• Transactions of Materials Processing
• /
• v.13 no.1
• /
• pp.15-20
• /
• 2004

In order to evaluate spring-back behavior in automotive sheet forming processes, a panel shape idealized as a double S-rail has been investigated. After spring-back has been predicted for double S-rails using the finite element analysis, results has been compared with experimental measurements for three automotive sheets. To account for hardening behavior such as the Bauschinger and transient effects in addition to anisotropic behavior, the combined isotropic-kinematic hardening law based on the Chaboche type model and a recently developed non-quadratic anisotropic yield function have been utilized, respectively.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.945-948
• /
• 2008

The effects of polymer-cement ratio on strength properties of ultrarapid-hardening acrylic-modified concretes. As a result, the flexural and tensile strengths of ultrarapid-hardening acrylic-modified concretes increase with increasing of polymer-cement ratio. In particular, the acrylic-modified concretes with a polymer-cement ratio of 20% provide approximately 1.5 times higher flexural and tensile strengths than unmodified concretes. Such high strength development is attributed to the high flexrul and tensile strengths of arcylic polymer and the improved bond between cement hydrates and aggregates because of the addition of acrylic polymer. However, the compressive strengths of ultrarapid-hardening acrylic-modified concretes decrease with increasing of polymer-cement ratio.

• Journal of Ocean Engineering and Technology
• /
• v.25 no.3
• /
• pp.73-84
• /
• 2011

This is the fifth in a series of companion papers dealing with the dynamic hardening properties of various marine structural steels at intermediate strain rates. Five steps of strain rate levels (0.001, 1, 10, 100, 200/s) and three steps of temperature levels (LT ($-40^{\circ}C$), RT, and HT ($200^{\circ}C$)) were taken into account for the dynamic tensile tests of three types of marine structural steels: API 2W50 and Classifications EH36 and DH36. The total number of specimens was 180 pieces. It was seen that the effects of dynamic hardening became clearer at LT than at RT. Dynamic strain aging accompanying serrated flow stress curves was also observed from high temperature tests for all kinds of steels. The dynamic hardening factors (DHFs) at the two temperature levels of LT and RT were derived at the three plastic strain levels of 0.05, 0.10, 0.15 from dynamic tensile tests. Meanwhile, no DHFs were found for the high temperature tests because a slight negative strain rate dependency due to dynamic strain aging had occurred. A new formulation to determine material constant D in a Cowper-Symonds constitutive equation is provided as a function of the plastic strain rate, as well as the plastic strain level. The proposed formula is verified by comparing with test flow stress curves, not only at intermediate strain rate ranges but also at high strain rate ranges.

• Transactions of Materials Processing
• /
• v.21 no.7
• /
• pp.447-452
• /
• 2012

This paper is concerned with forming of Al-Zn-Mg-Sc aluminum alloy bolts, focusing on the effects of heat treatment and age-hardening on the formability and ductile damage evolution. Both experimental and finite element studies were performed. From the experiments, it is observed that the heat treatment or the normalization of Al-Zn-Mg-Sc aluminum alloy increases its formability dramatically resulting in successful bolt forming, while the effects of age-hardening at room temperature on the stress-strain relationship and formability are not very critical. Deformation characteristics such as distribution of effective stress and strain, material flow, and ductile damage evolution during bolt forming are examined using a commercial finite element package, Deform-2D. It should be noted that the extrusion load predicted by the finite element method matches well the experiment results. The finite element predictions on the deformation characteristics support the experimental observations such as fracture of bolt head flange, material flow, and distribution of hardness.

• The Journal of Fisheries Business Administration
• /
• v.28 no.2
• /
• pp.87-105
• /
• 1997

The objective of this study is to analyze the effects of the oyster seed selection on profitability of the oyster aquaculture business The results of the analysis are as follows ; 1) The comparison of profitability among four different oyster seed applied to the four different scale : 1ha, 3ha, 5ha, and 10ha. The results of the comparison show that, for all scale, the artificial oyster seed is more profitable than the natural oyster seed or the natural oyster seed imported from Japan. 2) There are four important determinant variables of profitability to aquaculture business. In the order of their effect, it is oyster price, quantity of production, labor cost, and seed price. 3) If differences of price between the artificial hardening oyster seed and the natural hardening oyster seed are more less 1,430 won, the former is better. 4) The effect of increasing income of fishermen are estimated about 58.5 billion won or 102 billion won from the artificial oyster seed on the oyster aquaculture.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.3
• /
• pp.566-571
• /
• 1999

Effects of storage temperature at 18oC and 5oC for 9 days and heating conditions on textural char acteristics in strong wheat flour gels were investigated using a Instron after microwave (2450MHz, 700W). Heating condition did not affect the texture property in the wheat flour gels, but the frozen storage was very effective to prevent the hardening of the samples. Hardness, adhesiveness, and gumminess in the wheat flour gels decreased in increasing moisture content from 45% to 55%, but there was little change in cohesiveness. The storage at room temperature for 2 hours resulted in increased hardness in the heated wheat flour gels. PE wrap package of the wheat flour gels prevented weight loss by 3~6% and hardening effectively. Sugar, or sugar and shotening resulted in increased hardness in loaf bread. The hardness and weight loss in loaf breads were markedly changed by the heating time with microwave. The most critical time point was around 4 minutes following the heating.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.95-100
• /
• 2010

