• 한국해양학회지:바다
• /
• 제26권1호
• /
• pp.11-36
• /
• 2021

비천문조인 연주조(Sa)와 반년주조(Ssa)는 해수특성 변화와 기상 상태에 영향을 받는 비대칭 월평균 해수면의 연변화와 관련이 깊다. 국립해양조사원이 운영하는 21개 조위관측소에서 관측한 1시간 간격의 19년(1999~2017년) 간 해수면 높이 자료에 대하여 두 종류의 조석 조화분해 프로그램(Task2K와 UTide)을 사용하여 Sa와 Ssa의 조화상수를 산출하였다. 조화분해에 사용되는 자료의 시작 시기와 길이에 따른 Sa의 안정도를 조사하였으며, Sa와 Ssa의 조화상수의 분포 특성을 살펴보았다. 먼저, 인천 조위관측소의 20년(1999~2018년) 해수면 관측자료를 1일씩 이동하면서 1년(369일) 조화분해를 수행하고 그 결과를 비교하였을 때, 두 프로그램 모두 자료의 시작 시기에 따라 Sa 조화상수가 불규칙하게 크게 변동한다는 사실을 알 수 있었다. Task2K가 Sa 분조 계산식에 근일점 천문변수를 고려하지 않아서, 두 프로그램 간에 약 78°의 지각 차가 났으며, 이들 진폭 차이는 1 cm 이하였다. 우리나라 연안에서는 Sa 조화상수가 해마다 크게 다르므로, 조위 예측 정확도와 관련하여 안정적인 조화상수 산출에 필요한 적절한 자료 길이를 결정하기 위해 관측자료 길이(1년, 2년, 3년, 5년, 9년, 19년)에 따른 인천 조위관측소의 Sa 조화상수 값의 변동성을 살펴보았다. 대표성 있는 Sa 조화상수를 구하기 위해서 조화분해를 수행할 때 5~9년 동안의 관측자료를 사용하면 조화상수 예측오차가 상당히 줄어들며, 19년 자료를 사용 것이 가장 바람직하다는 결론을 얻었다. Sa 분조의 진폭은 각 해역별로 다른 해양·대기 환경 특성에 의해 서해안에서 15.0~18.6 cm, 제주도를 포함한 남해안에서 10.7~17.5 cm이었으며, 울릉도를 포함한 동해안에서 10.5~13.0 cm이었다. 울릉도 등 동해 일부 해역을 제외하고 우리나라 연안에서 Ssa 분조의 영향으로 인해 연중 최고(최저) 해수면 높이가 발생하는 시기가 늦어(빨라)져서 해수면의 계절변화가 시간적으로 비대칭적인 특성을 보였다. 끝으로, 월평균 해수면, 대기압 보정 해수면, 비부피 높이 간 관계로부터 해수면의 해해변화와 계절변화의 비대칭성에 대기압 효과와 해수밀도가 가장 큰 영향을 끼친다는 사실을 확인하였다.

• 한국환경과학회지
• /
• 제9권1호
• /
• pp.19-25
• /
• 2000

As the tideland reclamation is done on a large scale these days, construction work is active in the coastal areas. Facilities in the coastal areas must be built with the tide characteristics taken into consideration. Thus the tide characteristics affect the overall reclamation plan. The analysis of the tide data boils down to a harmonic analysis of the hourly changes of long-term tide data and extraction of unharmonic coefficients from the results. Since considerable amount of tide data of the West Coast are available, the existing data can be collected and can be used to obtain the temporal changes of the tide by being fitted into the tide prediction model. The goal of this thesis lies in assessing whether the mean sea level used in the field agrees with the analysis results from the long-term observation data obtained with their homogeneity guaranteed. To achieve this goal, the research was conducted as follows. First the present conditions of the observation stations, the land level standard, and the sea level standard were analyzed to set up a time series model formula for representing them. To secure the homogeneity of the time series, each component was separated. Lastly the mean sea level used in the field was assessed based on the results obtained form the analysis of the time series.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.959-965
• /
• 2002

Effective hydraulic conductivity of a statistically anisotropic heterogeneous medium is obtained for steady two-dimensional flows employing stochastic analysis. Flow equations are solved up to second order and the effective conductivity is obtained in a semi-analytic form depending only on the spatial correlation function and the anisotropy ratio of the hydraulic conductivity field, hence becoming a true intrinsic property independent of the flow field. Results are obtained using a statistically anisotropic Gaussian correlation function where the anisotropy is defined as the ratio of integral scales normal and parallel to the mean flow direction. Second order results indicate that the effective conductivity of an anisotropic medium is greater than that of an isotropic one when the anisotropy ratio is less than one and vice versa. It is also found that the effective conductivity has upper and lower bounds of the arithmetic and the harmonic mean conductivities.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.283-289
• /
• 2009

In level set method, material properties are made to change smoothly across an interface of two materials with different properties by introducing an interpolation or smoothing scheme. So far, the weighted arithmetic mean (WAM) method has been exclusively adopted in level set method, without complete assessment for its validity. We showed here that the weighted harmonic mean (WHM) method for rate constants of various rate processes, including viscosity, thermal conductivity, electrical conductivity, and permittivity, gives much more accurate results than the WAM method. The selection of interpolation scheme is particularly important in multi-phase electrohydrodynamic problems in which driving force for fluid flow is electrical force exerted on the phase interface. Our analysis also showed that WHM method for both electrical conductivity and permittivity gives not only more accurate, but also more physically realistic distribution of electrical force at the interface. Our arguments are confirmed by numerical simulations of drop deformation under DC electric field.

