• Journal of Environmental Policy
• /
• v.4 no.2
• /
• pp.57-82
• /
• 2005

In this study, we propose methods for. the efficient management and integrity of groundwater in response to a diminishing supply. As an alternative water resource for the future. we investigated and comparatively analyzed the quality standards of groundwater in the US (New York, Wisconsin and Texas), Austria, Netherlands, Canada, Japan and United Kingdom. These developed countries heavily depend on groundwater, more than 70%, for drinking water and apply those drinking water standards to groundwater quality. However, there exists few differences in the quality standards of groundwater among the countries, because each country possesses its own individual environment and management. In Korea, surface water pollution is getting serious and its water resources are diminishing. Therefore we propose several new quality criteria that many countries regulate at these days for their efficient management of groundwater. There is a need to divide BTEX criterion into Benzene, Toluene, Ethylbenzene and Xylene, individually. In. addition, it is needed to establish BTEX criteria into agricultural water and industrial water use standards as well as daily life use standards. Also, regulations for some PAHs, showing carcinogenicity, are required. Due to rapid industrialization various hazardous chemicals were utilized and their uses are increasing each year. Therefore, there is a strong need to introduce n~w standards and tighter regulations of the levels. At the same time, the criterion of nitrogenous compounds need' to be regulated individually in order to prevent the damage incurred by the compounds. Several developed countries have established standards for radon, previously caused environmental accidents in Korea. Therefore, we propose the necessity of groundwater quality standards for radon in this study.

• Journal of Environmental Policy
• /
• v.13 no.4
• /
• pp.79-105
• /
• 2014

Natech risk is a type of complex disasters that natural hazards trigger technological disaster or industrial accidents. Research on Natech risk has been started from the mid-1990s in European countries and the Unites States, and drawn much more attention after the Fukushima nuclear accident caused by the 2011 East Japan earthquake. While early studies on Natech risk have focused on the causal natural hazards and possibility to occur, and the resulting spill of hazardous materials from the perspective of science and engineering, the recent research interests lie on effective Natech risk management. Especially, emphasizing the difference of Natech risk management from traditional disaster management, issues of uncertainty management, integration between natural disaster and technological disaster, and responsibility, has been drawn attention. In Korea, Natech risk has not been introduced as a research topic. Although some regulatory improvements have been made in nuclear safety and chemical Substance management after the Fukushima disaster, the potential impact of natural hazards in these areas has not been considered yet. It is necessary to raise the issues of Natech risk management in research and policy areas through active discussion and interdisciplinary approaches.

• Korean Journal of Health Education and Promotion
• /
• v.16 no.2
• /
• pp.157-171
• /
• 1999

This paper analyzed health practices of students in an university in Chollabukdo Province. It attempted to study how many university students had what kinds of health practices. Furthermore, it tried to find out what are the major problems in health practice among university students. To study health practices of university students, this study sampled 1,469 students randomly. Many of the students had poor practices of teeth care. In tooth-brushing, many students (35.8%) brushed their teeth before breakfast in the morning. Most of the students (95% or more) visit dental clinic only when they had problem(s) in their teeth. For weights, there exists a great gap between perception and BMI (Body Mass Index), especially among female students. Among the female students who perceived their weights were above average, 96.4% of them were normal according to BMI. Many of the students were drinking greater amount of alcohol than safe amount suggested by the National Health and Medical Research Council of Australia. The proportion of the students drinking harmful or hazardous amount of alcohol were 79.5% of the male students and 74.9% of the female students. It suggests that health promotion fund or tax need to be levied on alcohol to frustrate unhealthful drinking. More than half (59.0%) of the male students and about 6.0% of the female students were smoking cigarettes. The smoking initiation ages were 17.8 for male and 18.2 for female students. It means that many of the students started smoking in their junior high or high schools. It implies that smoking prevention and smoking cessation programs need to be emphasized in these schools. For perception on sex, 27.8% of the male students and 60.9% of the female students thought to keep their virginity before their marriage. The female students were more conservative in perception on sex. The average number of sexual intercourses per year of male students was 17.0 times with their lovers, 7.9 times with prostitutes, and 7.0 times with maids. The female students had sexual intercourses 5.0 times with their lovers and 4.0 times with waiters per year. The proportion of students who had experience of sexual intercourse with homosexual partners was 1.0%. The finding this study was that the university students were vulnerable to poor health practices. It is suggested that public health intervention program be provided for university students to keep them in good healthy lifestyle.