Drawing and normalizing are efficient means for controlling strength, fatigue and machinability of free machining steel. Normally strength and machinability are conflicting properties which need to be optimized. In this study, the effects of normalizing temperature and reduction of area on strength, fatigue and machinability were investigated. Fine grains were generated at lower normalizing temperature and fatigue life was increased with decreasing grain size. Matrix was work hardened and elongated with increasing reduction of area. Inclusions also were elongated and cross-sectional area of inclusions along drawing axis was decreased. The effects of work hardening and grain size on fatigue life were significant, but only work hardening affected machinability. Shape and distribution of inclusions after drawing had little effect on fatigue life and machinability.

• The Korean Journal of Soil Zoology
• /
• v.3 no.1
• /
• pp.9-16
• /
• 1998

Effects of temperature, pH, and salt concentration on the preservation of the infective juvenile entolopathogenic nematodes, Steinernema carpocapsae, were analyzed. The effects of acclimation to sublethal low temperature and glycerol concentrations on rapid cold hardening of the nematodes were also evaluated to set up the conditions for their cryopreservation. All tested environmental factors could change the storage effectiveness of the nematodes. These analyses indicated that the optinal storage condition for the nematodes consisted of $15^{\circ}C$, pH 8.5, and 0.5-1.0% salt concentration. The nematodes showed a rapid could hardening in response to $5^{\circ}C$ for 2h. Glycerol induced the nematodes to increase the cold hardiness. Its high concentration over 10%, however, gave a harmful effect on the nematode survival.

• Clinical and Experimental Reproductive Medicine
• /
• v.27 no.1
• /
• pp.23-29
• /
• 2000

Objective: Zona pellucida (ZP) has been thought to be the barrier of egg to sperm penetration before and after fertilization. The phenomenon of ZP hardening has been considered as a post-fertilization event until now, and it is generally accepted that it is caused by the secretory products of cortical granules released during the cortical reaction. Hardening of ZP could occur "spontaneously" in mammalian oocytes in standard culture conditions, and that it is probably not a consequence of cortical reaction. The purpose of our study was to investigate the effect of human amniotic fluid (HAF) on nuclear maturation (NM) and fertilization ability of mouse immature oocytes. Methods: HAF was obtained from patients undergoing amniocentesis at $16{\sim}20$ weeks of gestation. HAF from five to ten patients was centrifuged and the supernatants was pooled. Cumulusenclosed mouse immature oocytes were incubated in the medium containing HAF, and examined to confirm NM and fertilization. Female ICR mice (about 3 weeks old) were stimulated with 7.5 IU PMSG. Immature oocytes were isolated at $48{\sim}52$ hrs post PMSG injection and cultured in TCM-199 supplemented with 20% HAF for 18 hrs. FBS was used as a control for the examination. Matured oocytes (MII) were fertilized with sperms collected from the epididymis of male mice (over 10 weeks old). Fertilization was in conducted T6 medium containing 15 mg/ml BSA, and confirmed at 6 hrs post-insemination. Fertilization rate was assessed in zona-intact or zona-free oocytes (denuded by trypsin). Evaluation of NM and fertilization was carried out by rapid staining method. ZP hardening was evaluated by incubating cumulus cell-free mature oocytes in 0.001% chymotrypsin at $37^{\circ}C$ for 10 min. Results: There was no significant difference between the effects of HAF (86.6%) and FBS (87.7%) supplements on NM of immature oocytes. When maturation medium was supplemented with HAF, total fertilization rates (7%) were significantly lower (p<0.01) than that of FBS (85.1%). In HAF group, fertilization rate was increased (p<0.01) in zona-free oocytes (7% versus 100%). The resistance of mouse oocyte ZP to digestion by chymotrypsin after maturation in vitro was significantly higher (p<0.01) in HAF group (86.7%) than in FBS (6.7%). To culture oocytes in FBS were very effective in preventing ZP hardening. However cultured oocytes in HAF showed high rate of ZP hardening (p<0.01). Conclusions: These results suggest that HAF can be used as a supplement for the NM of mouse immature oocytes in vitro. However, HAF induces spontaneous hardening of ZP of mouse immaure oocytes during maturation in vitro.

• Journal of the Korea Concrete Institute
• /
• v.14 no.5
• /
• pp.660-667
• /
• 2002

The effects of polymer-cement ratio and antifoamer content on the durability of ultrarapid-hardening polymer-modified mortars using redispersible polymer powder are examined. As a result, regardless of the antifoamer content, the setting time of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder tend to delay with increasing polymer-cement ratio. The water absorption and chloride ion penetration depth of the ultrarapid-hardening polymer-modified mortars using redispersible polymer powder decrease with increasing polymer-cement ratio and antifoamer content. The resistance of freezing and thawing and chemicals improvement is attributed to the improved bond between cement hydrates and aggregates because of the incorporation of redispersible polymer powder