• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.2
• /
• pp.107-117
• /
• 1992

This paper presents an improved algorithm of optimal measurement design with a reliability evaluation method for a large power system. The proposed algorithm is developed to consider the dummy bus and to achieve highest accuracy of the state estimator as well with the limited investment cost. The dummy bus in the power system is impossible to install measurement meter, while real and reactive power measurements is considered in the proposed algorithm. On the other hand, P/C model is developed by taking advantage of the matrix sparsity. The improved program is successfully tested for KEPCO system with PSS/E lineflow calculated data package.

• Proceedings of the ESK Conference
• /
• 1996.10a
• /
• pp.160-165
• /
• 1996

This paper presents the development of video-based 3-dimensional tracking system. Measurement of human motion is important in the application of ergonomics. The system uses advanced direct video measurement technology. Passive retro-reflecting markers are attached to a subject and movements of markers are observed by two CCD cameras. Infrared light emitted near the CCD cameras is reflected by the markers and is detected by the cameras. The image ae captured by Samsung MVBO2 board and the center of markers is calculated by DSP program. The position of markers are transferred from MVB02 board to the computer through AT bus. The computer then tracks the position of each marker and saves the data. This system has dynamic accuracy with 1% error and the sampling rate to 6-10 Hz, and can analyse the trajectory and speed of the marker. The results of this study can be used for operators motion analysis, task analysis, and hand movement characteristic analysis.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.548-551
• /
• 1999

We design a keyframe editor of arms and hands for 3D sign-language animation using inverse kinematics. In the previous study, we acquired only the joint angles of two arms after selecting arbitrarily the shapes of hands. In this paper, both joint angles of arms and hands are calculated by the same transformation matrix of the inverse kinematics. In the method, the design window of arm gestures can be converted into that of hand shapes by clicking a button. Experimental results show a possibility that the proposed method could be used for building up the sign-language communication dictionaries.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.2 no.3
• /
• pp.199-207
• /
• 1990

Inviscid flows in a radial turbomachine and its performance are predicted by using a pannel method. Possibility of the method to be used for design purpose is investigated. The flows in a radial turbomachine are reasonably simulated with several off-design flow rates. The diameter ratio of the rotor and inlet and outlet vane angles are systematically changed so that performance of the machine in various designs are predicted. All the predictions are shown to be in the range of Cordier curve. On the other hand, calculated slip factors are also in good agreement with values given by an empirical formula.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.1
• /
• pp.87-94
• /
• 1998

After we made the computer source code with mathematical model of Muramatsu et al. that was expressed by the set of simultaneous first-order ordinary differential equations in evaporation-pyrolysis zone of cigarette, we simulated the distribution profiles of temperature and density of flue-cured tobacco. Those equations were solved numerically with the Runge-Kutta-Gill algorithm assuming step size of 0.025mm by Muramatsu at at,, but in this study the advanced algorithm of Runge-Kutta 4th Order assuming step size of 0.0005mm. The initial conditions and physical parameters of Muramatsu et at. were used for solving them. The calculated values corresponded well with results of Muramatsu et al., especially the gradient of the temperature profile increased with smoldering speed and the thickness of the evaporation-pyrolysis zone decreased with increasing of smoldering speed. On the other hand, the temperature gradient decreased with increasing of the effective thermal-conductivity value and the thickness of the evaporation-pyrolysis zone increased with the effective thermal-conductivity value.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.5
• /
• pp.709-717
• /
• 2006

This research was conducted to figure out the feasibility of several sorption materials to treat various pollutants in road runoff. In advance of the major feasibility test with various sorption materials, the separation process with $1.2{\mu}m$ filter was conducted and showed that slight portion of pollutants was removed(Orgamic pollutant - 20%, Nutrient salt - 50%, Heavy metals - 0~30%). To remove dissolved pollutants in runoff, various materials were tested through an isotherm sorption experiment. As a result, GAC showed most effective material among them to lessen most contaminants such as organic compounds and nutrients. On the other hand, ion-exchange resin and Zeolite showed limited usefulness on the some heavy metals. Freundlich model was most suitable for the current experiment data, and the amount of adsorbent (GAC) could calculated based on this model.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.4
• /
• pp.28-32
• /
• 1992

The electrical properties of ONO interpoly dielectrics grown by polycrystalline silicon have been studied. The polysilicon layer deposited as amorphous state kept its surface smoothness even after subsequent heat cycle induced crystallization. Polysilicon was doped with a POCl$_3$ and arsenic ion implantation. Arsenic was implanted in several different doses. The effective barrier heights calculated from F-N plotting method and breakdown fields increased as the polysilicon doping concentration increased. On the other hand they mere degraded when arsenic concentration in polysilicon exceeded 2{\times}10^{20}[cm^{-3}]$. The reliability of dielectric as monitored by TDDB infant fail and breakdown field showed increasing degradation as doping concentration increased

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.3
• /
• pp.114-121
• /
• 2003

Through comparing stress state of TEOS and SiLK-embedded structures, the effect of low-k materials on stress and stress distribution in via-line structures were investigated using three-dimensional finite element analyses. In the case of TEOS-embedded via-line structures, hydrostatic stress was concentrated at the via and the top of the lines, where the void was suspected to nucleate. On the other hand, in the via-line structures integrated with SiLK, large von-Mises stress is maintained at the via, thus deformation of via is expected as the main failure mode. A good correlation between the calculated results and experimentally observed failure modes according to dielectric materials was obtained.

• 한국전산유체공학회:학술대회논문집
• /
• 2011.05a
• /
• pp.535-542
• /
• 2011

To utilizing CFX V12.0.l, internal flow characteristics of denture high-speed air turbine hand-piece unit was identified, in order to analyze the performance of the torque values were compared. In order to find out the difference of torque by mash values, under steady condition, performed grid convergence test. It compared theoretical torque with torque through flow analysis. To describe the motion of turbine blade was used to immerged solid method. Depending on the location of the turbine blade were calculated from five case. Maximum and minimum values of turbine blades was analyzed. To analyze the performance of the torque values were compared with speed of turbine blade.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.165-169
• /
• 2000

A simple method was suggested to calculate the stress intensity factor for a one-sided patched crack with finite thickness. To consider out-of-plane bending effect resulting from the load-path eccentricity, the spring constant as a function of the through-thickness coordinate z was calculated from the stress distribution in the un-cracked plate, ${\sigma}_{yy}(y=0,\;z)$, and the displacement for the representative single strip Joint, $u_y(y=0,\;z)$. The stress Intensity factors were obtained using Rose's asymptotic solution approach and compared with the finite element results. In short crack region, two results had a little difference. However, two results were almost same in long crack region. On the other hand, the stress intensity factor using plane stress assumption was more similar to finite element result than plane strain condition.