• Journal of the Korean Society of Safety
• /
• v.15 no.2
• /
• pp.70-77
• /
• 2000

For hazardous air pollutants(HAP) such as NO, $NO_2$ and $SO_2$ decomposition efficiency, power consumption, and applied voltage were investigated by SPCP(Surface induced discharge Plasma Chemical Processing) reactor to obtain optimum process variables and maximum decomposition efficiencies. Decomposition efficiency of HAP with various electric frequencies(5~50 kHz), flow rates(100~1,000 mL/min), initial concentrations(100~1,000 ppm) and additive($CH_4$) were measured and the products were analyzed with FT-IR. Experimental results showed that for the frequency of 10 kHz, the highest decomposition efficiency of 94.3 % for NO, 84.7 % for $NO_2$ and 99 % far $SO_2$ were observed at the power consumptions of 19.8, 20 and 19W, respectively, and that decomposition efficiency decreased with increasing frequency above 20 kHz. And decomposition efficiency per unit power were 5.21 %/W for $SO_2$, 4.76 %/W for NO and 4.24 %/W for $NO_2$ and the highest decomposition efficiency was observed with $SO_2$. Decomposition efficiency was increased with increasing residence times and with decreasing initial concentration of pollutants. When the additive of $CH_4$ was used, decomposition efficiency was increased with increasing $CH_4$ content, and NO, $NO_2$ and $SO_2$ were almost completely decomposed with the efficiency of 99 %, 98 % and 99 %, respectively and therefore $CH_4$ was a good additive material. The optimum power for the maximum decomposition efficiency were 7.5 W for $SO_2$, 9.5 W for NO and 15.5 W for $NO_2$, respectively. Optimum power with the maximum decomposition efficiency were 9.5 W at 1,000 ppm of NO, 7~8 W at 100~500 ppm of NO and 15.5 W at all concentration range of $NO_2$ and 11.5 W at 1,000 ppm, 4.9 W at 500 ppm, 3.7 W at 100~300 ppm of $SO_2$ and power efficiency was best in these case.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.4
• /
• pp.61-67
• /
• 2014

With a view to resolving environmental problems of hazardous cement, this study seeks to identify the unconfined compressive strength and bending strength of the vegetation block designed herein by utilizing high-strength natural soil stabilizer instead of cement. Soil stabilizer is mainly made of mixture of short fiber extracted from natural fiber and lime, etc. Soil stabilizer reinforces the shearing strength of soil to improve block supportive power and durability while preventing flood and frost damages. For the unconfined compressive strength test, test pieces were prepared by mixing soil stabilizer and weathered soil in different ratios of 6 %, 12 % and 18 %. Experiments were carried out according to curing periods of 5th, 7th, 14th and 28th of the day. For bending strength test, blocks were made in the same mixture ratios as for the unconfined compressive test and tested for each stage. Also, to evaluate for the field applicability, proposed optimum water content considering the characteristics of the soil stabilizer. Permeability test result for the vegetation block, satisfied by the KS F 4419 quality standards.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.5
• /
• pp.5-12
• /
• 2018

The porosity formation by the addition of additives was found to be the highest in the case of aluminum powder 3% and $Ca(OH)_2$ 2% under the condition that strength was maintained. The optimum mixing ratio of the binder was shown to be the most effective at (Ash+Food waste+clay):(water glass+colloidal silica) 7:3, and the temperature response is most economical and effective at $1,000^{\circ}C$. The optimal mixing ratio is the strength in 30% of ash, 30% of clay and 10% of food waste, which is the effective in non-point pollution water treatment. Filter media produced under optimal mixing conditions were analyzed as $SiO_2$ 65.8%, density $1.4g/cm^3$, porosity 25.6%, pH 9.8, and no hazardous substances were detected. As a result of the filtration of the water treatment, the mean concentration of the filtered SS was $14.06mg/{\ell}$, and the removal efficiency of SS was 90%, the recovery rate of the reversal is 97.1%. This enables the development of filter media considering economic efficiency and efficiency as well as the utilization of waste resources, enabling high value added of waste resources.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5B
• /
• pp.467-474
• /
• 2011

