• Journal of the Society of Naval Architects of Korea
• /
• v.60 no.5
• /
• pp.375-387
• /
• 2023

The subsea power cables are increasingly important for harvesting renewable energies as we develop offshore wind farms located at a long distance from shore. Particularly, the continuous flexural motion of inter-array dynamic power cable of floating offshore wind turbine causes tremendous fatigue damages on the cable. As the subsea power cable consists of the helical structures with various components unlike a mooring line and a steel pipe riser, the fatigue analysis of the cables should be performed using special procedures that consider stick/slip phenomenon. This phenomenon occurs between inner helically wound components when they are tensioned or compressed by environmental loads and the floater motions. In particular, Vortex-induced vibration (VIV) can be generated by currents and have significant impacts on the fatigue life of the cable. In this study, the procedure for VIV fatigue analysis of the dynamic power cable has been established. Additionally, the respective roles of programs employed and required inputs and outputs are explained in detail. Demonstrations of case studies are provided under severely sheared currents to investigate the influences on amplitude variations of dynamic power cables caused by the excitation of high mode numbers. Finally, sensitivity studies have been performed to compare dynamic cable design parameters, specifically, structural damping ratio, higher order harmonics, and lift coefficients tables. In the future, one of the fundamental assumptions to assess the VIV response will be examined in detail, namely a narrow-banded Gaussian process derived from the VIV amplitudes. Although this approach is consistent with current industry standards, the level of consistency and the potential errors between the Gaussian process and the fatigue damage generated from deterministic time-domain results are to be confirmed to verify VIV fatigue analysis procedure for slender marine structures.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.66-69
• /
• 2002

Zinc chlorin 1 possessing tertiary 3$^1$_hydroxy and 13$^1$-oxo groups was synthesized as a model for the antenna chlorophylls of photosynthetic green bacteria. Self-aggregation of 1 in nonpolar organic solvents was examined and compared to 2 and 3 possessing a secondary and primary 3$^1$_hydroxy group, respectively. Zinc chlorin 1 self-aggregated in I％(v/v) CH$_2$Cl$_2$-hexane to form oligomers and showed a red-shifted Qy maximum at 704 nm compared to the monomer (648 nm in CH$_2$CI2$_2$). This red-shift is larger than that of 3$^1$S-2 (648 to 697 nm) and comparable to that of3$^1$R-2 (648 to 705 nm), but smaller than that of 1 (648 to 740 nm), indicating that while a single 3$^1$-methyl group (primary to secondary OH) suppressed tight and/or extended aggregation, the additional 3$^1$-methyl group (secondary to tertiary OH) did not further suppress aggregation. The relative stability of the aggregates was in the order 3> 3$^1$R-2∼ 1 > 3$^1$S-2 as determined by visible spectral analyses. Molecular modeling calculations on oligomers of zinc chlorins 1, 3$^1$ R-2 and 3 gave similar well-ordered energy-minimized structures, while 3 stacked more tightly than 3$^1$ R- 2 and 1. In contrast, 3$^1$S-2 gave a relatively disordered (twisted) structure. The calculated oligomeric structures could explain the visible spectral data of 1-3 in nonpolar organic solvents. Moreover, self- aggregation of synthetic zinc 13$^1$_oxo-hlorins 4-6 possessing a 2-hydroxyethyl, 3-hydroxypropyl and 3- hydroxy-I-propenyl group at the 3-position in nonpolar organic solvents was discussed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.2
• /
• pp.85-91
• /
• 2014

Ground-based polarimetric scatterometers have been effective tools to monitor the growth of crop with multi-polarization and frequencies and various incident angles. An important advantage of these systems that can be exploited is temporal observation of a specific crop target. Polarimetric backscatter data at L-, C- and X-bands were acquired every 10 minutes. We analyzed the relationships between L-, C- and X-band signatures, biophysical measurements over the whole corn growth period. The Vertical transmit and Vertical receive polarization (VV) backscattering coefficients for all bands were greater than those of the Horizontal transmit and Horizontal receive polarization (HH) until early-July, and then thereafter HH-polarization was greater than VV-polarization or Horizontal transmit and Vertical receive polarization (HV) until the harvesting stage (Day Of Year, DOY 240). The results of correlation analysis between the backscattering coefficients for all bands and corn growth data showed that L-band HH-polarization (L-HH) was the most suited for monitoring the fresh weight ($r=0.95^{***}$), dry weight ($r=0.95^{***}$), leaf area index ($r=0.86^{**}$), and vegetation water content ($r=0.93^{***}$). Retrieval equations were developed for estimating corn growth parameters using L-HH. The results indicated that L-HH could be used for estimating the vegetation biophysical parameters considered here with high accuracy. Those results can be useful in determining frequency and polarization of satellite Synthetic Aperture Radar stem and in designing a future ground-based microwave system for a long-term monitoring of corn.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.440-440
• /
• 2012

