• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.5
• /
• pp.113-121
• /
• 2010

Shumi-sen(須彌山), built by Nohjagong(路子工) in the southern garden of the Palace Garden during the Asuka Period, is understood as being Sumeru based on an Indian perspective of the theory of the origin of universe. It is also viewed as Mt. Myogoh from a Chinese Buddhist worldview. It is thought to be a type of assembled stone structure with Poong-ryoon (風輪)-Su-ryoon(水輪)-Geum-ryoon(金輪)-Ji-ryoon(地輪) carved into each of the 4 stone pieces. These building shapes are thought to have been utilized as stone for exterior construction as opposed to those structures built during the Shilla Period of China and Korea. Aside from Nohjagong's record of Shumi-sen, most of the records from Japan's period of the time suggest that Shumi-sen was an important element that played a role in the scenery of the seasonal outdoor gardens. It is also thought, from the sentences and expressions surrounding the records, that a combination of the seasonal sceneries was utilized centered on Shumi-sen, and that they were all used during festival events. From a perspective of analysis and interpretation dependent on the limited literature and on observation, it cannot be verified whether the Mt. Sumeru Stone(須彌山石) excavated from the Stone God Ruins is the same Shumi-sen that Nohjagong built along with Okyo(吳橋), but it is thought that the 'Shumi-sen type stone structure' that was later built repeatedly as part of the palace garden facilities is identical to the Shumi-sen built at the Imperial Palace's southern garden, or at least a re-built structure based on the Shumi-sen that Nohjagong built with stones and ponds used to create the foundation. Thus, Shumi-sen that Nohjagong supposedly built along with Okyo is suspected to be a figurative rock arrangement and, at the same time, a miniaturized scenic rock arrangement(縮景樹石) that maximized the shape of Buddhism's Shumi-sen. On the other hand, the surface pattern on Mt. Sumeru Stone is very similar to the multi -layers of mountainous pattern icons expressed in the patterns of the Great Golden Incense Burner(百濟金銅大香爐) or Mountain-Water Scenery Sculptural Brick(山水山景紋?) that were built during the Baekjae pcriod aod the rear side of Hwalsuk-jebul Basal Byungipsang(滑石諸佛菩薩竝立像); it is suspected that similar patterns would have been used if patterns were made on Shumi-sen that Nohjagong built. Also in consideration of the physical theory of MI. Sumeru Stone, the Siphon theory of using a pressure difference in water level was applied to the fountain facilities of Mt. Sumeru Stone that seemed to have been built from the practical rock arrangement perspective for the purpose of feasts, etc.

• Journal of the Korean Institute of Navigation
• /
• v.4 no.2
• /
• pp.45-79
• /
• 1980

