• 센서학회지
• /
• 제7권5호
• /
• pp.327-333
• /
• 1998

본 논문에서는 실내 환경에서의 환경 인자에 대한 사람의 감성을 측정하기 위한 감성 측정기를 개발하였다. 온도, 습도, $CO_2$ 및 $C_4H_{10}$ 농도를 측정할 수 있는 네가지 종류의 센서를 사용하였는데, 감성지수를 정의하기 위해서는 온도, 습도, $CO_2$ 센서만을 사용하였고, $C_4H_{10}$ 센서는 내부 공기의 유해도 측정을 위해 사용하였다. 제안한 측정기는 온도, 습도, $CO_2$ 농도 각각에 대해 따로 감성지수를 설정하고 이를 조합하여 현재 실내환경에 대한 최종 감성지수를 제시하도록 하였다. 제안된 알고리듬의 타당성을 PC 윈도우 95환경에서의 시뮬레이터를 이용하여 확인하였고, 마이크로 프로세서를 사용하여 독립적인 감성측정기를 제작하였다.

• 한국물환경학회지
• /
• 제34권2호
• /
• pp.210-215
• /
• 2018

It is difficult to count colonial cyanobacteria Microcystis cells since the thickness of colonies is constrained by amorphous mucilage, making it impossible to estimate the number of cells. Disaggregation of Microcystis colonies into single cell is needed to improve the accuracy and precision of cell density estimation of naturally collected samples. Uultrasonic treatment method is commonly used owing to the simplicity and immediacy of the procedure. However, amplitude, frequency, and duration of ultrasonic treatment also cause cell loss during the experiment. Optimal ultrasonic treatment has not been standardized yet. Therefore, the objective of this study was to investigate optimal ultrasonic treatment by analyzing cell density and colony numbers. We collected colonial Microcystis from Changnyeong-Haman weir area in Nakdong River during harmful algal boom period from September to October in 2017. Ultrasonic treatment method was applied to disrupt colonies into single cells to enumerate cell density. Among treatment conditions, results from continuously treated for 100 seconds were found to be the optimum to reduce colonies to a suspension of single cell without cell losses under high and low density of Microcystis cells. Lugol iodine fixed cells followed by sonication showed less negative impact of cell damage within the optimal treatment time (100 seconds). Furthermore, disaggregated cells treated by sonication enables microscopic observation more easily since gas vacuoles were collapsed to facilitate sedimentation of cells under the counting chamber for quantitative enumeration of buoyant Microcystis cells.

• 한국환경보건학회지
• /
• 제33권5호
• /
• pp.470-477
• /
• 2007

This research was conducted to evaluate the effect of moisture content on direct landfilling prohibition of organic sludge. Organic sludges with moisture content (Me) of 75 and 85% were filled in two lysimeters. The lysimeters were named as Exp.75 and Exp.85, respectively. LFG of 2,064 l was generated greatly for Exp.85, compared to 1,500 l for Exp.75. LFG generations in Exp.75 and Exp.85 were 64.1 l/kg and 157.1 l/kg as dry TS basis, and 113.6 l/kg and 266.2 l/kg as dry VS basis. Total $CH_4$ generation in LFG for Exp.85 was 1,238 l, while 1,050 l for Exp.75. $H_2S$ of $3{\sim}150$ ppmv was generated from Exp.85, which was 5 times higher than $2{\sim}30$ppmv from Exp.75. Leachate was not generated from Exp.75 during operation time. However, 420 ml of leachate was generated from Exp.85. From the results of gas generation, composition, odorous compounds, and leachate generation, landfilling of organic sludge with high MC was more harmful to the environment in spite of great LFG generation. However, direct landfilling of organic sludges without great difference of MC made a severe odor problem. Therefore, it was thought that current direct landfilling prohibition law for all organic sludge was appropriate.

