• Elastomers and Composites
• /
• v.40 no.4
• /
• pp.249-257
• /
• 2005

Polyurethane(PU) prepolymers were prepared from polyol and diisocyanate. Unionized PU prepolymers were synthesized from poly(propylene glycol)(PPG, MW: 1000), 2,2-bis (hydroxymethyl) propionic acid(DMPA), and isophorone diisocyanate(IPDI) by prepolymer syhthesizing process. After PU prepolymers were dispersed into water, the physical properties were investigated by changing the molar ratio of polyol and diisocyanate. The results showed a stable state with the best physical properties when the prepolymer was composed of PPG/DMPA with hard segment=40%, NCO%=3.43%, [NCO]: [OH]=1.5: 1.0 in molar ratio, and was dispersed into water with 30% solid content. PU prepolymers also were synthesized with various molar ratio of PPG and DMPA. Upon higher molar ratio of DMPA, particle size of polyurethane dispersion(PUD) gradually decreased. PU-prepolymers prepared from the various blocking agents represented characteristic initial deblocking temperatures that depended on the blocking agents, and the beginning of deblocking occured within 30 mins on all the blocking agents used.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.366-371
• /
• 1995

High performance magnetic materials are characterized by the combination of outstanding magnetic properties and optimized microstructures, e.g., nanocrystalline composites of multilayers and small particle systems. The characteristic parameters of the hysteresis loops of these materials vary over more than a factor of $10^{6}$ with optimum values for the coercive field of several Tesla and permeabilities of $10^{6}$. Within the framework of the computational micromagnetism (nanomagnetism) using the finite element method the upper and lower bounds of the coercive field of different types of grain ensembles and multilayers have been determined. For the case of nanocrystalline composites the role of grain size, exchange and dipolar coupling between grains and the degree of grain alignment will be discusses in detail. It is shown that the largest coercivities are obtained for exchange decoupled grains, whereas remanence enhancing requires exchange coupled grains below 20 nm. For composite permanent magnets based on $Nd_{2}Fe_{14}B$ with an amount of ~ 50% soft $\alpha$-Fe-phase coercivities of ${\mu}_{0}H_{c}=0.75\;T$, a remanence of 1.5 T and an energy product of $400\;kJ/m^{3}$ is expected. In nanocrystalline systems the temperature dependence of the coercivity is well described by the relation ${\mu}_{0}H_{c}=(2\;K_{1}/M_{s}){\alpha}-N_{eff}{\mu}_{0}M_{s}$, where the microstructural parameters $\alpha$ and $N_{eff}$ take care of the short-range perturbations of the anisotropy and $N_{eff}$ is related to the long-range dipolar interactions. $N_{eff}$ is found to follow a logarithmic grain size size dependence ${\mu}_{0}H_{c}=(2\;K_{1}/M_{s}){\alpha}-N_{eff}(\beta1nD){\mu}_{0}M_{s}$. Several trends how to achieve the ideal situation $\alpha$->1 and $N_{eff}$->1->0 will be discussed.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.517-526
• /
• 2011

Soil structure plays an important role in ecological system, since it controls transport and storage of air, gas, nutrients and solutions. The study of soil structure requires an understanding of the interrelations and interactions between the diverse soil components at various levels of organization. Investigations of the spatial distribution of pore/particle arrangements and the geometry of soil pore space can provide important information regarding ecological or crop system. Because of conveniences in image analyses and accuracy, these investigations have been thrived for a long time. Image analyses from soil sections through impregnated blocks of undisturbed soil (2 dimensional image analyses) or from 3 dimensional scanned soils by computer tomography allow quantitative assessment of the pore space. Image analysis techniques can be used to classify pore types and quantify pore structure without inaccurate or hard labor in laboratory. In this paper, the last 50 years of the soil image analyses have been presented and measurements on various soil scales were introduced, as well. In addition to history of image analyses, a couple of examples for soil image analyses were displayed. The discussion was made on the applications of image analyses and techniques to quantify pore/soil structure.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.10
• /
• pp.51-56
• /
• 2011

This study was conducted to investigate the applicability of pulsed electric field (PEF) treatment for the prevention of scaling formation and membrane fouling reduction. To validate the effect of PEF and to identify the mechanism, some experiments with and without PEF treatment were carried out. PEF treatment affected the precipitation of $CaCO_3$ by which $CaCO_3$ particles were actively grown and sedimented. It was confirmed that the calcium ions were decreased as 78% and particle size was grown by PEF treatment. It was also verified that the crystalline structure of $CaCO_3$ was transformed by PEF treatment from Aragonite, which is formed at a high temperature and hard to be removed, to Calcite being stable at room temperature. In PEF treatment, permeate volume and permeation flux were greater than that of without PEF, case while Langelier Index(LI) decreased. From the experiment results, PEF treatment is believed to be an effective method to prevent scaling formation and to mitigate $CaCO_3$ fouling as the pretreatment of membrane filtration.

