• Journal of Periodontal and Implant Science
• /
• v.41 no.1
• /
• pp.10-16
• /
• 2011

Purpose: Avulsed tooth can be completely recovered, if sound periodontal ligament (PDL) of tooth is maintained. Although a lot of storage solutions have been explored for the better storage of avulsed tooth, there is a shortcoming that the preservation time is much short. On the other hand, there has been studies that (-)-epigallocatechin-3-gallate (EGCG), the most abundant polyphenol in green tea, which is related to the anti inflammatory, antioxygenic, and antibacterial effects, allows the successful preservations of tissues and cells. This study evaluated the effect of EGCG on avulsed-teeth preservation of Beagle dogs for a period of time. Methods: The atraumatically extracted teeth of Beagle dogs were washed and preserved with 0/10/$100\;{\mu}M$ of EGCG at the time of immediate, period 1 (4 days in EGCG-contained media and additional 1 day in EGCG-free media), period 2 (8 days in EGCG-contained media and additional 2 days in EGCG-free media) and period 3 (12 days in EGCG-contained media and additional 2 days in EGCG-free media). Then, the cell viabilities of preserved teeth was calculated by dividing optical density (OD) of 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay with OD of eosin assay to eliminate the measurement errors caused by the different tissue volumes. Results: From the results, the immediately analyzed group presented the highest cell viability, and the rate of living cells on teeth surface decreased dependent on the preservation period. However, the $100\;{\mu}M$ of EGCG-treated group showed statistically significant positive cell activity than EGCG-free groups throughout preservation periods. Conclusions: Our findings showed that $100\;{\mu}M$ EGCG could maintain PDL cell viability of extracted tooth. These results suggest that although EGCG could not be a perfect additive for tooth preservation, it is able to postpone the period of tooth storage. However, further in-depth studies are required for more plausible use of EGCG.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.259-272
• /
• 2019

Steel-concrete single-leaf blast-resistant doors are protective structures consisting of a steel box and reinforced concrete slab. By the domestic blast-resistant doors, the structure is not designed efficiently because few studies have examined the effects of variables, such as the blast pressure, rebar ratio, and steel plate thickness on the structural behavior. In this study, the structural behavior of the doors was analyzed using the FE method, and the support rotation and ductility ratio used to classify the structural performance were reviewed. The results showed that the deflection changes more significantly when the plate thickness increases than when the rebar spacing is a variable. This is because the strain energy absorbed by the door is reduced considerably when the plate thickness increases, and as a result, the maximum deflection becomes smaller. According to a comparison of the calculated values of the support rotation and the ductility ratio, the structural performance of the doors could be classified based on the support rotation of one degree and ductility ratio of three. On the other hand, more explosion tests and analytical studies will be needed to classify the damage level.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.283-290
• /
• 2020

Porous asphalt pavement is used widely in advanced countries to reduce traffic accidents and noise. On the other hand, it is not applied widely in Korea due to concerns about its durability. This study aims to find a statistical method to improve the durability of porous asphalt pavement. A Cantabro test was selected to test the durability. The Cantabro test was performed on an asphalt mixture made of a binder and aggregate. This test was repeated three times for each of the four groups to obtain the Cantabro loss rate. The average values of each of the four groups satisfied all the reference values. In addition, through an analysis of variance (ANOVA), it was possible to quantitatively classify test groups with differences in durability, thereby finding problems and improving the durability. Furthermore, the Pay Factor method can lead to voluntary improvements in quality, and the Pay factor can be calculated through statistical analysis of limited data. Through the Pay factor, it is possible to induce definite quality improvement of the contractor and continuously improve the durability of the porous asphalt mixture by evaluating the adequacy of the quality standard.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.917-924
• /
• 2015

