• Food Science and Preservation
• /
• v.15 no.6
• /
• pp.847-851
• /
• 2008

The handling and processing of agricultural products in Korea is done manually. Small plastic boxes, nets, and corrugated cardboard boxes are used as containers during harvesting, sorting and other product handling operations. However, these practices are labor-intensive, time-consuming, require various kinds of packing materials, and are expensive because of high operating costs. To overcome these problems, the use of pallet bins with pre-cooling and storage features for handling and processing bulk farm products was investigated. The airflow resistances through bulk potato, onion and mandarin stocks were measured, and the pallet bins and a pressure pre-cooling device were manufactured. The opening ratio, bed depth and airflow rate through bulk potato, onion and mandarin in the pallet bin were defined with regression equations. The cooling rates of bulk potato, onion and mandarin were 0.8C/h ($21.7{\rightarrow}0C$, 14.5 h), 0.4C/h ($15.4{\rightarrow}.0C$, 32.2 h) and 0.7C/h ($13.7{\rightarrow}C$, 18.8 h), respectively, with the pressure pre-cooling system. Temperature deviances for storage of bulk potato, onion and mandarin were 0.12C, 0.12C and 0.17C, respectively.

• Current Research on Agriculture and Life Sciences
• /
• v.27
• /
• pp.1-6
• /
• 2009

Persimmon occupied the second largest cultivation area next to apple among the fruits in Korea. Since 70 % of its cultivating field is located at slope, the efficiency of its harvesting operation is very low. Also, the traditional persimmon harvest apparatus does not seem to be efficient to use due to a structural problem. In this paper, the author has analyzed the physical properties of persimmon friut-stem system and compared detachment force with developed persimmon harvest apparatus and traditional persimmon harvest apparatus in order to solve the problems mentioned above. The results of the research are summarized as follows : 1. The weight of the persimmon is shown as 157 g on average, the lengths of stem's major axis and minor axis is shown as 4.6 mm and 3.7 mm on average, respectively, sectional area of stem is shown as $13.9mm^2$ on average and the stem length is shown as 13.6 mm on average. 2 In case of the traditional persimmon harvest apparatus, the detachment force needed when a persimmon was detached from its stem was shown as 86.3 N on average. 3. In case of the developed persimmon harvest apparatus, detachment force needed when a persimmon was detached from its stem was shown as 72.6 N on average.

• Journal of Bio-Environment Control
• /
• v.23 no.3
• /
• pp.167-173
• /
• 2014

This research was conducted to establish appropriate methods to prune tomato side stems during summer. Cherry tomatoes "Unicorn" (Monsanto Korea, Korea) were grown in the coir based growing medium, and irrigation was controlled time based system. There were three pruning treatments: 1) removing all side stems (ACUT), 2) remaining two leaves on the side stems right below any cluster (PCUT), and 3) remaining two leaves on all side stems (LEFT). Experimental results showed that the occurrence of swollen stems, a symptom of nutrient excess, was influenced by side stem pruning due to blocking of consumption of photosynthetic products. The photosynthetic rate was not different between leaves on main stem and those on side shoots. Therefore the differences in the total amounts of photosynthetic products seemed to come out from the differences in leaf areas on each treatments, influencing on fruit yield difference. The yields and harvesting rates were better in ACUT treatment when tomato plants were harvested until $5^{th}$ cluster, however tomato yield was higher in LEFT treatment when more then $5^{th}$ clusters were harvested.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.4
• /
• pp.243-250
• /
• 2000

Selection of oat variety according to cultivation period is an important to increase productivity of forage crop. To investigate the growth characters and dry matter productivity of oats according to cultivation period, early-maturing oat(EM0) and medium-maturing oat(MM0) variety were sown in spring and autumn at central district of Korea. When oats were cultivated in spring, MMO variety was longer 8 cm in leaf length and wider 5 mm in leaf width than 25 cm and 12 mm of EM0 variety, rexpectively. but in autumn, those were not different between maturities of oat varieties. Plant length of MMO variety was longer 7 cm than that of EM0 Variety in spring cultivation, but in autumn, plant length of EM0 variety was longer 14 cm than that of MMO variety. Heading dates were 20th to 22th May in EM0 variety, and 30th May to 10th June in MMO variety in spring cultivation, and ear of EM0 variety emerged 30th Oct. to loth Nov. but that of MMO variety did not emerge at harvesting day in autumn cultivation. In Spring cultivation, dry matter(DM) yield of EM0 variety was 7,349 kg/ha that was less 56% than 11,466 kg/ha of MMO variety, but In Autumn, was more 15% than 6,575 kg/ha of MMO variety. In conclusion, selection of oat variety in spring and autumn cultivation can be different with cropping system of forage crop, and this trial is suggesting that oat variety could be sown MMO variety in spring and EM0 variety in autumn at central district of Korea. (Key words : Oat variety, Productivity, Cultivation season)

