• 한국해양공학회지
• /
• 제14권2호
• /
• pp.70-75
• /
• 2000

In this paper a new constitutive model for ductile materials was proposed. This model can describe the material degradation due to the evolution of isotropic damage during elasto-platic deformation. The plastic flow rule was derived under the framework of thermodynamic approach of continuum damage mechanics(CDM) in which plastic strain hardening parameters and isotropic damage were taken as thermodynamic state variables. And the process to determine material constants for constitutive model using an experimental data was presented.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
• /
• pp.65-73
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation, the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points, the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurements and PAM-STAMP.

• 한국강구조학회 논문집
• /
• 제19권3호
• /
• pp.291-301
• /
• 2007

재료비선형 수치해석기법 중, 오버레이 모델은 같은 평면상에 여러 개의 레이어를 배치해 각 레이어의 평균한 값을 모델 전체의 값으로 사용하는 원리를 사용하는 모델로서 구성레이어의 변형률 경화계수, 단면적 및 항복응력 등을 파라메타로 설정함으로써 바우싱거 효과 및 변형률 경화현상을 표현하기에 적합한 모델지만, 응력-변형률관계의 기하학적 특징을 직접적으로 근사하기 위한 파라메타의 설정이 복잡하다는 단점이 있다. 본 논문에서는 평면응력상태를 대상으로 하며, 변형률 경화를 고려한 오버레이 모델의 정식화를 열역학을 사용하여 구체적으로 정의한다. 수치해석에 있어 전체적인 해석파라메타로서는 항복응력분포만을 고려하였으며, 항복응력분포의 설정 방법 및 그에 따른 항복응력분포함수의 p, q, r값을 정성적으로 비교분석한다. 최종적으로 탄소강과 합금강에 대한 일축, 다축응력의 실험결과와 제안한 수치해석기법의 해석결과를 비교하여 타당성을 검토한다.

• 한국지반공학회논문집
• /
• 제21권8호
• /
• pp.27-35
• /
• 2005

액상화에 따른 지반의 과도한 변형으로 인한 피해가 자주 발생되고 있다. 그에 따른 지반의 움직임을 예측하기 위해서는 유효응력 개념에 기초한 수치해석 기법이 요구되어 진다. 본 연구에서는 지진 및 유사한 반복 하중에 따른 수압의 상승을 예측할 수 있는 연성(fully coupled) 유효응력 구성모델인 UBCSAND를 제안하였다. 제안된 모델은 간단한 완전탄소성모델인 Mohr-Coulomb을 변형한 형태로 마찰각(friction angle)과 팽창각(dilation angle)을 점진적으로 증가시킴으로써, 기존의 파괴상태내에서도 연속적인 소성변형 발생을 표현할 수 있다. 항복함수는 전단응력과 평균응력의 비인 $(\sigma'_1-\sigma'_3)/(\sigma'_1-\sigma'_3)$로 나타내며, 응력도의 원점에서 시작하는 무한개의 방사선을 의미한다. 따라서, Mohr-Coulomb의 파괴면과 같은 형태의 무수한 항복면을 가진다. 소성 경화법칙은 등방경화(isotropic hardening)와 이동경화(kinematic hardening)를 혼합한 형태를 이루고 있다. 재하(loading) 및 재재하(reloading)시에는 연속적인 소성 변형이 일어나나, 제하(unloading)시에는 탄성변형을 가정하였다. 제안된 모델은 느슨한 Fraser River 모래를 이용한 직접단순전단시험(Direct simple shear test)결과와 비교하여 검증하였다.

• 한국재료학회지
• /
• 제24권4호
• /
• pp.201-206
• /
• 2014

TiC-21 mol% Mo solid solution (${\delta}$-phase) and TiC-99 mol% Mo solid solution (${\beta}$-phase), and TiC-(80~90) mol% Mo hypo-eutectic composite were deformed by compression in a temperature range from room to 2300 K and in a strain rate range from $4.9{\times}10^{-5}$ to $6.9{\times}10^{-3}/s$. The deformation behaviors of the composites were analyzed from the strengths of the ${\delta}$- and ${\beta}$-phases. It was found that the high strength of the eutectic composite is due primarily to solution hardening of TiC by Mo, and that the ${\delta}$-phase undergoes an appreciable plastic deformation at and above 1420 K even at 0.2% plastic strain of the composite. The yield strength of the three kinds of phase up to 1420 K is quantitatively explained by the rule of mixture, where internal stresses introduced by plastic deformation are taken into account. Above 1420 K, however, the calculated yield strength was considerably larger than the measured strength. The yield stress of ${\beta}$-phase was much larger than that of pure TiC. A good linear relationship was held between the yield stress and the plastic strain rate in a double-logarithmic plot. The deformation behavior in ${\delta}$-phase was different among the three temperature ranges tested, i.e., low, intermediate and high. At an intermediate temperature, no yield drop occurred, and from the beginning the work hardening level was high. At the tested temperature, a good linear relationship was held in the double logarithmic plot of the yield stress against the plastic strain rate. The strain rate dependence of the yield stress was very weak up to 1273 K in the hypo-eutectic composite, but it became stronger as the temperature rose.