The aim of this paper is to analyze the mechanics of price formation in the tramp shipping. For the purpose of this study, the main characteristics of tramp freight rates and the market is examined, and a brief examination of the nature ofthe costs of operation is given which are essential for the understanding of the functioning of shipping firms as well as for the understanding of developments in the tramp freight market. The demand and supply relationships in the market is also analysed in detail. Tramp shipping is an industry that has a market which functions under conditions that are not dissimilar to the theoretical model of perfect competition. However, it does notmean that tramp shipping market is a perfectly competitive market. It is apparent that this realworld competitive system has its imperfections, which means that the market for tramp shipping is near to being a perfectly competitive market on an internaitonal scale and it is freight are therefore subjext to the laws of supply and demand. In theory, the minimum freight rate in the short term is that at which the lowest cost vessels will lay-up in preference to operating, and is equal to the variable costs minus lay-up costs; and this would imply that in all times except those of full employment for ships there is a tendency for newer low-cost, and, probably, faster vessels to be driving the older high-cost vessels in the breaker's yards. In this case, shipowners may be reluctant to lay-up their ships becasue of obligations to crews, or because they would lose credibility with shippers or financiers, or simply because of lost prestige. Mainly, however, the decision is made on strictly economic grounds. When, for example, the total operating costs minus the likely freight earnings are greater than the cost of taking the ship out of service, maintaining it, and recommissioning it, then a ship may be considered for laying-up; shipowners will, in other words, run the ships at freight earnings below operating costs by as much as the cost of laying them up. As described above, the freight rates fixed on the tramp shipping market are subject to the laws of supply and demand. In other words, the basic properties of supply and demand are of significance so far as price or rate fluctuations in the tramp freight market are concerned. In connection with the same of the demand for tramp shipping services, the following points should be brone in mind: (a) That the magnitude of demand for sea transport of dry cargoes in general and for tramp shipping services in particular is increasing in the long run. (b) That owning to external factors, the demand for tramp shipping services is capable of varying sharphy at a given going of time. (c) The demad for the industry's services tends to be price inelastic in the short run. On the other hand the demand for the services offered by the individual shipping firm tends as a rule to be infinitely price elastic. In the meantime, the properties of the supply of the tramp shipping facilities are that it cannot expand or contract in the short run. Also, that in the long run there is a time-lag between entrepreneurs' decision to expand their fleets and the actual time of delivery of the new vessels. Thus, supply is inelastic and not capable of responding to demand and price changes at a given period of time. In conclusion, it can be safely stated that short-run changes in freight rates are a direct result of variations in the magnitude of demand for tramp shipping facilities, whilest the average level of freight rates is brought down to relatively low levels over prolonged periods of time.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.3
• /
• pp.38-49
• /
• 2016

This study is based on the assumption that the documentations, and poetry form a basis for undertone of the location and original landscape explored by inference and enjoyment aspects; the significance has been inferred by investigating the original location, relocated location, and the original landscape of Imsil Manchwi Pavilion. The results of the attempted research for locational value, and preservation of the original landscape before and after the relocation of Imsil Manchwi Pavilion is as follows. Firstly, Manchwi, meaning evergreen, was made a pseudonym of KimWi. The name reflects an image two evergreen pine trees facing one another. The poetry form presents the eternal fidelity. In addition, considering the symbolic plant and the meaning of evergreen pine trees specified on the pavilion, the name is derived from the fidelity, longevity of the family, vitality and so on. Secondly, Manchwi Pavilion was founded in the location, known as the snakehead form, that represents the vitality. Snake faces the swallow form over the river, therefore, it connotes the wishes for fidelity and prosperity of the family. Manchwi Pavillion is prostrate pheasant form which is suitable for those who look for a hiding place or place for their study. It is noticeable that the location infers and hand down the efforts on succession for prosperity of the family and the study. Thirdly, it is estimated that Manchwi Pavilion was established between 1572 and 1582; and the relocation was conducted in the late 1880s. Fourthly, although eternal fidelity was presented in Manchwi Pavillion with locational language, the Manchwi Pavillion after its relocation next to KimWi's grave implies the tendency of the changed value: the commemoration of the ancestors, and prosperity of the family. Fifthly, after the relocation of the pavilion, the proportion of the rooms with Korean heating system, so-called'Ondol'has been increased for its best use in all seasons. And its veranda for extension and its verse couplet implies that this connote the original meaning and pursuit of the study. Sixthly, the way that the poetry portrays pine trees, pond, plants, valleys, and streams shows the aspect of enjoyment of the landscapes and the meaning of fidelity, pure mind, free and easy life, self-examination, the frailty of human life. Lastly, despite the difference between tenth poetic language of three Sipyoung and Wonwoon Sipyeong, exploring the landscape based on the analysis on the poetry can be a basis on the maintenance and restoration of the original landscape as the inspiration and the meaning show that Wonwoon Sipyeong maintains the aspect of the author enjoying original landscape.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.88-99
• /
• 2018