• Journal of Information Science Theory and Practice
• /
• v.10 no.spc
• /
• pp.56-65
• /
• 2022

Korea Institute of Science and Technology Information (KISTI) is a Worldwide LHC Computing Grid (WLCG) Tier-1 center mandated to preserve raw data produced from A Large Ion Collider Experiment (ALICE) experiment using the world's largest particle accelerator, the Large Hadron Collider (LHC) at European Organization for Nuclear Research (CERN). Physical medium used widely for long-term data preservation is tape, thanks to its reliability and least price per capacity compared to other media such as optical disk, hard disk, and solid-state disk. However, decreasing numbers of manufacturers for both tape drives and cartridges, and patent disputes among them escalated risk of market. As alternative to tape-based data preservation strategy, we proposed disk-only erasure-coded archival storage system, Custodial Disk Storage (CDS), powered by Exascale Open Storage (EOS), an open-source storage management software developed by CERN. CDS system consists of 18 high density Just-Bunch-Of-Disks (JBOD) enclosures attached to 9 servers through 12 Gbps Serial Attached SCSI (SAS) Host Bus Adapter (HBA) interfaces via multiple paths for redundancy and multiplexing. For data protection, we introduced Reed-Solomon (RS) (16, 4) Erasure Coding (EC) layout, where the number of data and parity blocks are 12 and 4 respectively, which gives the annual data loss probability equivalent to 5×10^-14. In this paper, we discuss CDS system design based on JBOD products, performance limitations, and data protection strategy accommodating EOS EC implementation. We present CDS operations for ALICE experiment and long-term power consumption measurement.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.2
• /
• pp.109-114
• /
• 2008

Though ethanol can theoretically generate 12 electrons during oxidation to carbon dioxide, the complete oxidation of ethanol is hard to achieve due to the strong bond between the two carbons in its molecular structure. Therefore, development of high activity catalyst for ethanol oxidation is necessary for the commercialization of direct ethanol fuel cell. In this study, some binary and ternary electrocatalysts of PtSn/C and PtSnAu/C have been synthesized and characterized. The catalysts were fabricated with modified polyol method with the amounts of 20 wt%, where the Pt : Sn ratios in the PtSn/C were 1 : 0, 4 : 1, 3 : 1, 2 : 1, 1.5 : 1, 1 : 1, 1 : 1.5 and Pt:Sn:Au ratios in the PtSnAu/C were 5 : 5 : 0, 5 : 4 : 1, 5 : 3 : 2, 5 : 2 : 3. From the XRD and TEM analysis results, the catalysts were found to have face centered cubic structure with particle size of around $1.9{\sim}2.4\;nm$. The activity in the ethanol oxidation was examined with cyclic voltammetry and the results indicated that PtSn(1.5 : 1)/C and PtSnAu(5 : 2 : 3)/C had the highest activity in each catalyst system. Further tests with single cell were performed with those catalysts. It was found that PtSn/C(1.5 : 1) exhibited the best performance while the long term stability of PtSnAu/C(5 : 2 : 3) is better than PtSn/C(1.5 : 1).

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.4
• /
• pp.373-378
• /
• 1999

This study was conducted to investigate the effects of application of the dolomite particles and the shell powder on soil characteristics, dry matter yield and nutritive value of forage in sandy loam soil at the Experimental Field of National Livestock Research Institute, Suweon, from 1994 to 1996. This was compared with control, lime, dolomite 0.5mm, 2.0mm, 4.0mm, and shell powder in mixed pasture. Although there was no significant difference, average dry matter yield for 3 years was increased with the application of lime, dolomite 2.0mm, 0.5mm, control, 4.0mm and shell powder in order. Average crude protein yield of forages was increased with the application of dolomite 2.0mm, 0.5mm, control, lime, shell powder and 4.0mm in order. Lime requirement was slightly increased from 2,410 to 4,853kg per ha with the lapse of time. Although soil hardness was optimum level by second year, it was apt to become hard little by little. Solid phase of soil was lowered with dolomite 0.5mm treatment. The results demonstrated that dolomite and shell powder could be settled a dust problem in farms and a coast pollution as lime substitutes for soil improvement. Therefore, it is desirable for dry matter yield and crude protein yield to applicate the dolomite 2.0mm every 3 years and the shell powder more frequently in sandy loam soil.