• 한국환경과학회지
• /
• 제15권4호
• /
• pp.293-304
• /
• 2006

Sea water samples collected in August, 1994 from 20 stations in the Kwangyang Bay were analyzed by gas chromatography/mass spectrometry-selected ion monitoring (GC/MS-SIM) to investigate persistence and distribution pattern of four organophosphorus pesticides (DDVP, Diazinon, IBP, EDDP). Except for IBP, the contamination by DDVP, Diazinon, and EDDP in marine aquatic environment in Korea has not been reported previously. In this study, however, all these four pesticides were detected in all stations (except DDVP) and their concentrations were in ng/L level. The concentrations ranged from detection limit to 15.3ng/L for DDVP, 1.8-27.7ng/L for Diazinon, 7.3-63.5ng/L for IBP, and 22.2-1100.1ng/L for EDDP. It is noteworthy that the measured concentrations of IBP and EDDP in this study would be much lower than usual, since the use of IBP and EDDP was less than 50% of average annual consumption due to unusually dry and hot weather condition in the summer of 1994. It was very surprising to find that the highest concentrations of organophosphorus pesticides were observed at stations near Daesa Streamlet instead of Seomjin River, which has more point source of the pesticides. This result suggests that the small river discharge during heavy ram period in summer can give harmful effect on marine biota (both wild and aqua-cultured) with its organophosphorus pesticide residue, despite of their short residence time in aquatic environment. In order to protect the marine life properly from acute toxicity of the organophosphorus pesticides, it needs to be emphasized that monitoring the level of agricultural pesticides in river run-off should be done during active consumption period rather at regular intervals.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2009년도 정보 및 제어 심포지움 논문집
• /
• pp.347-349
• /
• 2009

Air quality of indoor space environment is affected by various pollutants like as particles and chemical stuffs. The indoor air pollution affects directly the human respiration organs to cause consequently unpleasant mental status. The $CO_2$ concentration level is one of the harmful components of air pollutants. Major factor to increase the $CO_2$ concentration level is the people's breath amount in indoor. The car exhaust gas diffused from the around road also has strong affect on $CO_2$ concentration. There are some other reasons to affect the $CO_2$ concentration change, such as, real-time change of the population movement, closeness to the indoor air flow inlet window and changes in road car traffic amount. A remote monitoring system to measure environmental indoor air pollution concerning on the $CO_2$ concentration was studied and installed realized set-up model. Zigbee network configuration was applied for this system and the $CO_2$ concentration data were collected through USN network. A software program was developed to assure systematic analysis and to display real-time data on web pages. For the experimental test various condition was set up, like as, window opening, stopping air condition operation and adjusting fan heater work, etc. The analysis result showed the relation of various environmental conditions to $CO_2$ concentration changes. The causes to increase $CO_2$ concentration were experimentally defined as windows closing, the stopping air condition system, fan heater operation. To keep the $CO_2$ concentration under the legally required ppm level in public access indoor space, the developed remote measurement system will be usefully applied.

• 마이크로전자및패키징학회지
• /
• 제17권2호
• /
• pp.1-9
• /
• 2010

본고에서는 청정 공정을 이용한 다이렉트 프린팅용 금속 및 세라믹 나노 입자 및 잉크 소재의 국내외 기술 동향 및 시장 전망에 대해 고찰하였다. 다이렉트 프린팅용 나노 입자 기술은 해외의 경우 UILVAC에서 연구 개발이 활발하게 진행되고 있는데, 주로 가스중 증발법에 의해 진행되고 있었다. 또한, 국내의 경우 전자부품연구원 등 산학연에서 활발하게 진행되고 있고, 가스중 증발법 및 저온 합성법 등 건식과 습식법에 의해 진행되고 있었다. 또한 이러한 금속 및 세라믹 나노 분말 입자를 이용하여 잉크를 제조하고 이를 다이렉트 프린팅 공정에 적용하여 박막 및 패턴을 제작하는 연구도 진행되고 있었다. 이러한 다이렉트 프린팅용 나노 입자 및 잉크는 전기, 전자, 정보, 통신 산업의 핵심 소재로서 관련 산업 및 시장이 빠른 속도로 증가하고 있다. 이러한 청정 공정 기술은 연구개발 단계에 있어 국내에서도 청정 기술을 이용하여 선진 기술에 접근하고 있는 결과가 제시되고 있다. 이와 같이 다이렉트 프린팅용 금속 및 세라믹 나노 입자 및 잉크의 기술에 있어서 세계적인 기술의 주도를 위해선 나노 입자 및 잉크의 청정 제조의 원천 기술 개발을 통한 기술 확보 및 시장의 경쟁을 통한 우위 점유가 필요하다.