• 대한수학회보
• /
• 제47권4호
• /
• pp.815-823
• /
• 2010

Let ${\tau}\;{\neq}\;\delta_0$ be either a power bounded radial measure with compact support on the unit disc D with $\tau(D)\;=\;1$ such that there is a $\delta$ > 0 so that ${\mid}\hat{\tau}(s){\mid}\;{\neq}\;1$ for every $s\;{\in}\;\Sigma(\delta)$ \ {0,1}, or just a radial probability measure on D. Here, we provide a decomposition of the set X = {$h\;{\in}\;L^{\infty}(D)\;{\mid}\;lim_{n{\rightarrow}{\infty}}\;h\;*\;\tau^n$ exists}. Let $\tau_1$, ..., $\tau_n$ be measures on D with above mentioned properties. Here, we prove that if $f\;{in}\;L^{\infty}(D^n)$ satisfies an invariant volume mean value property with respect to $\tau_1$, ..., $\tau_n$, then f is n-harmonic.

• International Journal of Control, Automation, and Systems
• /
• 제4권4호
• /
• pp.456-465
• /
• 2006

The problem of recursive filtering far linear discrete-time systems with uncertainties is considered. A new suboptimal filtering algorithm is herein proposed. It is based on the fusion formula, which represents an optimal mean-square linear combination of local Kalman estimates with weights depending on cross-covariances between local filtering errors. In contrast to the optimal weights, the suboptimal weights do not depend on current measurements, and thus the proposed algorithm can easily be implemented in real-time. High accuracy and efficiency of the suboptimal filtering algorithm are demonstrated on the following examples: damper harmonic oscillator motion and vehicle motion constrained to a plane.

• 대한의용생체공학회:의공학회지
• /
• 제9권1호
• /
• pp.101-108
• /
• 1988

In this paper the power spectrum of background EEG is estimated by the LMS PHD based on least mean square. At the power spectrum estimatiom, the stocastic process of background EEG is assumed to consist of the nonharmonic sinusoid and the white noise. In the LMS PHD the model parameters are obtained by the least mean square at optimal order which is obtained from the fact that the eigenvalue's fluctuation of autocorrelation matrix of the normal back-ground EEG is smaller at some order than at other order when the power spectrum of background EEG is esitmated by PHD. The optimal order of this model is the 6-th order when the eigenvalue's fluctuation of autocorrelation matrix of background EEG is considered. The estimation results are with compared the results from the Maximum Entropy Spectral Estimation and Pisarenko Harmonic Decomposition. From the comparison results. The LMS PHD is possible to estimate the power spectrum of background EEG.

• 한국해양학회지
• /
• 제19권1호
• /
• pp.31-35
• /
• 1984

15년간 (1961∼1975) 182정점에서 정기적으로 관측된 수산진흥원 자료를 조화 분석함으로써 한국주변해양 포면수온의 계절적 변화를 연구하였다. 서해 평균수온 은 동해에서보다 낮으나, 서해수온의 년교차는 동해에서보다 훨씬 크다. 한국주변해양의 최대표면수온은 8월중순부터 9월 초순 사이에 나타난다. 본 논문 에서는 한국주변해양 표면수온의 년변화에 대한 물리적 원인을 규명하고, 특히 태양복사 에너지 뿐만 아니라 해류와 기류에 의한 열의 이류가 표면수온에 미치는 영향을 고찰하였다.

• 동력기계공학회지
• /
• 제14권5호
• /
• pp.56-62
• /
• 2010

In this paper, a recurrent cerebellar modulation articulation control (RCMAC) has been developed for improvement of noise attenuation performance in active noise control system. For the narrow band noise, a filter-x least mean square (FXLMS) method has bee frequently employed as an algorithm for active noise control (ANC) and has a partial satisfactory noise attenuation performance. However, noise attenuation performance of an ANC system with FXLMS method is poor for broad band noise and nonlinear path since it has linear filtering structure. Thus, an ANC system using RCMAC is proposed to improve this problem. Some simulations in duct system using harmonic motor noise and KTX cabin noise as a noise source were executed. It is shown that satisfactory noise attenuation performance can be obtained.

• 한국의류학회지
• /
• 제15권4호
• /
• pp.431-435
• /
• 1991

The dispersion and Poiar force components of the surface free energy of PET fibers untreated and treated with hydrophilic chemicals, such as nonionic-soil release polymer (SRP), anionic, nonionic and hydrophilic silicone, were determined using harmonic-mean and geometric-mean methods. Contact angles of water and methylene iodide on the fibers were determined from the adhesion tensions using tensiometric method. Fibers treated with hydrophilic chemicals have the increased polar force component and the decreased dispersion force component. The adhesion tensions of triolein for the hydrophilic treated fibers were smaller than that for untreated fiber.