• Journal of the Korean Magnetics Society
• /
• v.27 no.4
• /
• pp.140-144
• /
• 2017

We have studied electronic and magnetic structure of cubane-type Co magnetic molecule using density functional method. The calculated density of states show $Co^{+2}$ ionic state and high-spin state because of large exchange interaction between inside Co 3d electrons. The exchange interaction J between Co atoms depends Co-O-Co angle. The calculated J is ferromagnetic with right angles. On the other hand J is antiferromagnetic with large angles since super-exchange interactions between $Co^{+2}$ atoms. It induces that Co cubane has a antiferromagnetic spin structure of AFM1 = [${\uparrow}{\uparrow}{\downarrow}{\downarrow}$]

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.80-90
• /
• 1997

The purpose of this study is to evaluate the validity examination of the J-R curve characteristics for the nuclear reactor pressure vessel steels and Al alloys by the load ratio analysis. The results of the load ratio analysis are compared with those of the J-R curve which are obtained by the ASTM unloading compliance method. The crack length calculated by the load ratio analysis is agree well with the measured final crack length. The slope of the exponential J-R curve estimated by the load ratio analysis is slightly smaller than that by the ASTM unloading compliance method. The J-R curve obtained by the ASTM unloading compliance method is over-predicted and should be offsetted due to the initial negative crack. On the other hand, the load ratio analysis method can evaluate the J-R curve by only load-displacement curve without particular crack measurement equipment.

• PNF and Movement
• /
• v.5 no.1
• /
• pp.49-56
• /
• 2007

Objectives : We find that the reaction force on the elbow joint during elbow flexion, extension with and without an object in the hand can be calculated the equations of motion that the sum of the torque and the sum of the force acting on the elbow joint must be zero and (moment of inertia x angular acceleration) and (mass x acceleration). Methods : we have calculated the equations of motion (${\Sigma}F=0$, ${\Sigma}{\tau}=0$, ${\Sigma}F=ma$, ${\Sigma}{\tau}=Ia$) to investigate the reaction force on the elbow joint during elbow flexion, extension by means of the simplified free-body technique for coplanar forces. Results : we found that the reaction force on the elbow joint during elbow flexion, extention as constant acceleration motion is more than constant velocity, static motion. Also, we found that the relation between during flexion and during extension like this ; $J_{flexion}$ < $J_{extension}$.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.124-128
• /
• 2011

This study estimated experimentally the loss distribution caused by magnetic friction in magnetic parts of a superconductor flywheel energy storage system (SFES) to obtain information for the design of high efficiency SFES. Through the spin down experiment using the manufactured vertical shaft type SFES with a journal type superconductor magnetic bearing (SMB), the coefficients of friction by the SMB, the stator core of permanent magnet synchronous motor/generator (PMSM/G), and the leakage flux of the metal parts were calculated. The coefficients of friction by the stator core of PMSM/G in case of using Si-steel and an amorphous core were calculated. The energy loss by magnetic friction in the stator core of PMSM/G was much larger than that in the other parts. The level of friction loss could be reduced dramatically using an amorphous core. Energy loss by the leakage magnetic field was small. On the other hand, the energy loss could be increased under other conditions according to the type of metal nearby the leakage magnetic fields. In manufactured SFES, the rotational loss by the amorphous core was approximately 2 times the loss of the superconductor and leakage. Moreover, the rotational loss by the Si-steel core is approximately 3~3.5 times the loss of superconductor and leakage.

• Korean Journal of Human Ecology
• /
• v.3 no.1
• /
• pp.25-39
• /
• 2000

This study investigated the nutrient contents, nutrient density. and food group intake patterns of elementary school lunch programs in Kesngju. Four hundred students from four elementary schools participated in this study. Menus served in 60 schools on a weekly basis during each season were analyzed. Parents regarded hygiene as the most important factor in their children's diet. but they showed little concern for the necessity of nutrition education in the school curriculum. Parents considered that the most significant benefit of their children eating school lunches was to reduce unbalanced diets. On the other hand. children considered to be able to be on intimate terms with their friends as the greatest benefit of the school lunch program. The contents and nutrient densities of the meals provided were higher than those calculated from the Korean RDA. However, the content and nutrient density of iron were lower than those calculated from the RDA for 10 to 12 year old girls. The content of sodium was very high. Therefore the nutritionists should consider the Iron and cut down the amount of sodium. The 91.7% of 1,200 meals served contained more than four food groups and the school lunch program provided a sufficient variety of foods. In conclusion. the quality of nutrition in meals served by school lunch programs was considered satisfactory overall.