• 한국전산구조공학회논문집
• /
• 제30권1호
• /
• pp.1-6
• /
• 2017

본 논문에서는 비교적 최근 정립된 co-rotational 이론을 기반으로 한 4절점 평면요소 정식화를 확장하여 9절점 평면 요소에 적합한 CR 정식화를 제시하고자 한다. 그리고 등방성 재료의 소성 해석을 위해, 선형 경과 규칙(bi-linear hardening rule)을 바탕으로 하는 Newton-Raphson return-mapping 알고리즘을 적용하였다. 이때, von Mises 기준을 적용하여 소성 변형 상태를 예측하였다. Lagrange 승수를 도입하여 2차원 접촉에 대한 구속조건을 부여하였다. 개발한 요소는 상용프로그램인 ABAQUS 해석결과와 비교 검증하였다.

• 전산구조공학
• /
• 제10권4호
• /
• pp.217-228
• /
• 1997

p-version 유한요소법에 의한 고정밀해석은 응력특이가 발생하는 선형탄성 문제에 매우 적합한 방법으로 인식되고 있다. 해석 결과의 정확도, 모델링의 단순성, 입력자료에 대한 통용성 및 사용자와 CPU 시간의 절감 등 여러장점이 선형탄성 문제에 적용되어 우수성이 입증되었지만, 탄소성 해석분야는 아직 적용이 이루어지지 않고 있다. 그러므로 본 논문에서는 일-경화재료에 대한 구성방정식을 이용하여 정식화된 증분소성이론과 소성유동법칙에 근거한 재료비선형 p-version 유한요소모델이 제안되었다. 비선형방정식을 풀기 위해 Newton-Raphson법과 초기강성도법 등의 반복법이 모색되었다. 제안된 모델을 이용하여 개구부를 가진 사각형 평판과 내압을 받는 두꺼운 실린더, 그리고 등분포하중을 받는 원판해석 등의 수치실험이 수행되었다. 한편, p-version 모델에 의한 해석결과는 문헌의 이론값과 상용유한요소프로그램인 ADINA의 해석결과와 비교 검증되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.308-313
• /
• 2004

SP test has been confirmed the availability, however the application of SP test is hampered because the relation of stress-strain and load-displacement is not determined definitely. This study suggested an evaluation technique of plastic flow characteristic for X20CrMoV121 steel weldment through inverse analysis using SP test and finite element analysis(FEA). From the result, good agreement was found in load-displacement curves obtained from SP test and FEA. Also, The behavior of load-displacement curve from FEA show a rule that load is increase with increasing K(strength coefficient) and displacement is increase with increasing n(work hardening index). From the inverse analysis, true stress-strain curve could be obtained for each local structure of weldment. And the CGHAZ and WM, which showed lower load- displacement behavior, have smaller work hardening index, while FGHAZ have the largest index.

• Computers and Concrete
• /
• 제8권4호
• /
• pp.371-388
• /
• 2011

In this paper, time-continuous constitutive equations for strain rate-dependent materials are presented first, among which those for the overstress and the consistency viscoplastic models are considered. By allowing the stress states to be outside the yield surface, the overstress viscoplastic model directly defines the flow rule for viscoplastic strain rate. In comparison, a rate-dependent yield surface is defined in the consistency viscoplastic model, so that the standard Kuhn-Tucker loading/unloading condition still remains true for rate-dependent plasticity. Based on the formulation of the consistency viscoplasticity, a computational elasto-viscoplastic constitutive model is proposed for the short fiber-reinforced fresh cementitious paste for extrusion purpose. The proposed constitutive model adopts the von-Mises yield criterion, the associated flow rule and nonlinear strain rate-hardening law. It is found that the predicted flow stresses of the extrudable fresh cementitious paste agree well with experimental results. The rate-form constitutive equations are then integrated into an incremental formulation, which is implemented into a numerical framework based on ANSYS/LS-DYNA finite element code. Then, a series of upsetting and ram extrusion processes are simulated. It is found that the predicted forming load-time data are in good agreement with experimental results, suggesting that the proposed constitutive model could describe the elasto-viscoplastic behavior of the short fiber-reinforced extrudable fresh cementitious paste.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1528-1534
• /
• 2001

In order to improve Leak-Be(ore-Break methodology, more precisely the crack growth evaluation, a round robin analysis was proposed by the CEA Saclay. The aim of this analysis was to evaluate the crack initiation life, penetration life and shape of through wall crack under cyclic bending loads. The proposed round robin analysis is composed of three main topic; fatigue crack initiation, crack propagation and crack penetration. This paper deals with the first topic, crack initiation in a notched pipe under four point bending. Both elastic-plastic finite element analysis and Neuber's rule were used to estimate the crack initiation life and the finite element models were verified by mesh-refinement, stress distribution and global deflection. In elastic-plastic finite element analysis, crack initiation life was determined by strain amplitude at the notch tip and strain-life curve of the material. In the analytical method, Neuber's rule with the consideration of load history and mean stress effect, was used for the life estimation. The effect of notch tip radius, strain range, cyclic hardening rule were examined in this study. When these results were compared with the experimental ones, the global deformation was a good agreement but the crack initiation cycle was higher than the experimental result.