After UNESCO appointed Royal Tombs of the Joseon Dynasty to be World Cultural Heritages(2009), Cultural Heritage Administration in Korea established Management Office of Royal Tombs of the Joseon Dynasty(2012) and conducted Mid to Long-Term Plan on Conservation, Management, Utilization of World Heritage 'Royal Tombs of the Joseon Dynasty(2015)'. The report, as an implementation plan, provides detailed contents of the maintenance planning of Royal Tombs of the Joseon Dynasty. From this background, with a view to comprehending the characteristics of the maintenance planning of trees in historical landscape forests, this study extracted the contents related to the historical landscape forests of the 40 Royal Tombs of the Joseon Dynasty from the "Mid to Long-term Plan" and conducted literature research. The results of the study are as follows. First, from 2016, the short-term plans have provided detailed contents on logging, transplanting and planting trees in the plans divided by stages. On the other hand, the long-term plans, instead of presenting abstract contents repeatedly for each royal tomb, should seek vegetation landscape that each royal tomb should aim for. Second, since the areas that are in charge of the various functions of the royal tombs have been subjects to the maintenance planning, it is effective to establish a maintenance planning by separating functional areas instead of the comprehensive concept as historical landscape forests. Third, the maintenance planning of trees in historical landscape forest of the Royal Tombs of Joseon Dynasty is based on daily management such as density control and maintaining the shape of trees, which is necessary to sustain the forest. Also, due to the goal of preserving the pine forest, which is recognized as a prototype vegetation landscape, foreign species and other trees have been more cut down. With a few limited types of tall tree but few shrubs and flowers, it is characterized that the orientation toward aesthetic landscapes is insufficient in large green spaces. Fourth, according to the function of the tomb, it is divided into entrance area, ceremonial area, burial area and outer forest, and the contents of the maintenance planning are analyzed by basic conditions of tree management: prototype, ecology, functionality, and aesthetics. After studying the tree management characteristics of each area, four suggestions are made: understanding the diversity of trees that form prototype landscape as a management plan, sustainability of various forests adapted to ecological environment, convenience required in addition to ceremony and safety characterizing the Royal Tombs of Joseon Dynasty, and the necessity of access to aesthetic landscape on the tombs.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.11a
• /
• pp.3-4
• /
• 2000

Many researchers are interested in the synthesis and characterization of carbon nitride and diamond-like carbon (DLq because they show excellent mechanical properties such as low friction and high wear resistance and excellent electrical properties such as controllable electical resistivity and good field electron emission. We have deposited amorphous carbon nitride (a-C:N) thin films and DLC thin films by shielded arc ion plating (SAIP) and evaluated the structural and tribological properties. The application of appropriate negative bias on substrates is effective to increase the film hardness and wear resistance. This paper reports on the deposition and tribological OLC films in relation to the substrate bias voltage (Vs). films are compared with those of the OLC films. A high purity sintered graphite target was mounted on a cathode as a carbon source. Nitrogen or argon was introduced into a deposition chamber through each mass flow controller. After the initiation of an arc plasma at 60 A and 1 Pa, the target surface was heated and evaporated by the plasma. Carbon atoms and clusters evaporated from the target were ionized partially and reacted with activated nitrogen species, and a carbon nitride film was deposited onto a Si (100) substrate when we used nitrogen as a reactant gas. The surface of the growing film also reacted with activated nitrogen species. Carbon macropartic1es (0.1 -100 maicro-m) evaporated from the target at the same time were not ionized and did not react fully with nitrogen species. These macroparticles interfered with the formation of the carbon nitride film. Therefore we set a shielding plate made of stainless steel between the target and the substrate to trap the macropartic1es. This shielding method is very effective to prepare smooth a-CN films. We, therefore, call this method "shielded arc ion plating (SAIP)". For the deposition of DLC films we used argon instead of nitrogen. Films of about 150 nm in thickness were deposited onto Si substrates. Their structures, chemical compositions and chemical bonding states were analyzed by using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy and infrared spectroscopy. Hardness of the films was measured with a nanointender interfaced with an atomic force microscope (AFM). A Berkovich-type diamond tip whose radius was less than 100 nm was used for the measurement. A force-displacement curve of each film was measured at a peak load force of 250 maicro-N. Load, hold and unload times for each indentation were 2.5, 0 and 2.5 s, respectively. Hardness of each film was determined from five force-displacement curves. Wear resistance of the films was analyzed as follows. First, each film surface was scanned with the diamond tip at a constant load force of 20 maicro-N. The tip scanning was repeated 30 times in a 1 urn-square region with 512 lines at a scanning rate of 2 um/ s. After this tip-scanning, the film surface was observed in the AFM mode at a constant force of 5 maicro-N with the same Berkovich-type tip. The hardness of a-CN films was less dependent on Vs. The hardness of the film deposited at Vs=O V in a nitrogen plasma was about 10 GPa and almost similar to that of Si. It slightly increased to 12 - 15 GPa when a bias voltage of -100 - -500 V was applied to the substrate with showing its maximum at Vs=-300 V. The film deposited at Vs=O V was least wear resistant which was consistent with its lowest hardness. The biased films became more wear resistant. Particularly the film deposited at Vs=-300 V showed remarkable wear resistance. Its wear depth was too shallow to be measured with AFM. On the other hand, the DLC film, deposited at Vs=-l00 V in an argon plasma, whose hardness was 35 GPa was obviously worn under the same wear test conditions. The a-C:N films show higher wear resistance than DLC films and are useful for wear resistant coatings on various mechanical and electronic parts.nic parts.

