• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.222-227
• /
• 2007

In order to produce the antibody rich eggs against Salmonella gallinarum(S.G.) causing fowl typhoid, the productions of immunoglobulin in eggs were compared and examined with the feed additives, the variety of adjuvants in vaccines to layers, and the existence of additive antigens other than target microorganism. The examination of the average contents of specific IgY in immunized group by supplying hardwood charcoal showed that the group supplied with 0.5% hardwood charcoal had the highest contents, implying that the supply of hardwood charcoal promoted the production of specific IgY. Adjuvant appeared to have little effect on the average contents of total IgY, but specific IgY contents increased in the immunized group with Freund's adjuvant. Addition of BCG in adjuvant treatment increased specific IgY however, this feature was not seen in aluminum hydroxide treated group. Immunization at 15 week layers resulted in higher laying rate than immunization at 21 week and addition of hardwood charcoal in feed recovered laying rate. It was therefore, concluded that the feed supplement, such as hardwood charcoal followed by a proper immunization program concerning adjuvant, vaccination period and supplementary microorganism hastened the production of IgY.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.59-65
• /
• 2012

This paper presents the study on applications of a surplus heat source. The heat is generated while hardwood charcoals are produced. We measure the temperature of the generated heat and analyze whether it can heat water or not. The analytic results show that the generated heat is useful as one of heat sources. In agricultural methods using a vinyl house, heating expenses will be saved by 10~20% when the surplus heat source is used.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.12-23
• /
• 1984

This study was carried out to investigate on the catalytic pyrolysis products of hardwood (Alnus hirsuta (Spach) Rupr. Quercus acutissima Carruters, Robinia pseudoacacia L., and Populus tomentaglandulosa T. Lee) and comparing the rate of catalytic pyrolysis from untreated wood (ordinary wood) with that of treated wood with catalizer (Ammonium phosphate, Ammonium sulfate, Ammonium chloride and Urea). The results were summerized as follows; 1) It is the Populus tomentiglandulosa T. Lee that the species has the most content of holocellulose and pentosan. And Populus tomentiglandulosa exhibited high yield of the distillate in pyrolysis products by Ammonium phosphate with catalizer. 2) The distillate of pyrolysis products is decreased in accordance with increasing catalytic concentration. And untreated wood (ordinary wood) with catalizer has the most distillate of pyrolysis products. 3) The yield of charcoal in pyrolysis products is increased in accordance with increasing catalytic concentration and lignin content of species. 4) The caloric values of charcoal in pyrolysis products is decreased with increasing catalytic concentration. And untreated wood (ordinary wood) with catalizer had the most caloric values, but the caloric values of charcoal did not show statistically significent difference at 5% levels in catalizer.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.281-290
• /
• 2011

We analyzed the basic characteristics and adsorption property of carbonized materials from thinning byproducts of major Korean wood species for evaluating as charcoal making raw material. Yield of charcoal was decreased with increasing the carbonization temperature for all wood species. Refining degrees was 9.0 at $400^{\circ}C$, 3.3~5.0 at $600^{\circ}C$ and 0 at $800^{\circ}C$, and was no difference among wood species. With increasing the carbonization temperature, the fixed carbon content was also increased, and charcoal from softwoods had more fixed carbon content than that from hardwoods. Specific surface area was increased with increasing the carbonization temperature, softwood charcoal had more specific surface area than that of hardwood. Pinus rigida showed the highest specific surface area. In formaldehyde removal by charcoal, some materials had highest at $600^{\circ}C$ and the others had highest at $800^{\circ}C$. Pinus koraiensis, Qurcus acutissima and MDF showed maximum formaldehyde removal ability at $600^{\circ}C$. Ethylene gas removal ability of charcoal was increased with increasing the carbonization temperature, and the charcoal from Pinus rigida and Robinia pseudoacacia had higher ethylene gas removal ability than the other species.

• Proceedings of the Society of Korea Industrial and System Engineering Conference
• /
• 2002.05a
• /
• pp.243-257
• /
• 2002

A study on processing for producing cure seat radiated by Original Infrared Rays and Magnatic force. We are well aware that Original Infrared Rays and Magnatic force influence on our human body benificially. In the technical background of this research product, we treated that the product has some operations of ceramic hardwood charcoal, far infrared rays and magnetic, so it can serve large part curative values made of far infrared rays and magnetic force of ceramics. Also, in the special quality of the product deal with ceramic, hard charcoal, ferrite, gelatin what is needed in production. And among them, ferrite, ceramic and hard charcoal are introduced by the manufacturing process of the moleculeization. In concluding, this study described the manufacturing process on the basis of the worksheets and arranged the useful effect which effect on human body. There are so many symptoms in the pain of muscle. It's very various. for example, it is the cause of the liver, the spleen and a kidney function's weakening. the cause of the backbone subluxation, the cause of the shoulder joint and scapula, the cause of the sacrum and iliacjoint, the cause of hip joint and the cause of a sprain. In this thesis, we mainly deal with the method which the muscle and nervous system disease by fatigue and a sprain cure seat radiated by Original Infrared Rays and Magnatic force. then, Original Infrared Rays and Magnatic force pack up frapezius muscle, gluteus minimum muscle, gluteus medius muscle, gluteus maximus muscle, pririformis muscle around the spine. through this course the moral pressure by the nervous system disease can be treat.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.68
• /
• pp.9-20
• /
• 2001

