• Korean Journal of Plant Resources
• /
• v.31 no.4
• /
• pp.355-362
• /
• 2018

This study was performed to develop the mass propagation system using tissue culture technique to supply the seeds of Elephant garlic (Allium ampeloprasum L.) which has difficulty in propagation. Immature spathe of Elephant garlic was cultured on Murashige & Skoog (MS) medium supplemented with two plant growth regulators, naphthaleneacetic acid (NAA) and kinetin. After 6 weeks of culture, the highest number of shoot (14.9/explant) was obtained when the immature spathe with 10 cm length was cultured right after harvesting. In MS medium supplemented with 2 mg/L kinetin and 0.5 mg/L NAA, the most vigorous growth characteristics was observed, the shoot number was 14.9/explant, its length was 11.3 cm, and its fresh weight was 2.5 g. When the bulblets were cultured in MS medium with 2 mg/L kinetin and 0.5 mg/L NAA, the addition of 30 mg/L adenine improved their proliferation and growth significantly, the highest bulblet formation rate (48%) was obtained. The addition of 7% sucrose also increased the bulblet formation rate at the highest frequency of 98.2%. The shoots were shown be more vigorously proliferated at the secondary subculture stage rather than primary culture stage, their propagation rate was 80% after subculture.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.857-862
• /
• 2021

Recently, rapid climate change has had a significant impact on the bee ecosystem. The decrease in the number of bees and the change in the flowering period have a huge impact on the harvesting of beekeepers. Accordingly, attention is focused on smart beekeeping, which introduces IoT technology to beekeeping. According to the characteristics of beekeeping, it is impossible to continuously observe the beehive in the hive with the naked eye, and the condition of the hive is mostly dependent on knowledge from experience. Although a system that can measure partly through sensors such as temperature/humidity change inside the hive and measurement of the amount of CO2 is applied, there is no research on measuring the movement path and amount of movement of bees inside the beehive. Part of the migration of honeybees inside the hive can provide basic information to predict the most important cleavage time in beekeeping. In this study, we propose a device that detects the movement path of bees and measures and records data entering and exiting the hive in real time. The device proposed in this study was developed according to the honeycomb standard of the existing beehive so that beekeeping farms could use it. The development method used a photodetector that can detect the movement of bees to configure 16 movement paths and to detect the movement of bees in real time. If the measured honeybee movement status is utilized, the problem of directly observing the colony with the naked eye in order not to miss the swarming time can be solved.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.719-729
• /
• 2017

Recently, the field of agriculture has been gaining a new leap with the integration of ICT technology in agriculture. In particular, smart farms, which incorporate the Internet of Things (IoT) technology in agriculture, are in the spotlight. Smart farm technology collects and analyzes information such as temperature and humidity of the environment where crops are cultivated in real time using sensors to automatically control the devices necessary for harvesting crops in the control device, Environment. Although smart farm technology is paying attention as if it can solve everything, most of the research focuses only on increasing crop yields. This paper focuses on the development of a system architecture that can harvest high quality crops at the optimum stage rather than increase crop yields. In this paper, we have developed an architecture using apple trees as a sample and used the color information and weight information to predict the harvest time of apple trees. The simple board that collects color information and weight information and transmits it to the server side uses Arduino and adopts model-driven development (MDD) as development methodology. We have developed an architecture to provide services to PC users in the form of Web and to provide Smart Phone users with services in the form of hybrid apps. We also developed an architecture that uses beacon technology to provide orchestration information to users in real time.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.431-438
• /
• 2014

This study was conducted to assess forest biomass resource which is a carbon sink and a renewable resource in Korea. The total forest biomass resource potential was 804 million tons, and conifers, broadleaved forest and mixed forest accounted for 265 million tons, 282 million tons, and 257 million tons, respectively. Proportionately to regional forest stocks, biomass potential of Gangwon-do had most biomass potential, followed by Gyeongsangbuk-do and Gyeongsangnam-do. The woody biomass from the byproduct of sawn timber in commercial harvesting was 707 thousand ton/year, and that from the byproduct of forest tending was 592 thousand ton/year. The amount resulted in about 1,300 thousand ton/year of potential supplies from forest biomass resource into the energy market. It's tonnage of oil equivalent(toe) was 585 thousand ton/year. In this study, we developed a program (BiomassMap V2.0) for forest biomass resource mapping. Used system to develop this program was Microsoft Office Excel, Microsoft Office Access ArcGIS and Microsoft Visual Basic 6.0. Additionally, This program made use of tool such as ESRI MapObjects2.1 in order to take advantage of spatial information. This program shows the map of total biomass stock, annual biomass growth at forest land in Korea, and biomass production from forest tending and commercial harvesting. The information can also be managed by the program. The biomass resource map can be identified by regional and forest type for the purpose of utilization. So, we expect the map and program to be very useful for forest managers in the near future.

