• 열처리공학회지
• /
• 제34권6호
• /
• pp.272-280
• /
• 2021

The influence of acetylene flow rates on the carburizing behavior of an AISI 4115 steel in 1 ton-class mass production-type vacuum carburizing furnace has been studied through microstructure, carbon concentration, hardness analyses. The AISI 4115 steels were carburized with various flow rates (20, 32.7, 60 l/min) and locations in the furnace (top, center, bottom) at 950℃. The acetylene flow rate played an important role in controlling the carburizing properties of carburized samples, such as effective case depth and uniformity carburizing according to location in the furnace. At an acetylene flow rate of 20 l/min, the carburized samples had a shallow average hardened layer (0.645 mm) compared to the target hardening depth (1 mm) due to low carbon flux and spatial uniformity of carburization (17.8%) in the furnace. At a flow rate of 60 l/min, the carburized samples showed an average hardened layer (1.449 mm) deeper than the target hardening depth and had the spatial uniformity of carburization (98.8%). In particular, at a flow rate of 32.7 l/min, the carburized samples had an average hardened layer (1.13 mm) close to the target hardening depth and had the highest carburizing uniformity (99.1%). As a result, an appropriate flow rate of 32.7 l/min was derived to satisfy the target hardening depth and to have spatial uniform hardened layer in the furnace.

• 한국군사과학기술학회지
• /
• 제16권3호
• /
• pp.340-347
• /
• 2013

Weapon effect is a key issue throughout the life cycle of weapon systems. Only when weapon effect is considered properly, Effects Based Operation(EBO), Effects Based Acquisition(EBA), and Effects Based Development(EBD) could be possible. Because the transfer of weapon effect technologies is restricted in most foreign counties, independent development is necessary. In this paper, framework of weapon effects calculator for hardened targets is proposed to meet the own development needs. It is designed focusing on running time, validation and expandibility by adoption of modular architecture. Required technologies for each module are identified, and unclassified ones are summarized.

• 한국전산구조공학회논문집
• /
• 제27권6호
• /
• pp.551-555
• /
• 2014

본 논문에서는 견고표적 피해분석 무기효과 계산 SW의 Framework에 대하여 기술하였다. 탄두의 침투이력, 기폭에 의해 발생되는 폭압, 폭압에 의한 구조 및 비구조 구성품 파괴가 이론식 및 경험식을 통해 계산되었다. 또한 사용자의 편의를 위해 손쉬운 UI가 설계되었으며, 각 해석 단계는 모듈화되어 향후 개선 및 보완이 용이하게 하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.169-170
• /
• 2018

In this study, TGA analysis of hardened cement paste with fire damage was performed. The mass reduction rate of 600 ℃ specimens was about 22 ~ 25%, and the sample of 800 ℃ showed the mass loss rate of 9 ~ 13%. As the target temperature and hold time increased, the mass reduction rate decreased. As the depth increased, the mass reduction rate decreased.

• 한국건축시공학회지
• /
• 제8권4호
• /
• pp.87-93
• /
• 2008

With an increased use of alternative aggregate due to exhaustion of quality aggregate resources, the amount of used crushed aggregates have been increased and as a result, development of admixture materials has also been improved and its amount of use is increasing from day to day in order to secure quality in concrete. Accordingly, the purpose of this study is to make concrete of good quality by using chemical admixture developed in this study by replacement rate of fine aggregate. At first, susceptibility, compressive strength ratio and length change ratio in both fresh and hardened concrete were evaluated according to corresponding regulation. As for high performance related regulation, APC NO.3 and PC series were going to rule, and as for AE agent regulation, replacement ratio of fine aggregate of high performance chemical admixture was 10:0 and other chemical admixture met quality regulation for AE agent.