Debris flow is one of the most hazardous natural processes in mountainous regions. The degradation of discharge capacity of drainage facilities due to debris flows may result in damages of properties and casualty as well as road. Understanding and accurate reproducing flow behaviour of debris flows at various conditions, such as sediment volume concentration and approaching channel and culvert slopes, are prerequisite to develop advanced design criteria for drainage facilities to prevent such damages. We carried out a series of laboratory experiments of debris flows in a rectangular channel of constant width with an abrupt change of bottom slope. The experimental flume consists of an approaching channel part with the bed slope ranging $15^{\circ}$ to $30^{\circ}$ and the test channel with slope ranging from $0^{\circ}$ to $12^{\circ}$ which mimics a typical drainage culvert. The experiments have been conducted for 22 test cases with various flow conditions of channel slopes and sediment volume concentration of debris flows to investigate those effects on the behaviour of debris flows. The results show that, according to sediment volume concentration, the depth of debris flow is approximately 50% to 150% larger than that of fresh water flow at the same flow rate. Experimental results quantitatively present that flow behaviour and deposit history of debris flows in the culvert depend on the slopes of the approaching and drainage channels and sediment volume concentration. Based on the experimental results, furthermore, a logistic model is developed to find the optimized culvert slope which prevents the debris flow from depositing in the culvert.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.663-668
• /
• 2017

Dye waste water generated in the dye industry is categorized as hazardous waste water that requires appropriate treatment. The pilot scale experimental trials were carried out using dye waste water as an effective additive for the selective non-catalytic reduction (SNCR) of NOx in combustion flue gases. The additives were waste liquor obtained from the dye industry and several purification steps were taken to make a standardized reagents. The dye waste water was shown to possess valuable SNCR qualities (at least 87% NOx reduction efficiency) considering its availability as a waste product, which has to be strictly treated, and have little effects on CO removal. The results indicated that the NO removal efficiency increased first and then decreased with increasing temperature within $750-1150^{\circ}C$. The maximum NO reduction efficiency was approximately 87% at the optimal reaction temperature. A more than 10% increase in NO reduction was achieved in the presence of 1000 ppm Na-additives (dye waste water) compared to that without additives. The Na-based additives have also a significant promoting effect on $N_2O$ reduction and within the SNCR temperature window.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.308-316
• /
• 2020

This study attempted to derive an equation for calculating the damage impact distance using CARIS so that local governments can quickly determine evacuation and notification of residents in the event of an ammonia-release accident. Ammonia is an accident-causing substance and one of 16 substances to prepare for resident evacuation. It is the most frequently occurring chemical with 58 chemical accidents from 2014~2019. The study derives an equation for calculating the damage impact distance according to the exposure time of ammonia based on AEGL, an acute exposure standard applicable to the general population, which is includes vulnerable groups such as infants, children and the elderly and designated by the EPA. The calculation formulas for each concentration and exposure time to classify the hazardous area according to AEGL-3 and the semi-dangerous area according to AEGL-2 were derived. A comparison of the relative standard deviation between the damage impact distance values of CARIS revealed that is was in the range of 0~2%. Local governments should consider the actual accident situation and apply the appropriate damage-affected distance calculation formula derived from the study to evacuate residents near the origin of the accident or use for protective measures such as indoor evacuation notification.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.137-143
• /
• 2020

To ensure safety of raw materials for military foods, hazard assessment and monitoring of residual pesticides was conducted on agricultural products consumed by 9 companies based in Gyeongin and Gangwon. Residual pesticides were analyzed for 142 different products, by applying the multi-species pesticide polycomponent analysis method. Of the 36 samples analyzed, residual pesticides were detected in 7 samples, representing a detection rate of 19.4%. One particular pesticide residue was detected in peanuts, green onions, and red pepper powder, and 20 types of pesticide residues were detected in red pepper powder used in combat foods. However, all residues were found to be below the permissible level. Moreover, the hazard assessment results for Cypermethrin, Tebuconazole and EPN showed the highest concentration among the residual pesticides detected. Since the estimated intake was less than 100% as compared to the ingestion limit, it was considered to be safe. I have suggested the edit as per my understanding. Please review for accuracy, and revise appropriately if required. This is the first pesticide Risk Assessment study encompassing military requirements. Considering the results, we expect further application research, including research on reducing hazardous materials.