• The Korean Journal of Physiology
• /
• v.7 no.2
• /
• pp.1-8
• /
• 1973

Though it has been reported by Clements et al. and Avery et al. that the activity of the pulmonary surfactant can be altered by the temperature changes, a conclusive evidence of the effects of temperature on the surfactant system of the lung is yet to come. In the present study, an attempt was made to observe possible effects of a few different degrees of temperature on the activity of the pulmonary surfactant of the rabbit in vivo and in vitro. The rabbit was sacrificed by blood shedding and both lungs were completely removed. The lung washings, obtained by gently lavaging the left lung with saline, was placed at 1) 4C for 1, 5, 10, 15, 30 and 40 days, and 2) 20C for 1, 2, 3, 4, 5 and 7 days for in vitro experiment. For in vivo experiment, the rabbit was placed at 4C for 4, 8, 12 and 24 hours, and the lung lavage was prepared as described above in the in vitro experiment. Tension-area (T-A) diagram of the lung lavage was recorded automatically by a modified. Langmuir-Wilhelmy balance with a synchronized recording system. The surface tensions thus obtained were compared with those of the normal rabbit, and the results are summarized as follows: 1. The maximal surface tension, minimal surface tension and stability index of the normal rabbit lung lavage were $52.5{\pm}2.3\;dynes/cm,\;4.9{\pm}2.3\;dynes/cm$ and 1.65, respectively. 2. In the group where the lung lavage was placed at 4C in vitro, the maximal and minimal surface tensions, and stability index did not show any noticeable changes comparing with the normal values up to 30 days. On the 40th day of the experiment, a tendency of a slight increase in the surface tensions was observed but the change was not significant. 3. When the lung lavage was placed at 20 C in vitro, the maximal surface tension did not show any appreciable change comparing with the normal except on the 7 th day with a slight increase. The minimal surface tension showed an increased value from the 2nd day, and on the 5 th and 7 th experimental day, markedly increased value was observed. The stability index, on the other hand. showed a marked decrease throughout the entire experiment with the value of 0.71 and 0.53 on the 5th and 7 th day, respectively. 4. In the group where the rabbit was placed at 4 C in vivo, the maximal surface tensions and stability index of the lung lavage showed little change from the normal. The minimal surface tension at 12 experimental hour showed a slight increase, but it returned to the normal value at 24 hour.

