• Journal of Biosystems Engineering
• /
• v.21 no.2
• /
• pp.182-190
• /
• 1996

A macerating technique which can apply to the mechanical production system of the agricultural by-product was developed to increase the utilization of agricultural waste and solve the shortage problem in the forage supply for the livestock production. The macerating method is to shred the agricultural by-product by the two rolls which rotate at different speeds each other. The testing macerator was built and the optimum operating conditions are suggested. Results of this research are as follows: 1. The increase of the base roll speed and speed ratio between two rolls shows the better shredding index but decrease the drying rate. The optimum conditions of the base roll speed and the speed ratio between two rolls for the rice straw are 1200 rpm and 1.7-2.0 respectively. 2. The macerated alfalfa was dried to the 15%(w.b.) within 3 hrs in a field at speed ratio of rolls, 2:1 and base roll speed, 1800rpm. 3. The milled surface and straight knurled surface for the macerating roll have same effect on the drying rate of material. Both rolls have self-cleaning functions during operation.

• Journal of Magnetics
• /
• v.18 no.4
• /
• pp.473-480
• /
• 2013

A new concept design of electromagnetic energy harvester is proposed for powering a tire pressure monitoring sensor (TPMS). The thin coil strap is attached on the circumferential surface of a rim and a permanent magnet is placed on the brake caliper system. When the wheel rotates, the relative motion between the magnet and the coil generates electrical energy by electromagnetic induction. The generated energy is stored in a storage unit (rechargeable battery, capacitor) and used for TPMS operation and wireless signal transmission. Innovative layered design of the strap is provided for maximizing energy generation. Finite Element Method (FEM) and experiment results on the proposed design are compared to validate the proposed design; further, the method for design improvement is discussed. The proposed design is excellent in terms of durability and sustainability because it utilizes the everlasting rotary motion throughout the vehicle life and does not require material deformation.

• Journal of Agricultural Extension & Community Development
• /
• v.3 no.1
• /
• pp.43-54
• /
• 1996

Citrus farming become one of highly potent area for the farmer s income in the Asia region. Because of its favorable taste and distinctive aroma, attractive color, and nutritional values, market demand has increased steadily along with the income increases in the region. However, realization of the potent have been constrained due to poor orchard management, frequent occurrences of pest and diseases, and a high cost in production besides of the market failures. Cutting down of production cost should be an operational goal to obtain mope profit where marketing structure has yet been underdeveloped. The objective of this study was to provide a comparative information to those program efforts of searching comparative advantage in production. For the three countries, reduction of labor cost by reduction of chemical application frequency was recommended while pursuing further mechanization in those operation such as in pruning, harvesting and pest control. Adoption of the IPM (integrated pest management) will be useful to reduce the number of spraying chemicals with changed knowledge and attitude of the farmers.

• Korean Journal of Bronchoesophagology
• /
• v.3 no.2
• /
• pp.327-331
• /
• 1997

One of the most difficult airway problems is a subglottic stenosis combined with a tracheal stenosis. Laryngotracheal stenosis has not been completely solved with classic methods like cricotracheal split with autogenous cartilage graft, thyrotracheal anastomosis, and free hyoid or hyoid-sternohyoid myo-osseous flap reconstruction. A 28-near-old male patient who had had laryngotracheal stenosis was successfully treated by laryngotracheal reconstruction using vascularized clavicle. This method has a several advantages: the vascularized clavicle harvesting in the same operative fields, one stage operation, less restenosis due to plentyful blood supply, md prevention of airway collapse due to a clavicle provided framework. It is too early to make a definite conclusion, but the authors suggested that this method could become one of the most effective methods of laryngotracheal stenosis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.6
• /
• pp.416-425
• /
• 2021

In the 4^th industrial age, electronic devices are becoming smaller and lighter with a low power consumption to overcome spatial limitation. The piezoelectric energy harvesters can convert mechanical kinetic energy into electric energy; thus, enabling the operation of small electronic devices. Recently, various piezoelectric harvesters have been reported and the electric output from these harvesters could be anticipated by theoretical analysis methods. For example, COMSOL Multiphysics software provides a theoretical simulation of piezoelectric effect with a combination of mechanical and electrical phenomena in the piezoelectric materials. This article introduces a brief modeling of piezoelectric harvester to investigate mechanical stress and electrical output of harvesting devices by the COMSOL Multiphysics software.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.34 no.5
• /
• pp.271-282
• /
• 2021

The internet of things (IoT) technology is a key component for the advent of 4^th industrial revolution, which is the network of home appliances, infrastructures, and vehicles to remotely investigate these systems. For the operation of compact IoT devices, batteries are widely used as electric power, and the limited lifetime of batteries inevitably leads to periodic replacement. Magneto-mechano-electric (MME) generators may be alternatives to batteries inside the IoT devices by converting stray magnetic field into electric energy, since we are always surrounded by ambient alternating current (AC) magnetic fields induced from electric power transmission lines everywhere. This article reviews the recent domestic research progress in high-performance MME generators and their application field for IoT and electronic devices.

• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.293-300
• /
• 2022

Flexible, wearable, and implantable electronic sensors have started to gain popularity in improving the quality of life of sick and healthy people, shifting the future paradigm with high sensitivity. However, conventional technologies with a limited lifespan occasionally limit their continued usage, resulting in a high cost. In addition, traditional battery technologies with a short lifespan frequently limit operation, resulting in a substantial challenge to their growth. Subsequently, utilizing human biomechanical energy is extensively preferred motion for biologically integrated, self-powered, functioning devices. Ideally suited for this purpose are piezoelectric energy harvesters. To convert mechanical energy into electrical energy, devices must be mechanically flexible and stretchable to implant or attach to the highly deformable tissues of the body. A systematic analysis of piezoelectric nanogenerators (PENGs) for personalized healthcare is provided in this article. This article briefly overviews PENGs as self-powered sensor devices for energy harvesting, sensing, physiological motion, and healthcare.

• Journal of Biosystems Engineering
• /
• v.3 no.1
• /
• pp.20-36
• /
• 1978

The effect of binder kicking forces on the shattering losses of paddy rice, which has been widely understood as an outstanding loss factor in harvesting with a binder, were experimentally assessed in this thesis.Through the field tests the optimum time of harvest, in terms of grain moisture contents, was found by considering harvesting losses for two rice varieties, harvested by two different binders, at four or five grain moisture levels.A device was designed and manufactured to apply various kicking forces to the bundles and was used in the bundle kicking tests. It was intended to find out the optimum range of kicking force to minimize the kicking losses. Based on the study, modification of the existing binder kicking mechanism was suggested. The following is a summary of the results of this thesis. 1. In Suweon 258 variety, as the grain moisture content is reduced, so the cutting loss and the kicking loss increase. The grain losses range from 0.77 to 0.82 percent of total field yield for the cutting loss, from 1.83 to 2.01 percent for the kicking loss, and from 2.60 to 2.83 percent for the field loss, when the moisture content is about 22 percent. 2. In Jinheung variety , the field losses increased as the grain moisture content decreased . When the moisture content was 20 percent, the field loss, cutting loss and kicking loss was 0.42-0.49 % , 0.30-0.35, and 0.12 -0.14% of the total field yield, respectively. 3. The difference in the field loss , cutting loss, and kicking loss for the two binders was 0.23% , 0.05% and 0.18% respectively in Suweon 258 variety, and 0.07% , 0.02% and 0.05% respectively ini Jinheung variety. The grain losses for binder B were slightly higher than those for binder A. 4. In the statistical analysis of each variety , the kicking force and the moisture content of the grain, and its interaction were all highly significant at 1% level by T test .The optimum kicking force was found to be in the 3.0-0.4kg range. This does not interrupt the binder operation, while ioses are kept to an acceptale level. 5. To reduce the kicking force of the eXlstmg binder mechanism, the speed of rotation of the kicking arm needs to be redued by increasing the number of driving sprocket teeth, and the position and gear ratio of the knotter-bill and driving bevelgear have to be change to give a !motter-bill speed of 1110 rpm. It is also desirable to attach a belt conveyor which smoothly carries the bundle to the ground. 6. The optimum harvesting time cased on maximum field yield was found to be at a grain moisture content of around 22 percent for Suweon 258 variety, and 20 percent for Jinheung variety. Tota] field yield and field yield at the time amounted to 9, 812.5 kg/ha, 9, 302. 5kg/ha respectively for the Suweon 258, and 7, 819.5 kg/ ha, 7, 158.7 kg/ha respectively for the Jinheung variety.

• Korean Journal of Medicinal Crop Science
• /
• v.5 no.4
• /
• pp.284-288
• /
• 1997

In order to study on suitable harvest time of adlay utilizing self-feeding combine harvester with four rows, which is originally designed for rice harvest, harvesting were carried out at four different times (40, 50, 60 and 70 days after anthesis) . For efficient operation, appropriate working rows were 2 rows at 50 days after anthesis and working speed was 0.26m/sec at 60 days after anthesis. Theoretical working capability was 11.23a/hr at 60 days after anthesis. As the harvesting was delayed, water content of adlay decreased. Water content of culm+leaf was $69.7{\sim}55.3%$ and water content of grain was 34.2% at 60 days after anthesis. The later adlay was harvested. the higher the percent of ripened grain was. But the immature grain was decreased. Remnants was less than 1.8% at 60 days after anthesis. The later adlay was harvested, the heavier volume weight was. Yield was the highest at 60 days after anthesis. When utilizing self-feeding combine harvester with four rows, which was originally designed for rice harvest, suitable harvesting time was 60 days after anthesis. Therefore, theoretically suitable harvest time was 68 days after anthesis.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.2
• /
• pp.48-60
• /
• 2023

Although foxtail and broomcorn millet have been cultivated since the Neolithic Age on the Korean Peninsula, there have been few studies on how the importance of millet cultivation changed over time. The discovery of millet has been rare in the Mahan-Baekje villages in the Jeonnam region, and archaeological discussions on ancient farming have centered around rice farming. However, a large amount of millet was found at the Osan site in Bongrim-ri, Jangheung, showing that the tradition of millet cultivation continued during the AD 3-4 centuries. In contrast to rice farming, which requires low-lying wetlands, hot and humid summers, and a large labor force, millet cultivation has few restrictions in terms of growing environment and labor mobilization. Regarding harvesting seasons, the crops at the Osan site can be divided into fall harvesting (rice, legumes, millet) and summer harvesting (wheat). Regarding field locations, the crops are divided into wetland crops (rice) and dryland crops (wheat, legumes, millet). The operation of the dual agricultural system contributed to subsistence resilience and agricultural production, making it possible to effectively manage social and climatic crises.