• Journal of Biosystems Engineering
• /
• v.43 no.1
• /
• pp.1-13
• /
• 2018

Purpose: The development of compact tractors that can be used in dry fields, greenhouses, and orchards for pest control, weeding, transportation, and harvesting is necessary. The development and performance evaluation of power transmission units are very important when it comes to tractor development. This study evaluates the performance of a driving power transmission unit of a 50 kW multi-purpose narrow tractor. Methods: The performance of the transmission and forward-reverse clutch, which are the main components of the driving power transmission unit of multi-purpose narrow tractors, was evaluated herein. The transmission performance was evaluated in terms of power transmission efficiency, noise, and axle load, while the forward-reverse clutch performance was evaluated in terms of durability. The transmission's power transmission efficiency accounts for the measurement of transmission losses, which occur in the transmission's gear, bearing, and oil seal. The motor's power was input in the transmission's input shaft. The rotational speed and torque were measured in the final output shaft. The noise was measured at each speed level after installing a microphone on the left, right, and upper sides. The axle load test was performed through a continuous equilibrium load test, in which a constant load was continuously applied. The forward-reverse clutch performance was calculated using the engine torque to axle torque ratio with the assembled engine and transmission. Results: The loss of power in the transmission efficiency test of the driving power unit was 6.0-9.7 kW based on all gear steps. This loss of horsepower was equal to 11-18% of the input power (52 kW). The transmission efficiency of the driving power unit was 81.5-89.0%. The noise of the driving power unit was 50-57 dB at 800 rpm, 70-77 dB at 1600 rpm, and 76-83 dB at 2400 rpm. The axle load test verified that the input torque and axle revolutions were constant. The results of the forward-reverse clutch performance test revealed that hydraulic pressure and torque changes were stably maintained when moving forward or backward, and its operation met the hydraulic design standards. Conclusions: When comprehensively examined, these research results were similar to the main driving power transmission systems from USA and Japan in terms of performance. Based on these results, tractor prototypes are expected to be created and supplied to farmhouses after going through sufficient in-situ adaptability tests.

• Journal of Bio-Environment Control
• /
• v.13 no.2
• /
• pp.112-119
• /
• 2004

Objective of this research was to evaluate the effects of nutrient solution strength and Arbuscular Mycorrhizal Fungi (AMF, Glomus sp.) on growth and flowering of potted miniature rose (Rosa hybrids L. cv 'Scarlet'). To achieve this, plants cultured with six different strength of Japanese Horticultural Experiment Station solution (0.125, 0.25, 0.5, 1.0, 2.0, and $4.0\;{\times}\;{full}$ strength) and inoculated with AMP at cutting and transplanting. Leachate EC increased as solution strength were elevated. The leachate EC were not different between non-inoculated plants and AMF treatment at cutting, but significantly decreased when plants were inoculated with AMF at transplanting. The elevated strength of nutrient solution resulted in decrease of leachate pH. When plants were inoculated AMF at transplanting, leachate pH was lower than those of non-inoculated plants and inoculated with AMF at cutting. At harvesting (93 days after transplanting), plant height, leaf width, number of branches and shoot fresh and dry weight of rose 'Scarlet' increased with elevated nutrient solution strength. AMF treatment at transplanting of potted rose 'Scarlet' showed the best results in growth such as chlorophyll content, number of flowers, and shortening the days required to flower. The content of N, P, K, and Mn in leaf tissue of potted rose increased by elevated nutrient solution strength and AMF treatment, while the tissue Na contents decreased by an AMF treatment.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.30 no.2
• /
• pp.100-107
• /
• 2004

Schwann cell, one of important components of peripheral nervous system, interact with neurons to mutually support the growth and replication of embryonal nerves and to maintain the different functions of adult nerves. The Ara-C, known as an antimitotic agent, have been used to have high effectiveness in eliminating fibroblasts during Schwann cell culture period. This enrichment effect is also known to be cummulative with each successive pulse of Ara-C applied and is due to a progressive loss of fibroblasts. But the cytotoxicity by Ara-C is also cummulative and noticeable over the period. To determine the most effective application time and interval of Ara-C in the Schwann cell culture, we observed the Schwann cell purity and density with the Ara-C treatment in plain and three-dimensional culture from dorsal root ganglion of new born rat. By culturing dispersed dorsal root ganglia, we can repeatedly generate homogenous Schwann cells, and cellular morphology and cell count with mean percentages were evaluated in the plain culture dishes and in the immunostainings of S-100 and GFAP in the three-dimensional culture. The Ara-C treated cultures showed a higher Schwann cell percentage ($31.0%{\pm}8.09%$ in P4 group to $65.5%{\pm}24.08%$ in P2 group), compared with that obtained in the abscence of Ara-C ($17.6%{\pm}6.03%$) in the plain culture after 2 weeks. And in the three-dimensional culture, S-100 positive cells increased to $56.22%{\pm}0.67%$ and GFAP positive cells to $66.46%{\pm}1.83%$ in G2 group (p<0.05), higher yield than other groups with Ara-C application. Therefore, we concluded that the Ara-C treatment is effective for the proliferation of Schwann cells contrast to the fibroblasts in vitro culture, and the first application after 24 hours from cell harvesting and subsequent 2 pulse treatment (P2 group in plain culture and G2 group in three-dimensional culture) was more effective than other application protocols.