• Journal of Animal Science and Technology
• /
• v.44 no.2
• /
• pp.251-260
• /
• 2002

The corn (Zea mays L) planting date in a double-cropping system is delayed until mid-May due to delayed rye harvest on May. This experiment was conducted to determine the optimum harvesting time for high yield and the best quality of silage corn at late planting date after harvesting winter rye. Corns were planted on 21 May and harvested at eight different maturity stage at Seoul National University Experimental Livestock Farm, Suwon in 1997. Maturities were B (blister; 16 days after silking), M (milk; 20 days), LM (late milk; 24 days), SD (soft dough; 28 days), ED (early dent; 33 days), FD (full dent; 38 days), LD (late dent; 44 days) and PM (physiological maturity; 53 days) stages. The percentage of whole plant dry matter (DM) showed optimum range for silage making (29.0 to 38.5%) when corn plant was harvested at between ED and LD stages. Maximum whole plant DM (14,831 kg/ha) and total digestible nutrients (TDN) yields (10,675 kg/ha) reached at full dent stage. The percentage of whole plant acid detergent fiber (ADF) was decreased from 35.4 to 22.1%, and that of neutral detergent fiber (NDF) was also decreased from 63.8 to 46.0% as harvest stage progressed. These changes in chemical compositions were associated with changes in plant part composition. A progressive increase in total ear, and the decrease in stover portion in the plant were observed with advance in harvest stage. Calculated on net energy for lactation (NEL) and TDN values based on ADF percentage of stover plant decreased by ED stage and then increased by PM stage. But NEL and TDN values of ear and whole plant increased as harvest stage progressed. While in vitro dry matter digestibility of stover was decreased from 61.1 to 49.7%, whole plant was increased from 58.3 to 65.7% as maturity advanced (P$<$0.05). The results of this study indicate that corn can be harvested for silage at full (1/2 milkline) and late dent (2/3 milkline) stages for maximum yield and optimum quality at late planting. And days after silking at late planting was 38 and 44 days.

• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.19-29
• /
• 1999

This experiment was conducted to compare with the growth and fruit quality of Citrullus lanatus cv. Mudeungsan and Citrullus vulgaris cv. Dalgona grown in fertigation and soilless culture. Seeds were sown on April 16 and transplanted on April 24, 1998. Cultural systems used in fertigation and soilless culture beds using mixed substrate, coir dust (50%) and perlite (50%). In the plot of fertigation system, the number of leaves of cv. Dalgona were increased more than that of cv Mudeungsan, but leaf area shown inversed trend. Plant growth shown greater in soilless culture than those of fertigation culture. In regardless of cultural systems, soluble solid content in fruit was higher in the cv. Dalgona than that of cv. Mudeungsan, but fruit fresh weight was greater in cv. Mudeungsan compare to the cv Dalgona. Nitrate content in petiole sap of watermelon in regardless of cultivars and cultural systems was 11.4∼13.4mg/gFW on 15 days after transplanting, and then increased to 17.1∼20.6mg/gFW on the fruit growth stage. Phosphorous content was 3.7∼5.7mg/gFW in the early growth stage while decreased to 0.6∼1.1mg/gFW from maturing stage to harvesting stage. Potassium content was increased to 5.8∼6.6mg/gFW in the early growth stage while decreased to 4.0∼4.8mg/gFW from pollination stage to harvesting stage. Calcium content in spa petiole of watermelon was higher in soilless culture as 3.4∼4.1mg/gFW than 2.5∼3.5mg/gFW of fertigation culture, but calcium content in fertigation culture during maturing stage was higher than that of soilless culture. The tendency of magnesium uptake was higher in fertigation culture than that of soilless culture, and was similarly absorbed in the range of 0.9∼1.3mg/gFW in regardless of cultural method after pollination. It was demonstrated that cv. Mudeungsan can be adapted to soilless culture and improved the fruit quality. Consequently, hydroponic possibility for year round culture in the greenhouse was recognized.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.2
• /
• pp.191-197
• /
• 2005

Green house soils have been intensively cultivated with excessive application of compost and chemical fertilizer for vegetable growth. The objective of this study was to establish the reasonable fertilizer application system for rice cultivation in green house soil. Field experiment was carried out with rice cv. Geumo-byeo 1 in Jisan series soil (fine loamy, mixed, mesic family of Fluventic Haplaquepts) that was previously cropped with green pepper (Capsicum annuum L.) for the last 3 years. Treatment consisted of conventional fertilization $(N-P_2O_5-K_2O=11-4.5-5.7kg\;10a^{-1})$, no basal fertilization, 50% reduction of basal fertilization no top dressing, bulk blending fertilizer, and no fertilizer. The value of pH, available phosphate, and exchangeable potassium after experiment was lower than those before experiment while organic matter content was not difference in all treatment. The value of salt elusion was the highest in no basal fertilization plot. The amount of $NH_4-N$ in soil was higher in growth stage of rice as fertilizer amount increased in 1998. The changes of plant height and tiller were higher as fertilizer amount increased. Thousand-grain weight as yield component was higher in no basal fertilization plot all the year because of decreasing panicle. There was no significant difference in rice yield between treatments in 1998. However, conventional fertilization resulted in significantly increased rice yield in 1999. Nitrogen use efficiency was the highest in no basal fertilization plot in 1998 and in conventional fertilization plot in 1998. Our results suggest that no basal fertilization be best to increase salt elusion with slightly increased yield in first year for rice cropping after vegetable harvesting, which method improves fertilization efficiency. However, conventional fertilization was good for second rice cropping after vegetable harvesting in greenhouse.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.2
• /
• pp.190-204
• /
• 2018