A study on processing for producing cure seat radiated by Original Infrared Rays and Magnatic force. We are well aware that Original Infrared Rays and Magnatic force influence on our human body benificially. In the technical background of this research product, we treated that the product has some operations of ceramic hardwood charcoal, far infrared rays and magnetic, so it can serve large part curative values made of far infrared rays and magnetic force of ceramics. Also, in the special quality of the product deal with ceramic, hard charcoal, ferrite, gelatin what is needed in prodution. And among them, ferrite, ceramic and hard charcoal are introduced by the manufacturing process of the moleculeization. In concluding, this study described the manufacturing process on the basis of the worksheets and arranged theuseful effect which effect on human body. There are so many symptoms in the pain of muscle. It＇s very various. for example, it is the cause of the liver, the spleen and a kidney function＇s weakening. the cause of the backbone subluxation, the cause of the shoulderjoint and scapula, the cause of the sacrum andiliacjoint, the cause of hip joint and the cause of a sprain. In this thesis, we mainly deal with the method which the muscle and nervous system disease by fatigue and a sprain cure seat radiated by Original Infrared Rays and Magnatic force. then, Original Infrared Rays and Magnatic force pack up frapezius muscle, gluteus minimum muscle, gluteus medius muscle, gluteus maximus muscle, pririformis muscle around the spine. through this course the moral pressure by the nervous system disease can be treat.

• Journal of the Korean Wood Science and Technology
• /
• v.38 no.4
• /
• pp.275-281
• /
• 2010

Wood identification was conducted for the 8 Neolithic charcoals excavated at Giheung Nongseori Ruins through scanning electron microscopy. They were all identified as hardwood: 6 and 1 were found to be Prinus section and Cerris section of subgenus Lepidobalanus under genus Quercus, respectively, and the remaining 1 to be genus Betula. This species composition was thought to indicate the temperate to warm temperate climate region.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.1133-1140
• /
• 2009

The purpose of this study is to determine the most efficient method of removing sulfur dioxide from traditional herbal medicine (hanyak) by slow boiling using a traditional pipkin and an electronic slow boiler. By boiling a hanyak batch containing] 56.4ppm of sulfur dioxide for one hour using a traditional pipkin, 96.7 percent of the sulfur dioxide was removed, while two hours of slow boiling removed ]00 percent. Among different cover materials placed over the pipkin during the slow boiling process including the traditional Korean paper (hanji), regular hanji, filter paper and regular paper, the traditional hanji produced the best performance of sulfur dioxide removal. The initial pH level of the traditional hanji was] 0.03. After one hour of slow boiling hanyak batches in a traditional pipkin covered with traditional hanji, where each batch contained sulfur dioxide of 48ppm, 193ppm, 753ppm and 1,506ppm respectively, the pH level of the hanji cover material was reduced to 9.37, 9.14, 8.9 and 8.03 in respective cases. Our experiment using an electronic medicine slow boiler showed 82.8 percent removal of sulfur dioxide after one hour of slow boiling a hanyak batch containing 753ppm of sulfur dioxide. When hanyak batches were boiled by placing traditional hanji, filter paper, active carbon and hardwood charcoal separately in the middle area within the electronic slow boiler, the sulfur dioxide removal rate was 73.6 percent, 72.8 percent, 73.9 percent and 69.5 percent, respectively. When charcoal was added so as to remove toxic materials from the hanyak, its presence impeded the sulfur dioxide flow and thus reduced the removal efficiency contrary to our anticipation.

• Korean Journal of Organic Agriculture
• /
• v.20 no.3
• /
• pp.297-311
• /
• 2012

Since 1997, Korean Ministry of Knowledge Economy and Ministry of Environment have established data on some 400 basic raw and subsidiary materials and process like energy, petro-chemical, steel, cement, glass, paper, construction materials, transportation, recycling and disposal etc by initiating establishment of LCI database. Regarding agriculture, Rural Development Administration has conducted establishment of LCI database for major farm products like rice, barley, beans, cabbage and radish etc from 2009, and released that they would establish LCI database for 50 items until 2020 later on. The domestic LCI database for seeds, seedling, agrochemical, inorganic fertilizer and organic fertilizer etc is only at initial stage of establishment, so overseas LCI databases are brought and being used. However, since the domestic and overseas natural environments differ, they fall behind in reliability. Therefore, this study has the purpose to select organic farming materials, survey the production process for various types of organic farming materials and establish LCI database for the effects of greenhouse gas emitted during the process in order to select carbon basic units for agricultural production system compliant in domestic situation instead of relying on overseas data and apply life cycle assessment of greenhouse gas emitted by each crop during the process. As for selecting methods, in this study organic farming materials were selected in the method of direct observation of material and bottom-up method a survey method with focus on the organic farming materials admitted into rice production. For the basic unit of carbon emission amount by the production of 1kg of organic farming material, the software PASS 4.1.1 developed by Korea Accreditation Board under Ministry of Knowledge Economy was used. The study had the goal to ultimately provide basic unit to calculate carbon emission amount in executing many institutions like goal management system and carbon performance display system etc in agricultural sector to be conducted later on. As a result, emission basic units per 1kg of production were calculated to be 0.0088kg-$CO_2$ for charcoal, 0.1319kg-$CO_2$ for grass liquid, and 0.2804kg-$CO_2$ for microbial agent.