• Journal of Korean society of Dental Hygiene
• /
• v.4 no.1
• /
• pp.49-64
• /
• 2004

This study is designed to conduct a questionnaire research into the safety control and the actual condition of radiography by working with dentistry belonging to university hospitals, dental hospitals and dental clinics for three months ranging from August, 2003 to October, 2003. The researcher came to the following conclusions. 1. The research on the current condition of possessed radiational equipment shows that 61.2 percent of the subjects had one intraoral radiation medicine and that 70.1 percent of the subjects had more than one extraoral radiation medicine and that 37.3 percent of the subjects had more than one digital radiation medicine. 2. Most of intraoral radiography (82.1%) was conducted by dental hygienists, and 7.5 percent of intraoral radiography was conducted by nurse aids. On the other hand, most of extraoral radiography (76.6%) was conducted by dental hygienists and digital radiography was conducted by dental hygienists(60.6%), dentists(32.0%) and radiographer(80.0%). 3. The less-than 1-meter-long distance between cone and the radiographer accounted for 44.8 percent. And the more-than 1.6-meter-long distance accounted for no more than 13.4 percent. The exposure time per standard film which was adjusted to each part accounted for 71.6 percent. Fixing the film on the part of healthy patients accounted for 76.1 percent. Fixing the film of elderly patients and children patients by the radiographer accounted for 43.3 percent. 4. The average daily photographing frequency of standard films stood at six to ten pieces(31.3%), and the average weekly photographing frequency of bitewing films stood at less than one piece(47.8%), and the dentistries where bitewing films were not employed accounted for 25.4%. The subjects whose average weekly photographing freqeuncy of occlusal films stood at less than a piece accounted for 59.7 percent. The dentistries whose average weekly photographing frequency of pediatric films stood at one to five pieces accounted for 41.8 percent. In case of panorama & cephalo, one to five pieces on a weekly average accounted for 36.2 percent. The dentistries whose average daily photographing frequency of digital radiation medicine stood at less than 1 piece accounted for 40.0 percent. 5. The research on the use of protective clothes shows that pregnant ·women only accounted for 31.3 percent. In regard to the use of protective clothes in case of the radiographers fixing films, the cases where no protective clothes were employed accounted for 88.1 percent. The reason was said to he attributable to the trouble related to wearing the clothes(54.2%). 6. The survey on the measurement of exposure dose shows that the cases where no measurement was made accounted for 76.1 percent. As far as the measurement methods of exposure dose was concerned, the employment of film badge accounted for 68.8 percent. The subjects turned out to conduct measurement of exposure dose every third month, which accounted for 43.8 percent. The barriers to the measurement of measurement of exposure dose were attributable to the recognition that a little amount of exposure dose need not be measured(29.9%). 7. The survey on the distinction of radiation rooms and clinic rooms reveals that the cases where radiation rooms exclusively existed accounted for 67.2 percent. 43.3 percent of the subjects turned out to have only one protective garment, and 49.3 percent of the subjects proved to conduct a periodical checkup of radiational equipment. The survey on the examination certificates of radiational generators and protective facilities indicates that 80.6 percent of the subjects had the certificates. The research also shows that the subjects with the marks indicating the radiational areas accounted for 70.1 percent. And trustees turned out to handle developing solutions and fixing solutions.

• Korean Journal of Environmental Biology
• /
• v.27 no.1
• /
• pp.124-133
• /
• 2009

The study was performed to investigate the community structure of macrobenthic fauna during June 2005, in Hallyeohaesang National Park from Korea Strait. A total of 284 macrobenthic fauna were collected. The overall average macrobenthic density and biomass were 2,002 individuals m$^{-2}$ and 154.92 gWWt m$^{-2}$, respectively. Based on the Lebris (1988) index, there were 20 species accounting for approximately 47.64% of total individuals. And the highest densities were found in the polychaetes Scoletoma longifolia, Isolda pulchella, Mediomastus californiensis, Minuspio multibranchia, Tharyx sp. 1 and the bivalve Theora fragilis. On the other hand, the top twenty species made up 70.47% of the total biomass while the three most abundant, the echinoderms Schizaster lacunosus, Amphiura vadicola and the bivalve Fulvia mutica. The conventional multivariate statistics (cluster analysis and non-metric Multi-Dimensional Scaling) applied to assess spatial variation in macrobenthic assemblages. As a result of cluster analysis and nMDS ordination, this study area was divided into two different groups of stations and species. In case of station, there are two groups: one is a mud dominated station group and the other is dead shell and sand dominated group. And the 2 faunistic groups were established as follows: 1) a group of relatively higher abundances in mud dominated sediment. There were numerically dominated by the polychaetes Magelona japonica, Sternaspis scutata, Paraprionospio pinnata, Tharyx sp. 1 and the amphipods Monocorophium sinense and Eriopisella sechellensis. 2) a group of relatively higher densities dead shell and sand dominated sediment. These groups were characterized by the polychaetes I. pulchella, M. multibranchiata, the amphipods M. acherusicum, Gammaropsis japonicus and the echinoderm A. vadicola.