• Korean Journal of Ecology and Environment
• /
• v.38 no.3 s.113
• /
• pp.393-402
• /
• 2005

The field scale experiment was performed to examine the effect of plant coverage on the constructed wetland performance and recommend the optimum development and management of macrophyte communities. Four sets (each set of 0.88 ha) of wetland (0.8 ha) and pond (0.08 ha) systems were used. Water flowing into the Seokmoon estuarine reservoir from the Dangjin stream was pumped into wetland system. Water depth was maintained at 0.3 ${\sim}$ 0.5 m and hydraulic retention time was managed to about 2 ${\sim}$ 5 days; emergent plants were allowed to grow in the wetlands. After three growing seasons of the construction of wetlands, plant coverage was about 90%, even with no plantation, from bare soil surfaces at the initial stage. During the start up period of constructed wetlands, lower water levels should be maintained to avoid flooding newly plants, if wetland plants are to be started from germinating seeds. Effluent T-N concentration in low plant coverage wetland was higher in winter than high plant coverage wetland, whereas no T-P effluent concentration and removal efficiency difference was observed within 15% plant coverage. Dead vegetation affected nitrogen removal during winter because it is a source of organic carbon which is an essential parameter in denitrification. Biomass harvesting is not a realistic management option for most constructed wetland systems because it could only slightly increase the removal rate and provide a minor nitrogen removal pathway due to lack of organic carbon.

• Journal of Korean Society of Forest Science
• /
• v.83 no.3
• /
• pp.322-330
• /
• 1994

The Universal Soil Loss Equation (USLE) has been widely used to predict long-term soil loss by incorporating several erosion factors, such as rainfall, soil, topography, and vegetation. This study is aimed to introduce the LISLE within geographic information system(GIS) environment. The Kwangneung Experimental Forest located in Kyongki Province was selected for the study area. Initially, twelve years of hourly rainfall records that were collected from 1982 to 1993 were processed to obtain the rainfall factor(R) value for the LISLE calculation. Soil survey map and topographic map of the study area were digitized and subsequent input values(K, L, S factors) were derived. The cover type and management factor (C) values were obtained from the classification of Landsat Thematic Mapper(CM) satellite imagery. All these input values were geographically registered over a common map coordinate with $25{\times}25m^2$ ground resolution. The USLE was calculated for every grid location by selecting necessary input values from the digital base maps. Once the LISLE was calculated, the resultant soil loss values(A) were represented by both numerical values and map format. Using GIS to run the LISLE, it is possible to pent out the exact locations where soil loss potential is high. In addition, this approach can be a very effective tool to monitor possible soil loss hazard under the situations of forest changes, such as conversion of forest lands to other uses, forest road construction, timber harvesting, and forest damages caused by fire, insect, and diseases.

• Journal of Korean Society of Forest Science
• /
• v.96 no.6
• /
• pp.724-729
• /
• 2007

Due to the low productivity in timber harvesting, economic values of forest resources have been rarely validated in Korea. Since the Korea Forest Service provided a statistic of the timber assets for the survey of the 4th National Accounting (1998), no more statistics or measurements have been provided. Further, it becomes an issue that there is no clear standard to classify timber assets into produced or non-produced assets. In this research, we intended to provide a reasonable standard that enables one to classify timber assets either in produced or non-produced assets. For this purpose, articles in the '1993 System of National Accounts (SNA)', which presented definitions and scopes of biological assets, were scanned. The articles related to timber assets in the Korean version of SNA were compared with those in the original version of SNA that were proposed by UN. The results show that the Korean version of SNA seems to have much emphasis on natural occurrence or plantation for the classification standard, while its original version rather focus on the existence of direct control, responsibility, and management by institutional units. According to the original version of SNA, naturally occurring assets, which were basically classified into non-produced assets, were treated as being cultivated and classified into the produced asset when they (or their growth) were under the direct control, responsibility, and management of institutional units. Therefore, a guidance was presented to renew the Korean version of SNA and to innovate the classification standards for timber assets.