• 한국대기환경학회지
• /
• 제15권3호
• /
• pp.317-325
• /
• 1999

The demand of diesel engine on the construction equipment has been rapidly increased because of high thermal efficiency and fuel economy. The exhaust emission from nonroad vehicles equipped with diesel engine such as construction equipment, ship, and agricultural equipment, etc. Which are known to be harmful to human health and environment, has not been regulated in our country. But the regulation for nonroad vehicle has been already progressed in advanced country. So we investigated the contribution ratio of air pollution by construction equipment in order to establish the exhaust emission management strategy for nonroad vehicle. Based on the statistical data for construction equipment, 5 kinds of equipment are selected and tested in the engine dynamometer to determine the emission factor. And the amount of air pollutant from construction equipment are calculated by using of the emission factor and recommended exhaust emission standard for construction equipment.

• 한국물환경학회지
• /
• 제33권1호
• /
• pp.8-14
• /
• 2017

Microcystis aeruginosa (M. aeruginosa) is a cyanobacterium species that can form harmful algal blooms in freshwater bodies worldwide. The use of pine needle extract (PNE) to control nuisance algae by allelopathic inhibition will be environmentally friendly and promising. PNE removed successfully upto 98% of M. aeruginosa at the following optimal conditions: pH 7, $25^{\circ}C$ of temperature, 100 rpm of mixing rate, 5 min of mixing time. These results was indicated that the amount of 1 g/L PNE was removed 1g dryweight/L of M. aeruginosa. The kinetic data showed substrate inhibition kinetics and maximum growth rate was obtained when the M. aeruginosa was grown in medium containing 0.5 g/L of initial concentration of PNE. Different substrate inhibition models were fitted to the kinetic data and found the Luong model was best. The model predicted kinetic parameters were in agreement with the experimental findings. The natural extract, PNE, can be a promising inhibition due to its high efficiency and low dose requirements.

• 유공압시스템학회논문집
• /
• 제6권4호
• /
• pp.9-15
• /
• 2009

Hydraulic excavators are the representative of field robot and have been used in various fields of construction. Since the excavator operates in the hazardous working environment, operators of excavator are exposed in harmful environment. Therefore, the hydraulic excavator automation and remote operation system has been investigated to protect from the hazardous working environment. In this paper, remote operation excavator system is developed using the mini hydraulic excavator and the tracking control system of each links of excavator is designed. To apply the tracking control system, the adaptive sliding mode control algorithm is proposed. It is found that the performance of the proposed control system is improved through experimental results of using the remote operation excavator system.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2012년도 제46차 하계학술발표논문집 20권2호
• /
• pp.243-246
• /
• 2012

A new multi inner stage(MIS) cyclone was designed to remove the acidic gas and minute particles of harmful materials produced from electronic industry. To characterize gas flow in MIS cyclone, pressure and velocity distribution were calculated by means of computational fluid dynamics(CFD) commercial program. Also, the flow locus of particles and particle removal efficiency were analyzed by Lagrangian method. When outlet pressure condition was -1,000 Pa, the efficiency was the best in this study. Based on the CFD simulation result, the pressure loss and destruction removal efficiency was measured through MIS cyclone experiment.

• 한국직업건강간호학회지
• /
• 제18권1호
• /
• pp.71-83
• /
• 2009

Objective: This study was conducted to compare health conditions and problems, health promoting behavior, and risky environment of industrial workers. Methods: The subjects of this study were 1,075 workers in 40 factories, located in Daegu, Korea. Survey data were collected from April 17th, 2006 to April 28th, 2006. CMI (Cornell Medical Index) Health Checklist was used to assess the health problems, Health Rating Scale for health status, HPLP II for health promoting behavior, and environmental risk assessment tool for risky environment. The data were analyzed by One-way ANOVA and Pearson Correlation Coefficient using SPSS 12.0 for windows. Results: The results indicated a significant difference in health problems (F=4.70, p=.000), health conditions (F=2.47, p=.022), health promoting behavior (F=5.67, p=.000), and risky environment (F=14.75, p=.000) among these industrial workers. Conclusion: The results of this study suggest that there is a need to develop customized health care programs for each company to provide differentiated health care to different types of work places. Further studies are required to assess differences in work environment among different types of work places for measures to reduce harmful factors to the environment.

• 한국농공학회논문집
• /
• 제61권2호
• /
• pp.85-95
• /
• 2019

The internal environment in pig house is closely related to the animal productivity. In addition, it is important to consider a working environment inside the pig house due to high gas and dust concentrations. The poor working environment inside the pig house can cause health problems including respiratory diseases. To analyze the working environment, it is important to evaluate the ventilation efficiency to effectively remove harmful gases and dust. The purpose of this study is to develop a 3D CFD model to analyze the working environment in the pig house. CFD model was validated by comparing air temperature distributions between CFD computed and field measured data. The average air flow rate at the pig height was 40.1 % lower than the working height when incoming air was concentrated on upper layer by the installed ventilation system on the experimental pig house. Using the validated CFD model, the regional ventilation efficiency was computed by the TGD(tracer gas decay) method at the pig and working heights. There was a difference of ventilation efficiency on 14 % between the air stagnated section and the rest sections. Stagnated gas concentration can be effected by animal and human health.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.750-753
• /
• 2015