In this study, we study that the video attributes captured by built-in camera in smart-phone can effect on the quality of PPG signal. The conditions of video attributes were composed of the bitrate, the resolution, the flash. As each condition, we measured a change in the red value of the video image and calculated a PPI(Pulse to Pulse Interval) for extracting the pulse wave signal. 20 subjects participated in the experiment and this experiment was carried out 18 tasks. The PPG signal was measured simultaneously for two minutes with the PPG sensor in the middle finger and Smart-phone in the forefinger of the right hand. By proceeding the correlation analysis, we obtained the highest correlation condition(83%, p=0.01), which the resolution was $640{\times}480$, bitrate was 5000kbps, flash was on. As a result, this study will be a useful guide for quality of signals in the pulse signal measurement system using built-in camera in smart-phone.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.2
• /
• pp.237-241
• /
• 2010

Many policies have been implemented to mitigate the greenhouse gases in atmosphere overall of sectors. With considering the distinct characteristics of the food security, agricultural sector is no exception to this situation. To this regard, total amount of carbon which is emitted through all of the agricultural production process is calculated, and being based on this result, the demand for the introduction of agricultural production system with low carbon has been rising. Case studies on the application of life cycle assessment (LCA) technique to agricultural sector are found in many countries. For example, life cycle inventory (LCI) data bases of crop, farm infrastructure, fertilizer, farm machinery, and etc., have been constructed and provided by Ecoinvent (Swiss centre for life cycle inventories) of Swiss. In Japan, Top-down typed LCA methodology for agriculture is developed based on the inter-industry analysis, and is evaluated according to the productive method of crop. On the other hand, environmental impact assessment of agricultural system using LCA in Korea is just in the beginning stages. So it is required to assess environmental impact on agricultural fertilizer and pesticide, and to develop their flow modeling, and methodology of LCA of agricultural sector. Environmental impact assessment on agricultural materials, machinery, and infrastructure will also be carried out.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.203-212
• /
• 2010

The aim in this study is used to develop the remediation technologies for contaminated ground water. Slug, single well pumping and step-drawdown tests have been used to obtain hydraulic parameter estimates in the field. Slug tests yield hydraulic conductivity values using the Bouwer and Rice and C-B-P analysis methods. The mean and median hydraulic conductivity values of Bouwer and Rice method are $4.48{\times}10^{-3}$ and $1.16{\times}10^{-3}cm/sec$, respectively. On the other hand, C-B-P method gave mean and median hydraulic conductivity values of $2.37{\times}10^{-3}$ and $7.09{\times}10^{-4}cm/sec$, respectively. These analyses show a trend for the Bouwer and Rice method to yield lower hydraulic conductivity values in low permeability zones of granite in the study area. Sing well pumping test data were calculated through type curve in GW7, GW12 and MW9 wells. It could be interpreted that the differences of hydraulic conductivity and transmissivity values between GW7 and GW12, MW9 is related with fault clays and fractures in the bedrock among the wells. Step-drawdown tests were carried out in the KDPW1 and KDPW2 wells. The hydraulic parameter of KDPW1 and KDPW2 showed very litter difference between the values. The study of hydraulic parameter estimates can be used to purify in contaminated groundwater.

• Journal of Astronomy and Space Sciences
• /
• v.21 no.4
• /
• pp.505-528
• /
• 2004

We have reproduced the records of lunar occultation recorded in the History of Three Kingdoms(삼국사기), the History of the Koryo Dynasty (고려사), the Annals of the Choson Dynasty (朝鮮王朝實錄), the Daily Records of Royal Secretariat of the Choson Dynasty (승정원일기), and obtained the epochs of their realizations. We analysed these results to understand how the system of hours had been kept and when a day began. During most of the periods encompassed by these annals, the 12 double hours(12진각법) and the system of 100 divisions of the day (백각법) had been used when the lunar and the solar eclipses were calculated by royal astronomers. In these systems, the starting point of a day is midnight. On the other hand, the five watch system of hours (경점법), in which a night is divided into five watches, was also used. In this system, a day begins at the sunrise. We found that the traditional twilight, called dusk and dawn (혼명) and used in the east Asian countries, largely corresponds to the nautical twilight in modern concepts. This fact means that the Korean expressions and words for time system in every day life had originated form the five watch system of hours. We pointed out that the sunrise and sunset were convenient boundary lines to ancient astronomers, as well as to farmers in the agricultural society. Our results can be used to determine the exact epoch of each astronomical record in chronicles.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.22 no.4
• /
• pp.49-55
• /
• 1986