• Analytical Science and Technology
• /
• v.26 no.4
• /
• pp.245-255
• /
• 2013

Identification of paint on victim's clothing and a vehicle are valuable for forensic examination when investigating hit-and-run accidents. Automotive paints on clothes are used to prove a victim caused by traffic accident and to identify a suspected vehicle. The comparison of transferred paints between victim's vehicle and suspected vehicle can be an important evidence in reconstructing the accident situation and in discovering the truth. The paints such as white, yellow, red, blue, or black are hard to examine particle shape under a stereomicroscope because of it is not included aluminum, pearl, and mica flakes in the pigments. The aim of this study under forensic aspect is to compare pigment among basecoat layers of solid paints by identifying inorganic elemental compositions and binder resins of pigments using by micro-FT-IR and micro-XRF spectrometer. The pigment samples were analyzed by using two methods of FT-IR: Reflectance and ATR method. Two methods of FT-IR were useful in discriminating binder resins of pigments by comparing characteristic peaks and patterns of spectra. Also, XRF spectrometer could identify the elemental compositions in inorganic pigments of trace paints which are difficult to compare the identification by FT-IR.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.4
• /
• pp.267-275
• /
• 2002

A self-microemulsifying drug delivery system (SMEDDS) was developed to increase the dissolution rate, solubility, and ultimately bioavailability of a poorly water soluble drug, lovastatin. SMEDDS was thε mixtures of oils, surfactants, and cosurfactants, which emulsify under conditions of gentle agitation, similar to those which would be encountered in the gastro-intestinal (GI) tract. Various types of self-emulsifying formulations were prepared using four types of oil (Capryol 90, Lauroglycol 90, Labrafil M 1944 CS and Labrafil M 2125), two surfactants (Cremophor EL and Tween 80), and three cosurfactants (Carbitol, PEG 400 and propylene glycol). Thε efficiency of emulsification was studied using a laser diffraction size analyzer to determine particle size distributions of the resultant emulsions. Optimized formulations selected for bioavailability assessment were Carpryol 90 (40%), Cremophor EL (30%) and Carbitol (30%). SMEDDS containing lovastatin (20 mg and 5 mg) were compared to a conventional lovastatin tablet $(Mevacor^{\circledR},\;20\;mg/tab)$ by the oral administration as prefilled hard gelatin capsules to fasted beagle dogs for in vivo study. The arεa under the serum concentration-time curve from time zero to the last measured time in serum, $AUC_{0{\rightarrow}24h}$, was significantly greater in SMEDDS, suggesting that bioavailability increase 130% and 192% by the SMEDDS, respectively. The self-emulsifying formulations of lovastatin afforded the improvement in absolute oral bioavailability relative to previous data of lovastatin tablet formulation. These data indicate the utility of dispersed self-emulsifying formulations for the oral delivery of lovastatin and potentially other poorly absorbed drugs.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.5917-5935
• /
• 2012

Background: Hepatitis C virus (HCV) causes acute and chronic human hepatitis infection and as such is an important global health problem. The virus was discovered in the USA in 1989 and it is now known that three to four million people are infected every year, WHO estimating that 3 percent of the 7 billion people worldwide being chronically infected. Humans are the natural hosts of HCV and this virus can eventually lead to permanent liver damage and carcinoma. HCV is a member of the Flaviviridae family and Hepacivirus genus. The diameter of the virus is about 50-60 nm and the virion contains a single-stranded positive RNA approximately 10,000 nucleotides in length and consisting of one ORF which is encapsulated by an external lipid envelope and icosahedral capsid. HCV is a heterogeneous virus, classified into 6 genotypes and more than 50 subtypes. Because of the genome variability, nucleotide sequences of genotypes differ by approximately 31-34%, and by 20-23% among subtypes. Quasi-species of mixed virus populations provide a survival advantage for the virus to create multiple variant genomes and a high rate of generation of variants to allow rapid selection of mutants for new environmental conditions. Direct contact with infected blood and blood products, sexual relationships and availability of injectable drugs have had remarkable effects on HCV epidemiology. Hundreds of thousands of people die each year from hepatitis and liver cancer caused by HCV virus infection. Approximately 80% of patients with acute hepatitis C progress into a chronic disease state leading to serious hepatic disorders, 10-20% of which develop chronic liver cirrhosis and hepatocellular carcinoma. The incubation period of HCV is 6-8 weeks and the infection is often asymptomatic so it is very hard to detect at early stages, making early treatment very difficult. Therefore, hepatitis C is called a "silent disease". Neutralizing antibodies are produced against several HCV proteins during infection but the virus mutates to escape from antibodies. Some patients with chronic hepatitis C may have some symptoms such as fatigue, muscle aches, nausea and pain. Autoimmune and immunecomplex-mediated diseases have also been reported with chronic HCV infection.