Nanomaterials have emerged as new building blocks to construct light energy harvesting assemblies. Size dependent properties provide the basis for developing new and effective systems with semiconductor nanoparticles, quantized charging effects in metal nanoparticle or their combinations in 2 and 3 dimensions for expanding the possibility of developing new strategies for photovoltaic system. As top-down approach, we developed a simple and effective method for the large scale formation of self-assembled Cu(In,Ga)$Se_2$ (CIGS) nanostructures by ion beam irradiation. The compositional changes and morphological evolution were observed as a function of the irradiation time. As the ion irradiation time increased, the nano-dots were transformed into a nano-ridge structure due to the difference in the sputtering yields and diffusion rates of each element and the competition between sputtering and diffusion processes during irradiation. As bottom-up approach, we developed the growth of CIGS nanowires using thermal-chemical vapor deposition (CVD) method. Vapor-phase synthesis is probably the most extensively explored approach to the formation of 1D nanostructures such as whiskers, nanorods, and nanowires. However, unlike binary or ternary chalcogenides, the synthesis of quaternary CIGS nanostructures is challenging because of the difficulty in controlling the stoichiometry and phase structure. We introduced a method for synthesis of the single crystalline CIGS nanowires in the form of chalcopyrite using thermal-CVD without catalyst. It was confirmed that the CIGS nanowires are epitaxially grown on a sapphire substrate, having a length ranged from 3 to 100 micrometers and a diameter from 30 to 500 nm.

• Korean Journal of Agricultural Science
• /
• v.45 no.1
• /
• pp.43-49
• /
• 2018

The species of forage crops used in this study were Italian ryegrass (cv. Kowenery), sorghum (cv. SX17), proso millet (cv. domestic) and Japanese millet (cv. Jeju). The plant height of the summer crops was the highest at the dough stage. The dry matter yield of Italian ryegrass was 902.7 kg per 10 a. The dry matter yield of the winter crop and sorghum was 11,985 kg when harvested at the dough stage rather than at the first and second harvests. The proso and Japanese millet also had higher yields for dry matter during the dough stage rather than during heading and regeneration. The acid detergent fiber (ADF) content of Sorghum was lower than that of the first and second harvest; however, the proso and Japanese millet had a higher ADF content at the dough stage. The neutral detergent fiber (NDF) content was higher at the dough stage than at the first and second harvest, and the crude protein content was also lower at the dough stage than at the first and second harvest. The crude protein production for the dry matter yield was about 84 kg in Sorghum when harvested at the dough stage. Proso millet showed no difference for the crude protein production at the heading and dough stage while the Japanese millet had a higher crude protein production. There were no differences in the total digestible nutrients (TDN) content for the three crops according to the harvesting time. Therefore, if Sorghum and Proso and Japanese millet are to be combined with Italian ryegrass, it is better to harvest them at the dough stage.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.361.1-361.1
• /
• 2016

Due to their high sensitivity, fast response, small energy consumption and ease of integration, nanoelectromechanical systems (NEMS) have attracted much interest in various applications such as high speed memory devices, energy harvesting devices, frequency tunable RF receivers, and ultra sensitive mass sensors. Since the device performance of NEMS is closely related with the mechanical and flexural properties of the material in NEMS, analysis of the mechanical and flexural properties such as intrinsic tensile stress and Young's modulus is a crucial factor for designing the NEMS structures. In the present work, the intrinsic mechanical properties of highly stressed silicon nitride (SiN) beams are investigated as a function of the beam length using two different techniques: (i) dynamic flexural measurement using optical interferometry and (ii) quasi-static flexural measurement using atomic force microscopy. The reliability of the results is analysed by comparing the results from the two different measurement techniques. In addition, the mass density, Young's modulus and internal stress of the SiN beams are estimated by combining the techniques, and the prospect of SiN based NEMS for application in high sensitive mass sensors is discussed.

