• Journal of Advanced Marine Engineering and Technology
• /
• 제28권6호
• /
• pp.938-945
• /
• 2004

Intrinsic safety is generally considered the safest method of operating electrical instrumention in potentially explosive atmospheres. The method of intrinsic safety limits the energy passing into the hazardus area. The energy limitation is provided by the use of safety barriers which are mounted in the safe area. Because of the energy limitation, regardless of the fault in the hazardous area, sufficient energy cannot be released to ignite the explosive atmosphere. The following industries are known to have hazardous locations: chemical. munitions, petrochemical, auto(paint spray booths), grain, waste water, printing, distillers, pharmaceutical. breweries, cosmetics, and utilities. In this paper, a isolator type barrier for ship(LNG, LPG, etc,) and test equipment confidence are proposed. The test equipments are designed for mechanical electrical life time test and vibration. All of test results satisfy the goal and the studied barrier shows the improved confidence.

• 농약과학회지
• /
• 제8권1호
• /
• pp.30-37
• /
• 2004

우리나라에서 가장 널리 재배되는 토마토 과종인 방울토마토와 완숙토마토를 시설하우스에서 재배하여 두 과종 간에 비표면적을 측정하였으며, 농약의 잔류량을 분석하여 비표면적과 농약 잔류량과의 상관 관계를 조사하였다. 완숙된 토마토의 비표면적은 방울토마토가 $2.15cm^2g^{-1}$, 완숙토마토가 $1.00cm^2g^{-1}$로써 방울토마토의 비표면적이 약 2배 더 컸다. 농약의 물리화학적 성질과 제형이 다른 4종의 농약(타로닐 수화제, 크로로타로닐 액상수화제, 옥사딕실 쿠퍼 수화제, 지오판 수화제)을 선발하여 농약 잔류량을 측정한 결과, 방울토마토의 농약 잔류량이 완숙토마토보다 살포일수 및 살포횟수에 관계없이 $1.4\sim2.4$배 정도 많이 잔류되었다. 이러한 결과로 토마토 과종간의 비표면적의 비와 농약 잔류량이 상관성이 있는 것으로 확인되었으며, 농약살포 후 최종 수확 때까지 토마토의 비대생장이 없었기 때문에 농약 잔류량은 비표면적이 주된 인자로 작용한 것으로 보인다.

• 대한지리학회지
• /
• 제38권4호
• /
• pp.478-489
• /
• 2003

기존의 국내에서 안개 관련된 연구는 안개 자체에 대한 연구와 안개의 지역적인 분포에 대한 연구가 그 주류를 이루어 왔다. 본 연구는 도로상에서 시정을 저하시켜서 안전한 운행에 지장을 주고 교통-사고를 유발시킬 수 있는 안개를 도로위험안개로 정의하고 그 위험정도를 정량적으로 나타낼 수 있는 위험안개 발생지표를 개발하였다. 이 지표는 안전운행에 영향을 주고 사고를 유발시킬 수 있는 다양한 사항, 즉 안개의 발생빈도를 나타내는 안개발생일수, 안개의 지속시간, 시정거리 등을 고려하여 개발되었으며 개발된 지표에 근거하여 국내의 위험안개발생지역의 분포와 그 위험정도를 파악할 수 있었다. 본 연구는 한국의 안개특성을 고려하여서 위험정도를 정량화하고 가중치를 개발한 국내 최초의 연구라는 점에서 의의가 있고 개발된 지표에 근거한 위험지역의 안전관리 대상 선정과 그에 대한 안전시설물의 설치, 사고위험지점의 원인분석 및 그에 대한 대처방안 등을 수립하는데 유용한 자료로 사용될 수 있다. 더 나아가, 외국의 경우와 같이 도로의 노선선정시 위험안개발생지표가 높은 지역에 대해서는 노선의 변경 또는 노선선택 후 그에 대한 대책수립과 같은 적극적인 안전관리가 가능하다.

• 대한통합의학회지
• /
• 제9권3호
• /
• pp.79-86
• /
• 2021

Purpose : This study was conducted to provide fundamental data to prepare for countermeasure to protect health of workers in the dental clinics from hazardous chemical substance, and to assess effecting factors on management of Material Safety Date Sheet(MSDS) and handling of hazardous chemical substance among workers in dental clinics. Methods : This study was carried out a survey with structured self-administered questionnaire which was consisted of 7 questions about the management of MSDS, 9 questions about recognition and practice of hazardous chemical substances in dental clinics, and 7 questions about general characteristics. Total subjects of this study were 204 adult who workers in dental clinics located in Busan and Gyeng-nam province area. The collected data were analysed using the SPSS statistical package program (ver. 23.0). Results : The factor that positively affected factor on recognition and practice of hazardous chemical substances in dental clinics has experience that has been institutional health-care accreditation. The factor that positively affected the management of MSDS has experience that has been institutional health-care accreditation. Conclusion : It is necessary to prepare countermeasures such as campaign and education on cognition of general chemical substances, and also the author concern that it should be perform the education on handling of hazardous chemical substances in dental clinics for more effecting management of MSDS. In order to improve the management of MSDS and improve the awareness and safety of chemicals, it is necessary to encourage the implementation of the institutional health-care accreditation system or prepare guidelines for the management of MSDS.