• Journal of the Society of Disaster Information
• /
• v.15 no.4
• /
• pp.469-478
• /
• 2019

Purpose: In this studies we examine the facilities damage characteristics caused by forest fire. Therefore, we surveyed damaged facilities from forest fire which was occurred on Goseong-Gun on march 28 in 2019.(damaged areas was 40ha) The types of facilities uses were house, public facility, warehouse and so on. 17 facilities were destroyed. The purpose of this study was to for establishing a disaster safety village in rural areas where damage from a similar type of disaster occurs repeatedly by conducting the consciousness survey targeting at experts and disaster safety officials in a local government. Method: We surveyed meteorological factors(temperature, wind speed, wind direction, humidity) per a minute for analyzing weather condition on Goseong-Gun when forest fire was occurred, spread and extinguished. And we surveyed forest fire risk factors(a slope degree, a slope direction, a geographical feature, a distance between forest and facility, main species, the existence of crown fire ignition, the direction of facility, the main material of building) around 10 damaged facilities. Finally, we analyzed damage pattern of facilities using meteorological factor and forest fire reisk fator Result: The weather condition of Kanseonng AWS (No.517) was high temperature, arid and strong wind, when the forest fire was occurred and spread. An average wind speed was 4.1m/s and the maximum wind speed was 11.6m/s. The main direction of wind was W(225~315°). Damaged facilities were located on the steep slope area and on the mountaintop. The forest density around facilities was high and main species was korean red pine. The crown fire was occurred in the forest around damaged facilities. The average distance was 13.5m from forest to facilities. When the main matarial of building was made by fire resistance materials (for example, rainforced concrete), the damage was slightly. on the other hand, when by flammable material (for example, a Sandwich Panel), the facilities were totally destroyed Conclusion: The results of this research which were the thinning around house, making a safety distance, the improvement of main material of building and etc, will be helpful for establishing a counter measure for a forest fire prevention of facilities in wild land urban interface

• Restorative Dentistry and Endodontics
• /
• v.35 no.5
• /
• pp.368-373
• /
• 2010

Objectives: This study investigated the effect of infection control barrier thickness on power density, wavelength, and light diffusion of light curing units. Materials and Methods: Infection control barrier (Cleanwrap) in one-fold, two-fold, four-fold, and eightfold, and a halogen light curing unit (Optilux 360) and a light emitting diode (LED) light curing unit (Elipar FreeLight 2) were used in this study. Power density of light curing units with infection control barriers covering the fiberoptic bundle was measured with a hand held dental radiometer (Cure Rite). Wavelength of light curing units fixed on a custom made optical breadboard was measured with a portable spectroradiometer (CS-1000). Light diffusion of light curing units was photographed with DSLR (Nikon D70s) as above. Results: Power density decreased significantly as the layer thickness of the infection control barrier increased, except the one-fold and two-fold in halogen light curing unit. Especially, when the barrier was four-fold and more in the halogen light curing unit, the decrease of power density was more prominent. The wavelength of light curing units was not affected by the barriers and almost no change was detected in the peak wavelength. Light diffusion of LED light curing unit was not affected by barriers, however, halogen light curing unit showed decrease in light diffusion angle when the barrier was four-fold and statistically different decrease when the barrier was eight-fold (p < 0.05). Conclusions: It could be assumed that the infection control barriers should be used as two-fold rather than one-fold to prevent tearing of the barriers and subsequent cross contamination between the patients.