• Journal of the Korean Solar Energy Society
• /
• v.36 no.6
• /
• pp.37-46
• /
• 2016

In this study, long-term global illuminance data for 19 selected cities are calculated from modeled solar radiation data, AEER's TMY2. Perez model in Daysim daylight simulation tool is used for the solar radiation to illuminance conversion. And then, daylight availability in an unit office space is evaluated for the 19 cities. For this evaluation, various daylight performance indices are reviewed since static daylight performance index such as daylight factor (DF) and annual average global illuminance value is not suitable for actual performance evaluation in terms of visual comfort and light energy saving of a space. This study evaluated daylighting performance of prototypical office space module by introducing DA (daylight autonomy) and UDI (Useful Daylight Illuminance) index for major cities of Korea. Result shows that there is upto 18% of illuminance level difference with annual average global illuminance data, but if we consider useful daylight in a space the illuminance level difference among the cities are only within 5%. This means that for sustainable building design especially in daylight design, amount of annual global illuminance is not important factor even in cloudy cities. Daylight design and daylight harvesting system would return similar energy saving impact regardless of building location.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.6
• /
• pp.623-628
• /
• 2010

This paper presents a wind-power-driven portable power source based on piezoelectric effect. Positive piezoelectric effect is one of efficient and widely used mechanisms for converting mechanical energy to electrical energy. However, for this mechanism, a periodic mechanical stress with a high frequency, as in the case of AC, has to be exerted; such stress cannot be exerted by the natural wind in the environment. The natural wind has a constant velocity with slow and irregular variations, as in the case of DC. In this paper, we propose a novel and simple mechanism to convert mechanical energy into electrical energy. The DC-like wind flow is passed through a propeller to convert it to an AC-like wind flow; the resultant AC-like periodic flow induces vibrations in a piezoelectric cantilever, thereby, generating electrical power. This system is expected to be one of practical solutions for wireless energy supply to ubiquitous sensor networks (USNs).

• Journal of Korean Foot and Ankle Society
• /
• v.16 no.2
• /
• pp.87-93
• /
• 2012

Fractures located at the metaphyseal/diaphyseal junction at the base of the fifth metatarsal were first described by Sir Robert Jones in 1902. However, ever since, there has been disagreement and debate regarding the diagnosis, classification, pathomechanics, the incidences, and potential causes of delayed unions and nonunions, and the optimal method of treatment. It appears to be widely agreed that proximal fractures of the metaphyseal/diaphyseal region of the fifth metatarsal are prone to delayed union or even nonunion. Several classifications of proximal fifth metatarsal stress fractures have been devised. Torg et al. classified fractures involving the proximal part of the diaphysis of the fifth metatarsal into three types. The Torg classification is a good grading system that can be used to determine the type of surgery needed as well as for the prediction of prognosis. The ''plantar gap'' might add to the decision-making process for surgery and improve the prediction of patient prognosis. In addition, the new classification using 'plantar gap' might be used for classification of fifth metatarsal stress fracture. Fifth metatarsal stress fractures can be treated conservatively or surgically, and excellent results have been reported for surgery with rapid recovery in athletes. Intramedullary screw fixation has become a popular form of fixation for fifth metatarsal stress fractures. Bone grafting presents the problems of a longer recovery time and additional skin incision for harvesting. The modified tension band wiring is an useful and simple option for surgical treatment of challenging fifth metatarsal stress fractures.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.201-210
• /
• 1992

This study was designed to investigate the content of inorganic nitrogen($NH_4$, $NO_3$) and its change in the 7 different sites; the permanent meadows of alfalfa, orchardgrass, and reed canarygrass, the fields of rye. corn, rice and a mountain region. the results from this study were summarized as follows; 1. The contents of ammonium and nitrate in meadows were 15.89-16.46 and 1.32-1.86ppm, respectively, showing the lower level than in other sites and no significant diffirences among three meadows. 2. In the rice field, the average content of ammonium(7.19ppm) was the highest among all sites, but the content of nitrate(1 l.l7ppm) was the lowest. In addition, almost all of nitrate were spreaded around the surface. 3. In the mountain region, the content of $NH_4$(5.79ppm) was slightly high, but the content of nitrate ( 15.18ppm) was very low. 4. In the rye field. the average content of $NO_3$ was 35.46ppm and show the highest (92.63ppm) at the deep part of soil in the specific season, but it decreased with increasing temperature. 5. In the corn field, which kept bare after harvesting the corn silage, the content of $NO_3$ was high, regardless of seasons and depths, and increased up to maximum of 103ppm. 6. The ground water concentrations of $NO_3$ were not more than 50ppm in the pasture. In the vegetable house, they were less than 30 ppm during the winter and spring and were 80-100ppm during the summer and fall. 7. The concentrations of $NO_3$ in Han river water were lower during the winter and spring(20-30ppm) and higher dxring the summer and fall (50-90ppm).