The continuing trend of built environment set forth by the rise of modernization and industrialization has led every country in achieving their respective economic development. Along side this trend is an issue that needs to be addressed - the environmental impacts of the built industry. Construction and maintenance of buildings are said to consume 40% of the world's energy, 65% of electricity, and 40% of raw materials, creating drastic pollutants harmful not only to the environment but also to human. Figures have been released and analyzed proving the contributions of built environment with environmental depreciation. Said figures earned concerns not just from different private and non-profit organizations but also the governments of every country, thus, steps towards sustainable development are being implemented. As a response, the "green" was added in the built environment. Later on, the now emerging concept of "National Green Building Code" found its role in the policy of various states in protecting the people in accord with the nature. This paper appreciates the initiatives of various countries and non-profit organizations in their drive to pursue sustainable green built environment in general, and specifically proposes an establishment of an "incentives grant framework" as an additional legislative policy to be included in the draft of the National Green Building Code of the Philippines.

• 한국수산과학회지
• /
• 제34권5호
• /
• pp.536-544
• /
• 2001

적조생물 Cochlodinium polykrikoides, Gyrodinium impudicum, Gymnodinium catenatum은 독성을 지니거나, 적조를 일으킴으로써 수산피해 및 보건위생상의 문제를 야기시키는 종이다. 이 종들의 적조발생 환경과 기작을 이해하기 위해서는 종별 생태생리 (eco-physiology) 특성 등을 파악할 필요가 있다. 본 실험에서는 한국 남해안 연안에서 이들 3종의 출현상황과 성장특성을 파악하기 위해 이 해역에서 분리한 종을 대상으로 온도, 염분, 조도 및 영양염류에 따른 성장도를 조사하였다. 1999년도 남해안 남해도, 나로도, 완도 연안에서 이들 3종의 최초출현시기는 수온이 $22.8\sim26.5^{\circ}C$인 7월 중순에서 8월 중순으로써 서로 비슷한 시기에 동반 출현하였다. 유영세포의 소멸시기는 G. catenatum의 경우 8월 중, 하순이었고, C. polykrikoides와 G. impudicum은 수온이 $23^{\circ}C$ 이하로 하강하는 9월 하순이었다. 출현기간 중의 최대밀도는 C. polykrikoides의 경우 $40\times10^6$cells/L 이상으로써 고밀도 증식을 하였으나, G. impudicum과 C. catenatum은 각각 3,460ce11s/L 및 440ce11s/L로써 매우 낮은 밀도로 존재하였다. 배양실험에서 C. polykrikoides, G. impudicum, G. catenatum는 $22\sim28^{\circ}C$에서 양호한 성장을 보였고, 최적수온은 $25^{\circ}C$ 내외로 판단되었는데, 이러한 결과는 적조발생시의 수온과 대체로 일치하였다. 염분에 따른 성장률은 3종 모두 $30\sim35\%$에서 양호한 성장률을 보였다. 3종 중 G. impudicum은 비교적 광염성의 특징을 보였고, G. cstenatum은 $35\%$ 이상의 고염분에서 특히, 저조한 성장률을 보였다. 조도에 따른 성장은 C. polykrikoides와 G. impudicum의 경우 특히 7,5001ux 이상의 고조도에서 성장률이 현저히 높은 것으로 나타났다. 이러한 결과는 C. polykrikoides의 경우 조도가 높은 하계에 표층에서 강한 집적현상을 보이면서도 광저해현상을 밟지 않고 양호한 증식을 할 수 있는 특성과 관련이 있을 것으로 추정되었다. C. polykrikoides와 G. impudicum의 질산 및 암모니아 질소 농도에 따른 성장은 $40{\mu}M$까지는 농도가 높을수록 성장률도 증가하였으나 그 이상에서는 큰 차이를 보이지 않아, 두 종의 질소 임계농도는 $13.5\~40{\mu}M$로 판단되었다. 또한, 인산인은 $4.05{\mu}M$ 까지는 농도가 높을수록 성장률도 증가하였으나 그 이상에서는 큰 성장차를 보이지 않아, 두 종 모두 인산인의 임계농도는 $1.35\sim4.05{\mu}M$로 판단되었다. 한편, C. polyklikoides는 DIN과 DIP 농도가 각각 $1.2{\mu}M$ 및 $0.3{\mu}M$ 이하로 낮았던 나로도와 남해도 외측해역에서도 적조를 형성하였다. 이와 같이 낮은 영양염류 하에서 왕성하게 증식할 수 있었던 이유는 이 종의 경우 일간 수직이동을 통해 야간에 저층에서 풍부한 영양염류를 흡수할 수 있었기 때문으로 해석되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.21-22
• /
• 2008

Recently, we are living in environment which various electrical appliance help our life. But the meanwhile, we had not researched how far the electromagnetic waves of electrical appliance affected the human's life. In accordance with, this paper will find out how far the human are weighed with electromagnetic waves of electrical appliance. And we will demonstrate the method that humans are failed under minimum effect from the harmful electromagnetic waves.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2003년도 추계학술대회 논문집
• /
• pp.213-214
• /
• 2003

Atmospheric particles have a great deal of influences on the climate and the air quality, which change the living and industrial environments of a specific area. Especially, the suspended dusts and aerosols can often have a harmful influences on workers' health, equipments at working places. For this reasons, the measurement of atmospheric particle size distributions is of considerable current interest. (omitted)