• 한국철도학회논문집
• /
• 제9권4호
• /
• pp.349-356
• /
• 2006

At present, the selecting system and analytic estimation criterion on repair materials and methods of the deteriorated RC structures have not yet been set up in domestic. Under these circumstances, deterioration such as shrinkage crack, corrosion of rebar has been often occurred after repair, and this finally results in too frequent repairs. In this study, three types of repair methods were experimentally investigated by the accelerating test in a combined deterioration chamber and long-term field exposure test. Three types of repair methods applied in this study belong to a group of polymer cement mortar, which is commonly used in repair works. According to the results of this study, durability of repair mortar layers and corrosion properties of recovered rebar could be investigated in short period by the accelerating test in a combined deterioration chamber, which can simulate the condition of repeated high-and-low temperature and repeated dry-and-wet environment, spraying chloride solution and emitting $CO_2$ gas. After 36 month long-term filed exposure test in the coastal area, harmful macro-cracks are observed in the polymer cement mortar layer of some repair methods. These crack are considered to result from drying shrinkage of polymer cement mortar. Also, after 36 month exposure, amount of corrosion area and weight loss of rebar are found to be different according to the types of repair methods.

• 동력기계공학회지
• /
• 제12권4호
• /
• pp.5-11
• /
• 2008

The RI gasoline engine haying a sub-chamber had a high cycle variation due to the difficulty of the residual gas scavenge in the sub-chamber. To solve this problem and improve the combustion performance of RI engine, we devised a method to inject directly CNG fuel into the sub-chamber. A DI diesel engine of single cylinder was converted into a RI-CNG engine and an electronic control unit for the engine was manufactured. In this study, the combustion characteristics of the RI-CNG engine were investigated with the injection timings and air excess ratios at the load conditions of 50% throttle open rate and 1700rpm. As the results from this study, the RI-CNG engine worked reliably under the condition of the ignitable lean limit of $\lambda=1.7$ by showing the $COV_{imep}$ below about 5%. And the highest thermal efficiency could be obtained in the injection timing that produced the high imep and the low $COV_{imep}$ at the same time. The CO emission concentration indicated very low values and the THC and $NO_x$ showed an opposite pattern. With a view to improving the thermal efficiency and reducing the harmful emissions, the proper control region of the ignition timing and the mixture ratio were nearly ATDC $20^{\circ}\sim50^{\circ}$ and $\lambda=1.4$ respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제46권5호
• /
• pp.527-540
• /
• 2018

본 연구에서는 온열욕 겸용을 위해 제작한 숯가마와 전통식 숯가마에서 제조한 백탄의 특성에 대해서 비교, 검토하였다. 온열욕 겸용 숯가마는 밀폐된 숯가마에서 발생하는 미세먼지 및 유해가스와 같은 환경문제를 최소화하고 편안함과 안전성을 고려하여 제작하였다. 온열욕 겸용 숯가마에서 제조한 백탄은 전통식 숯가마의 백탄보다 회분과 휘발분이 다소 높았고 고정탄소가 다소 낮았다. 온열욕 겸용 숯가마에서 생산된 백탄의 밀도는 기존의 전통식 숯가마 백탄보다 약간 높았지만, 평형함수율과 pH는 거의 차이가 없었다. 발열량, 정련도, 경도와 해부학적 구조는 숯가마에 따른 차이가 없었다. 결론적으로 온열욕 겸용을 위해 개량된 숯가마에서 제조한 백탄은 국립산림과학원의 품질인증기준을 충족하였고, 온열욕 겸용 숯가마는 목탄제조에도 적합한 것으로 판단되었다.

• 한국정보통신학회논문지
• /
• 제22권9호
• /
• pp.1159-1164
• /
• 2018

최근 다양한 분야에서 사물 인터넷 활용이 늘고 있다. 특히 갑작스럽게 발생하는 재난재해 분야에서는 지속적 감시가 가능한 사물 인터넷의 역할이 매우 커지고 있으며, 이로 인해 사람들의 삶의 질 또한 크게 향상되고 있다. 따라서 본 연구에서는 밀폐공간의 특성과 환경적 위험성에 대해 살펴보고, 현재 상용화되고 있는 사물 인터넷 기술에 대한 검토가 이루어질 것이다. 밀폐공간에서의 사고는 다른 장소에 비해 매우 높게 나타나며, 사고를 예측하기 매우 어렵다. 이에 최근에는 사물인터넷을 활용한 밀폐공간에서의 사고를 예방하려는 다양한 시도가 나타나고 있다. 특히, 밀폐공간에서 발생할 수 있는 다양한 가스를 센서를 활용하여 탐지하고 이를 실시간으로 근로자에게 전송함으로써 사전에 위험을 감지하여 위험을 최소화할 수 있도록 하고 있다. 본 연구에서는 밀폐공간에서의 사고 예방을 위한 사물인터넷을 활용 사례를 살펴보고 이를 통해 사물인터넷을 활용한 효율적인 재난재해 예방 방안을 제시한다.