• 한국식품위생안전성학회지
• /
• 제32권2호
• /
• pp.89-95
• /
• 2017

에너지 음료는 카페인을 주성분으로 타우린, 비타민 같은 다른 energy-enhancing 성분을 함유하고 있다. 미국과 유럽에서는 글루쿠로노락톤이 에너지 음료에 첨가될수 있으나, 국내에서 의약품으로는 허가되어 있다. 따라서 식품 첨가물로는 그 사용이 금지 되어 있어, 지속적으로 수입 및 유통 음료에서 시험검사를 하여 규제하고 있다. 현재 분석법으로 사용하는 LC-PDA 법은 복잡한 유도체화 과정을 거치고, 음료 중에 당류들이 위양성 결과를 나타내기도 한다. 이런 기존 방법의 단점을 개선하기 위해 HILIC-ESI-MS/MS(hydrophilic interaction liquid chromatography coupled to electrospray ionization tandem mass spectrometry)를 이용한 분석법을 개발하고, 선택성, 직선성, 검출한계, 정량한계, 정밀도, 정확성, 재현성에 대하여 분석법 유효성 검증을 수행했고, AOAC, EURACHEM 가이드라인에 부합되는 결과를 얻었다.

• 한국재난정보학회 논문집
• /
• 제20권1호
• /
• pp.47-59
• /
• 2024

연구목적: 인화성 액체의 누출형태에 따라 제조업 사업장 내 화재·폭발사고를 예방하기 위해 기존 폭발위험장소 구분도를 개선하여 점화원 및 가연물을 안전하게 관리할 수 있는 방안을 제안하고자 한다. 연구방법: 「KS C IEC 60079-10-1」를 사용하여 폭발위험장소를 계산했으며, 계산된 폭발위험거리를 3D로 폭발위험장소를 구현하였다. 또한, 3D를 통해 구현된 폭발위험장소 내 인화성 증기의 대기확산량을 계산하기 위해 「P-91-2023」 액체의 대기확산량 공식을 활용하였다. 연구결과: 폭발위험장소를 3D로 표현했을 때 평면도의 사각지대를 확인할 수 있었으며, 폭발위험장소 내 점화원을 즉각적으로 확인 가능하였다. 다음으로 가연물은 3D로 나타난 폭발위험장소 체적 내 LEL 도달시간을 계산했을 때, 폭발위험거리와 동일하게 위험도가 나타나지 않았다. 결론: 인화성 액체의 대기확산량을 고려하여 안전관리가 이루어져야 할 것으로 판단하였다. 따라서 사업장에서 현실적으로 시행할 수 있는 환기량으로 감지·경보가 필요한 농도값을 계산하는 방법을 제안하였다.

• 환경영향평가
• /
• 제16권6호
• /
• pp.485-494
• /
• 2007

Air pollution and traffic noise from roads distributed near residential area has been a major social problem. In this study, an environmental pollution map for a residential area of Shihung-city was made by an expectation model based on hourly traffic volume change. Using the result from the model, a plan to reduce population in the residential area was established. The result of the modelling is summarized as follows: 1. At peak traffic hours (18 o'clock), 301-500 degree in hazardous and $d_{25}$ degree (25% of the residents are suffering extremely from the noise) in noise pollution were predicted in Jeongwang Main Road in Shihung city. 2. The calculated critical pollutant standard index, PSI showed the air pollution level, especially PM-10 high enough to require re-entrainment. 3. It was expected air pollution would extensively extend over the area distribution of each degree. However, noise pollution problem was limited to the area near roads.

• 한국대기환경학회지
• /
• 제15권4호
• /
• pp.513-517
• /
• 1999

Problems of secondary pollution and hazardous pollutants have rapidly come to the front in our society during the past few years. More attention should be paid to monitoring and assessment in order to identify the nature of complicated problems, but our air-quality policy is hurriedly seeking for management strategies. A typical example is air quality management in the industrial estates such as those located in Yochon and Ulsan. Yochon Industrial Estate was designated as a special air-quality management area of volatile organic compounds(VOCs) in 1996. And VOCs in the air of Ulsan Industrial Estate has been specially controlled since 1997. In this paper, however, it is suggested that hazardous air pollutants(HAPs) rather than VOCs should have been managed in the industrial estates. History of studies on organic compounds in the air of the industrial estates is reviewed. A stepwise approach for air quality management in the industrial estates is recommended.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.625-629
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS (Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2000년도 춘계학술대회
• /
• pp.225-239
• /
• 2000

The objective of ECMS(Environmentally Conscious Manufacturing Systems) is to consider environmental effects through the entire product life cycle from product development stage to design, manufacturing, supplying, using and disposing stage. Recently, environment-oriented recycling, reusing and manufacturing technologies have been researched actively in every engineering fields. In the field of chemical engineering, HHS(Health Hazard Scores) which classifies and analyzes hazardous materials in production processes has been presented. Metal cutting processes also have a lot of harmful factors, and especially hazardous components in cutting fluids have been known to have a bad effect on workers and working area. However, research works such as HHS have been little accomplished in metal cutting processes. In this research, a environmentally conscious machining process is presented by classifying hazardous components in cutting fluids, by using LCA(Life Cycle Assessments) and HHS method, and by evaluating environmental effects from cutting fluids.