• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.160-165
• /
• 1999

Osmotic pressure induced by semi-permeability of hardened cement pasts and cement mortar was studied, which was considered to be a cause of failure such as separation and blistering of floor coatings or wall coatings from the concrete substrate. The specimens with a water cement ratio of 45, 60 and 75% were installed between the solution of sodium chloride and distilled water. First, we measured water flux from distilled water to sodium chloride and the ion flux of Na+ and Cl- through the specimens. Then, we measured osmotic pressure induced by semi-permeability of the specimens using an apparatus which was specially developed for this study. It was made clear that hardened cement paste and cement mortar have properties of semipermeability, and the osmotic pressure is closely related to their water cement ratio. Finally, we calculated the osmotic pressure according to Staverman's equation, which was obtained for organic membranes, and tried to explain quantitatively the observed pressure.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1990년도 가을 학술발표회 논문집
• /
• pp.131-134
• /
• 1990

Many papers have been published on drying shrinkage of hardened cement paste and cement mortar. The causes of drying shrinkage in cement mortar may be attributed to its mechanical properties, temperature, curing time and the evaporation of water from cement mortar. This paper deals only with drying shrinkage in cement mortar. In particular, the relationships between water evaporation and drying shrinkage are discussed.

• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.451-456
• /
• 2015

본 연구는 시멘트계 바탕 바름재에 사용되는 바닷모래를 대체하기 위한 재료로서 현무암 가공과정에서 발생되는 현무암 석분슬러지를 재활용하기 위해 현무암 석분슬러지를 사용한 경화모르타르의 특성(연도변화, 응결경화, 흡수계수, 건조수축, 그리고 부착강도 실험)을 평가하였다. 현무암 석분슬러지를 사용한 경화모르타르는 콘크리트 바탕 바름재에 사용되는 기존의 보통모르타르의 특성과 유사하거나 좀 더 향상된 성능을 보였다. 그러나, 현무암 석분슬러지를 사용한 경화모르타르는 보통 모르타르보다 재령 8~9일 이후 건조수축이 증가되었고 부착강도는 감소되었다. 그러나 현무암 석분슬러지를 사용한 경우, KS F 4716 '시멘트계 바탕 바름재'에서 요구하는 최소 품질 규준은 만족하였다.

• 한국세라믹학회지
• /
• 제28권7호
• /
• pp.509-516
• /
• 1991

The effect of various polymers on the freeze-thaw resistance of hardened cement mortar was investigated. For this study, styrene butadiene rubber (SBR), ethylene vinyl acetate (EVA), polyvinyl alcohol (PVA) were used to prepare cement mortar specimen, and then freeze-thaw experiment was carried out. By adding SBR adn EVA to the specimen, the freeze-thaw resistance of specimens was improved, but when PVA was added to the specimen, its freeze-thaw resistance was lowered. Particularly, the specimens which were added 5, 10% of SBR and 5% of EVA showed excellent freeze-thaw resistance in the salt environment.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.142-147
• /
• 1995

In this study, styrene-maleic anhydride copolymer (SMA) was synthesized from styrene and maleic anhydride and further reacted with sulfuric acid to obtain water-soluble SMA and the flow and strength tests of cement mortar mixed with copolymers were carried out to evaluate the capability of copolymers as high range water reducer for the concrete. It was found from flow experiment that the fluidity of cement mortar mixed with sulfonated SMA (SSMA) was larger than that miced with aminophenol-substituted SSMA (SmSMA). The decreasing rate of the flow of cement mortar mixed with SSMA and SmSMA was decreasing rate of the flow of cement mortar mixed with SSMA and SmSMA was significantly lower than that mixed with naphthalene condensate (NSC). The compressive strength of the hardened cement mortars containing 0.5% copolymers after 28 days curing was examined. The compressive strength of hardened cement mortar containing SSMA and SmSMA was increased up to 32% and 13%, respectively, when compared to the plain. As the results, the copolymers (SSMA and SmSMA) used in this study are greatly expected as a good high range water reducers for the concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.116-117
• /
• 2018

The aim of this study is to investigate the properties of hardened mortar with chlorine by-pass system(CBS) in cement production in blast furnace slag(BS) mixed cement. Compressive strength had a tendency to be increased when the CBS Dust was replaced by 10% at the BS replacement rate of 0%. The 65% combination of BS showed a tendency to decrease as the CBS Dust exchange rate increases. Flexural strength was reduced as CBS Dust exchange rate increases in BS replacement ratio of 0%. The use of 5% of CBS dust can contribute to enhance the quality of non reinforced concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.392-397
• /
• 1998

In this paper, the properties of cement mortar used recycled aggregate are analyzed and compared with river and crushed sand mortar. Recycled aggregates are made by crushing wasted concrete had various compressive strength, and test items are the properties of fresh mortar, hardened mortar and durability. According to the experimental results, flow, unitweight, strength and durability of cement mortar used recycled aggregates decrease compared with those of river and crushed sand mortar.

• 한국세라믹학회지
• /
• 제34권5호
• /
• pp.449-452
• /
• 1997

Quick hardened property and compressive strength experimented to the C4A3 quantities. Workability experimented to the hydration behavior as retarder added to the C4A3. Compressive strength reached {{{{ delta }}3h=300~350 kgf/$\textrm{cm}^2$, {{{{ delta }}6h=400~450 kgf/$\textrm{cm}^2$, {{{{ delta }}24h=500~550 kgf/$\textrm{cm}^2$. Flow loss rate reached 70.1% to retarder addition 0.12% after 15 min. Test items were SEM, XRD, TG-DTA, MCC, porosity and zeta potential.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.69-72
• /
• 1999

In this study, we blended 2 grades of ultra fine cement using the results of previous stud. And the cement slurry was produced by water each water/cement ratio. The slurries were observed hydration phenomena during 28 days with SEM, XRD and DSC. The specimen made by slurry were evaluated with the hardened properties such as compressive strength, flexural strength length change and water absorption. And were tested the adhesive strength of specimen made by injecting the slurry between mortar bars.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.309-323
• /
• 2014

Based on the compositions and structures of cement-based materials, the geometrical models of the tortuosity of transport paths in hardened cement pastes, mortar and concrete, which are associated with the capillary porosity, cement hydration degree, mixture particle shape, aggregate volume fraction and water-cement ratio, are established by using a geometric approach. Numerical simulations are carried out to investigate the effects of material parameters such as water-cement ratio, volume fraction of the mixtures, shape and size of aggregates and cement hydration degree, on the tortuosity of transport paths in hardened cement pastes, mortar and concrete. Results indicate that the transport tortuosity in cement-based materials decreases with the increasing of water-cement ratio, and increases with the cement hydration degree, the volume fraction of cement and aggregate, the shape factor and diameter of aggregates, and the material parameters related to cement pastes, such as the water-cement ratio, cement hydration degree and cement volume fraction, are the primary factors that influence the transport tortuosity of cement-based materials.