020

Korea, one of the manufacturing-oriented countries, consumes a large amount of metals in various industrial areas, but should depend on import of most of the metals from foreign countries. Also, global metal consumption amounts are increasing in relation to those of the world's reserve and production. Some metals are limitedly produced from only several centuries, which might lead to instability of the future supply of those metals. In addition, when such metals are hazardous, those may result in various environmental troubles with contamination. To resolve those issues, the recovery and the recycling of hazardous but valuable metals in industrial waste are desirable. However, there are overwhelming numbers of the metal types, waste generators, and amounts of wastes containing the metals, so it can be troublesome even to implement a preliminary status analysis to screen proper metals, wastes with the metals, and waste producers. Therefore, this study introduces the valuable metals for Korean industry, announced by public institutions, Also, a flow chart is suggested to facilitate a preliminary status analysis, using the domestic PRTR (Pollutant Release and Transfer Register) database, to screen proper waste producers containing some of hazardous but valuable metals such as nickel, cobalt, and manganese.

• Analytical Science and Technology
• /
• v.19 no.2
• /
• pp.172-180
• /
• 2006

This study was performed to establish new methods for hazardous substances and to develop an analytical method in specified wastes for preventing the environmental pollution caused by hazardous wastes. Therefore, the trends of international management, regulatory criteria, and items of hazardous wastes in various countries were investigated. Based on this study, target priority of new hazardous substances in specified wastes was established. An analytical method was developed using the waste standard reference materials of sludge, oil, bottom ash, etc., which contain the new hazardous substances (Ba, Be, Cr(VI), F, Ni, Sb, Se, and V). A total of 37 waste samples from the representative facilities, which are emitting new hazardous substances, were analyzed.

• 대한예방의학회:학술대회논문집
• /
• 1994.02a
• /
• pp.405-411
• /
• 1994

Hazardous wastes released into the general environment are of concern to the public and to public health authorities. In response to this concern, the Comprehensive Environmental Response, Compensation, and Liability Act, as amended (commonly called Superfund), was enacted in 1980 to provide a framework for environmental, public health, and legal actions concerning uncontrolled releases of hazardous substances. The Agency for Toxic Substances and Disease Registry (ATSDR) was created by Superfund to address the public health issues of hazardous wastes in the community environment. Two key Agency programs, Public Health Assessments and Toxicological Profiles, are designed to assess the risk to human health of exposures to hazardous substances that migrate from waste sites or through emergency releases (e.g., chemical spills). The Agency's public health assessment is a structured process that permits ATSDR to identify which waste sites or other point sources require traditional public health actions (e.g.. human exposure studies, health studies, registries, health surveillance, health advisories). The ATSDR qualitative public health assessment complements the U.S. Environmental Protection Agency's quantitative risk assessment. For Superfund purposes, both assessments are sitespecific. ATSDR's toxicological profiles are prepared for priority hazardous substances found most frequently at Superfund sites. Each profile presents the current toxicologic and human health effects information about the substance being profiled. Each profile also contains Minimal Risk Levels (MRLs), a type of risk assessment value. This paper covers ATSDR's experience in conducting public health assessments and developing MRLs, and it relates this experience to recommendations on how to improve chemical risk assessments.

• Science & Technology Policy
• /
• v.2 no.20 s.20
• /
• pp.26-28
• /
• 1992

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2009

Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

• Clean Technology
• /
• v.29 no.1
• /
• pp.1-9
• /
• 2023

Waste explosives such as useless ammunition discharged from the military and coproduced useless explosives during the manufacturers production process have been continuously produced. These are difficult to dispose with normal waste treatment facilities due to the dangers of fire and explosion. An open burning or an open detonation at military designated disposal facilities is a classical treatment method for the dangerous explosives. The classical method raises various environmental problems by the emission of hazardous materials. An air pollution by the emission of hazardous gases such as SO_x and NO_x, soil and water contaminations by the accumulation of non-biodegradable heavy metals, are representative pollution examples. To overcome these problems, various processes for eco-friendly waste treatment methods have been developed, and some processes have already been operated in some countries. In the current report, various eco-friendly disposal processes for waste explosives or harmful materials, and their advantages and disadvantages are documented to suggest future development directions for reducing the hazardous substances by the treatment processes.