The authors carried out an experiment to determine the horizontal opening of the mid water trawl gear, which is the same as was used in the foreward experiment concerned to the attitude and opening efficiency of otter board. The trawl net .used in the experiment was designed to have a square sectional four-seamed body with two three-sepenlted wings. Each wing tip was rigged with a net pendant of 70 m long and the fore ends of the pendants were directly jointed to the otter pendant without inserting hand rope, and a front weight of 200 kg weigh was rigged with in front of the lowest wing tip. To determine the opening between otter boards ani between wing tips, two 50 KHz fish finders were set sideways on the otter board and on the port middle wing tip so as to detect the distance froa the finders to the starboard otter board and to the wing tip respectively, and the informations were transmitted to the indicators onboard the ship through water-tight cables. The results obtained can be summarized as follows: 1. The openings between otter borads were 43-45 m in case of the warp 100 m, 53-55 m in the war;> 150 m and 54-59 m in the warp 200 m. It was increased in linear according to the increase of towin; speed in the range of 1. 1-1. 8 mlscc. 2. The determined values of the openings between otter boards were greater than the estimated values. which were calculated by the opening between warps at the gallows of the ship and the length of tt~ warp, assuming that the warps from the top rollers to the otter boards were straight. The rates of the determined values to the estimated values were 1. 23-11. 0 in case of the warp 100 m, 1. 23-1. 12 in the warp 150 m and 1. 23-1. 15 in the warp 200 m respectively. The rates were almost the same at the slow towing speed of 1. 3 mlscc or so, then the higher the speed, the less the rate, and the longer the warp, the greater the rate. 3. The rates of the openings between otter boards to the total length of net pendant and the net (excluded cod end) showed 43-43% in case of the warp 150-200 m. It was a little smaller than th~ standard. which is 50%. in the common bottom trawl. 4. The determined openings between wing tips were 18-19 m in case of the warp 100m, 21-22 m in the warp 150 rn, They showed that the higher the speed, the greater the openings even though its range was no more than 1 m or so. 5. The rates of openings between otter boards to th~ openings betwee:l wing tips were almost invariably 38%. 6. The rates of openigs b2tween otter boards to the lenth of h~ad rope were 60-65% in cas': of th~ warp lOa-150m. It were much larg2r than th~ standard. which is 50%. in the common botto:n trawl.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.281-289
• /
• 2011

The purpose of this study is to identify the flow resistance of the bottom trawl net. The bottom trawl net being used in the training ship of Chonnam National University was selected as a full-scale net, and model nets such as 1/10, 1/25 and 1/50 of the actual net were made. Total resistance of the net part, the height of the net mouth and the flow resistance of components of the net such as wing, bag and cod-end part was measured, converted into full-scale and compared. Additionally, the model rule of Tauti (1934), which has been most frequently used in fishing net modeling experiments, was applied to interpret flow resistance and scale effect of model experiment was investigated. Presumed that the flow resistance R is $R=kS{\upsilon}^2$ against the flow velocity of each net ${\upsilon}$, resistance coefficient k was calculated by substituting R, ${\upsilon}$ and S of the net. From the result, it was found that k decreases exponentially when u increases which makes $k=c{\upsilon}^{-m}$. Whereas m of each net is ranged between 0.13-0.16 and there was not significant difference between nets. c does not show big difference in 1/10 and 1/25 model and the value itself was relatively bigger than in 1/50 model. The height of the net mouth of 1/25 and 1/50 model net h decreases exponentially according as ${\upsilon}$ increases to make $h=d{\upsilon}^{-n}$. Whereas d and n values were almost same in two nets. Additionally, when resistance of cod-end, wing and bag part in 1/25 and 1/50 model nets, both nets showed big resistance in bag part when flow is 1m/s as more than 60%. Wing and cod-end part showed almost same value or wing part had little bit larger value. On the other hand, when reviewing the reasons why both models showed difference in 1/50 model while c value against the resistance coefficient k did not show big difference in 1/10 and 1/25 model, it is inferred that the difference occurred not from material difference but from the difference in net size according to scale. It was judged that they are the scale effects concomitant to the model experiments.