• 한국군사과학기술학회지
• /
• 제7권1호
• /
• pp.59-65
• /
• 2004

Survivability of the general purpose warhead during the target impact was studied. We first simulated the penetration phenomena and temporarily defined the survivability of the warhead at the impact situation. Next we launched the warhead projectiles by using Counter Mass Gun(CMG) system against the simulated specific steel target. The recovered warheads were carefully investigated and the penetration behaviors were analyzed. As a result the warhead can be hardened efficiently to enhance the survivability with the help of CMG test ＆ analysis.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.12-12
• /
• 2000

This paper investigated the effect of the film deposition rate for $CrN_x$ microstructure and mechanical properties. For these purpose, pure Cr an stoichiometric CrN films were deposited with various target power density on Si hardened M2 tool steel. The variation of ni trogen concentration in $CrN_x$ f analyzed by AES and deposition rate was calculated by measuring of thickness using ${\alpha}-step$ profilometer. The microstructure was analyzed by X-Ray Diffract and Scanning Electron Microscopy(SEM), and mechanical properties were evalua residual stress, microhardness and adhesion tests. Deposition rate of Cr and CrN increased as an almost linear function of target power density from $0.25\mu\textrm{m}/min$ and $0.15\mu\textrm{m}/min$ to $0.43\mu\textrm{m}/min$. Residual stresses of Cr and CrN films were from tensi Ie to compressive stress with an increase of deposi tion rate a compressive stresses were increased as more augmentation of deposition r maximum hardness value of $2300kg/\textrm{mm}^2$ and the best adhesion strength correspond HF 1 were obtained for CrN film synthesized at the highest target densitY($13.2W/\textrm{mm}^2$) owing to high residual compressive stress and increasing mobility.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 추계 학술논문 발표대회 논문집
• /
• pp.29-32
• /
• 2006

Experimental test results of field construction, Cheongju University Educational Liberal Art Building, applying the insulating curing method on slab concrete showed that the quality of concrete in fresh and hardened state satisfied all target values. Temperature history of slab concrete in A and B area secured more than $7.8{\sim}9.2^{\circ}C$ higher than outside atmosphere. After completing certain curing period of time on the surface of the structure, crack occurrence was not found. It is concluded that the preventing vaporization of moisture by the insulating curing method reduces plastic and drying shrinkage as welt as improves durability.

• Computers and Concrete
• /
• 제26권6호
• /
• pp.577-585
• /
• 2020

By the increasing amount of waste materials, it eventually dumped into the environment and covering a larger area of the landfill which cause several environmental pollution problems. The utilization of Palm Kernal Shell Ash (PKSA) in concrete might bring a great benefit in addressing both environmental and economic issues. This article investigates the effect of PKSA as a partial cement replacement of High Strength Concrete (HSC). Several concrete mixtures were prepared with different PKSA of 0%, 10%, 20%, and 30% replaced by the cement mass. This procedure was replicated twice for the two different target mean strengths of 40 MPa and 50 MPa. The mixtures were prepared to test different fresh and hardened properties of HSC including slump test, the compressive strength of 3, 7, 14, 28, and 90 days, flexural strength of 28-days, drying shrinkage, density measurement, and sorptivity. It was observed 10% PKSA replacement as optimum percentage which reduced the drying shrinkage, sorptivity, and density and improved the late-age compressive strength of concrete.

• 자원리싸이클링
• /
• 제29권1호
• /
• pp.53-61
• /
• 2020

본 연구는 시멘트 대비 산업부산물을 90% 이상 대체한 친환경 결합재를 이용하여 저강도·고유동을 갖는 지반보수용 기포콘크리트 소재를 개발하기 위한 연구로서, 산업부산물을 다량 활용시 발생하는 기포콘크리트의 초기 침하율 및 체적변화를 개선하기 위하여 CSA(Calcium sulfo aluminate)를 소량 대체하여 기초특성을 평가하였다. 기포콘크리트용 친환경 결합재 대비 CSA의 대체율은 2.5, 5, 10%로, 굳지않은 특성, 경화특성, 공극구조 및 수화물을 분석하였다. 실험결과 친환경 결합재 사용시의 높은 침하깊이를 CSA 2.5% 사용만으로도 개선할 수 있었으며, 그로인해 경화 후에도 타설된 시험체의 상중하의 중량편차도 개선되었다. CSA 첨가에 따라 공극구조도 작고 균일한 사이즈의 독립기포 형성에 기여하였으며, 초기강도는 개선되었다. 그러나 CSA의 혼입률의 증가에 따라 장기강도는 감소하였으나, 5% 이하를 사용할 경우 목표강도를 만족하였다. 이로써 산업부산물을 다량 활용한 친환경 결합재에 CSA의 2.5% 첨가만으로도 목표성능의 저강도 고유동을 갖는 지반 보수용 기포콘크리트 제조가 가능한 것을 확인하였다.