The probability of safe cropping and the major phenological stages in rice were assessed using daily mean temperature data from 1981 to 2016 at 27 sites in North Korea. The threshold temperatures for early marginal transplanting date (EMTD), marginal harvesting date (MHVD), safe marginal heading date (SMHD), and cumulative temperature-based heading date (CTHD) were set to be $14^{\circ}C$, $13^{\circ}C$, $22^{\circ}C$ for 40 days after heading, and cumulative temperature of $1200^{\circ}C$ to MHVD, respectively. The safe heading date (SHD) was assumed to be either SMHD or CTHD whichever was earlier. It was also assumed that the minimum requirement for the suitability of safe rice cropping was met when both SMHD and CTHD appeared along with the time period of 60 days or more from EMTD to SHD. It was analyzed that 17 sites (Kaesong, Haeju, Yongyon, Singye, Sariwon, Nampo, Pyongyang, Anju, Kusong, Sinuiju, Changjon, Wonsan, Hamhung, Pyonggang, Huichon, Supung, Kanggye) had 90% or higher probability, two sites (Yangdok, Sinpo) had 80-90% probability, and eight sites (Kimchaek, Chunggang, Chongjin, Sonbong, Changjin, Pungsan, Hyesan, Samjiyon) had less than 80% probability of the safe rice cropping. For each region, the representative EMTD, SHD, and MHVD were analyzed using the 80 percentile of total years tested. The ranges for EMTD, SHD, and MHVD were May 4 in Sariwon~May 24 in Sinpo, June 21 in Kanggye~August 11 in Haeju, and September 17 in Kanggye~October 16 in Haeju and Changjon, respectively. Time durations from EMTD to SHD and from SHD to MHVD were 67~97 days and 57~72 days, respectively, depending on the regions. This study would facilitate modeling efforts for rice yield simulation in future studies. Our results would also provide basic information for practical researches on the rice cropping system in North Korea.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.181-186
• /
• 1998

In order to obtain high-level production of recombinant human thrombopoietin (rhTPO) in insect cell line, HTI-TN-5B1-4 (TN5), conditions for optimal rhTPO expression such as multiplicity of infection (MOI), the cell density at infection, harvesting time and type of culture method as well as growth media were determined. When TN5 cells were cultured as anchorage-dependent state in 60-mm dish, cell density $2\times^6$ cells,MOI of 10 and Garvesting the culture media at 72 hr post-infection wrere the cinditions for highest rh TPO production. High production of rhTPO was also achieved by using EXPRESS FIVE serum free media rather than SF900II serum free media-1. Anchorage-dependent TN5 cells were adapted as a suspension culture when they were grown in the presence of heparin. TN5 cells were successfully cultured at 0.2 L scale in suspension culture without having aggregation. When TN5 cells were cultured as suspension state, cell density of $0.6\times10^6$ cells/mL, MOI of 1 and harvesting the culture media at 72 hr post-infection, gave the highest yield of rhTPO.

• Journal of Korean Society of Forest Science
• /
• v.103 no.1
• /
• pp.87-97
• /
• 2014

This study was conducted to provide field-based harvesting study information which can be used to select an optimal cable system for certain work conditions on steep grounds (> $20^{\circ}$ ground slope) in Korea. To accomplish this study objectives, we evaluated three cable yarding systems (RME-300T tower-yarder, Chuncheon tower-yarder, FARMI tractor winch) working in typical work conditions for their yarding productivity and operational efficiency. Those yarders are commonly used for removing logs or trees on steep grounds in Korea. Under the same work conditions (average DBH of tree to be cut, 20 cm; yarding distance, 60 m; lateral yarding distance, 10 m; and machine utilization rate, 70%), the average productivities were $33.04m^3$/day, $38.47m^3$/day, and $14.17m^3$/day for RME-300T, Chuncheon tower-yarder, and FARMI, respectively. Our standardized cost comparison study also showed that the yarding cost was highest at $37,835won/m^3$ with FARMI, followed by RME-300T at $25,105won/m^3$ for the same work conditions. We found the lowest yarding cost with the Chuncheon tower-yarder at $20,520won/m^3$ which was resulted primarily from high yarding productivity at the yarding distance (60 m). Our analysis suggested that a small machine such as FARMI could be a low-cost yarding machine option for a cable yarding job with a short yarding distance (40 m or less). The Chuncheon tower-yarder is well suited for a mid-range yarding distance job in Korea, ranged between 40 to 140 m. If yarding distance were longer than 140 m, the RME-300T tower yarder appears to be most cost-effective.