• Korean Journal of Veterinary Research
• /
• v.11 no.1
• /
• pp.49-53
• /
• 1971

The anthelmentic effects of Fuadin (sodium antimony-III-bis-pyrocatechin-disulphonate), Bithionol 2-2-thiobis 4,6-dichlorophenol)), hexachlorethane and carbon tetrachloride were studied on Eurytrema pancreaticum infected in sheep and goats. The evaluation on the effects was based upon the egg reduction in the feces of the experimental animals administered the drugs. The number of eggs per 5gm. of the feces was respectively calculated before the treatments, and the follw-up for the egg reductions was carried out over a period of three or four weeks(calculated twice a week). Oral administration of Bithionol (once a day for 2 succeed days, at the rate of 75 mg per kg of bady weight) and of hexachlorethane (once a day, at the rate of 300ml per kg of body weight) did not reveal any egg reduction in sheep host. Intramuscular injection of carbon tetrachloride with olive oil (once a day, at the rate of 0.05ml per kg of body weight) did not show the egg reduction in goats. Intramuscular injections of Fuadin for 5 days (the dosage schedule was 0.5ml at 1st day, 1.0ml at 2nd and 3rd day, 1.5ml at 4th and 5th day, to amount of 5.5ml) were completely devoid the fluke eggs in the feces of goats on 4 weeks after each treatment. Throughout the studies, Fuadin was only proved its anthelmintic effect to the goats infected with E. pancreaticum. On the other hand, Bithional, hexachlorethane and carbon tetrachloride did not reveal any effect as Fuadin showed.

• Geomechanics and Engineering
• /
• v.18 no.3
• /
• pp.247-258
• /
• 2019

Soil strength and failure surface geometry directly influence magnitudes of passive earth thrust acting on geotechnical retaining structures. Accordingly, it is expected that as long as the shape of the failure surface geometry and strength parameters of the backfill are known, magnitudes of computed passive earth thrusts should be highly accurate. Building on this premise, this study adopts conventional method of slices for calculating passive earth thrust and combines it with equations for estimating failure surface geometries based on in-situ stress state and density. Accuracy of the proposed method is checked using the results obtained from small-scale physical retaining wall model tests. In these model tests, backfill was prepared using either air pluviation or compaction and different backfill relative densities were used in each test. When the calculated passive earth thrust magnitudes were compared with the measured values, it was noticed that the results were highly compatible for the tests with pluviated backfills. On the other hand, calculated thrust magnitudes significantly underestimated the measured thrust magnitudes for those tests with compacted backfills. Based on this observation, a new approach for the calculation of passive earth pressures is developed. The proposed approach calculates the magnitude and considers the influence of locked-in stresses that are the by-products of the backfill preparation method in the computation of lateral earth forces. Finally, recommendations are given for any geotechnical application involving the compaction of granular bodies that are equally applicable to physical modelling studies and field construction problems.

• Advances in nano research
• /
• v.14 no.2
• /
• pp.155-164
• /
• 2023

Grain size in sheet metals in one of the main parameters in determining formability. Grain size control in industry requires delicate process control and equipment. In the present study, effects of grain size on the formability of steel sheets is investigated. Experimental investigation of effect of grain size is a cumbersome method which due to existence of many other effective parameters are not conclusive in some cases. On the other hand, since the average grain size of a crystalline material is a statistical parameter, using traditional methods are not sufficient for find the optimum grain size to maximize formability. Therefore, design of experiment (DoE) and artificial intelligence (AI) methods are coupled together in this study to find the optimum conditions for formability in terms of grain size and to predict forming limits of sheet metals under bi-stretch loading conditions. In this regard, a set of experiment is conducted to provide initial data for training and testing DoE and AI. Afterwards, the using response surface method (RSM) optimum grain size is calculated. Moreover, trained neural network is used to predict formability in the calculated optimum condition and the results compared to the experimental results. The findings of the present study show that DoE and AI could be a great aid in the design, determination and prediction of optimum grain size for maximizing sheet formability.

• Journal of Korean Society for Atmospheric Environment
• /
• v.22 no.1
• /
• pp.35-41
• /
• 2006

The steel foundries with electric arc furnaces handling metal scraps have recently gained an attention as a potential source of dusts. The present study focuses on the analysis of dust emissions and removals during furnace charging and melting processes by commercial CFD software named FLUENT. A body fitted grid system consisting of 880,000 meshes was first generated by Gambit for the electric arc furnace with the capacity of 60 ton/cycle and then FLUENT was invoked to solve the corresponding NavierStokers equation for the momentum, temperature and dust concentration. The entire processes from metal charging to metal melting were simulated to investigate the unsteady behaviors of fluid flows and dust concentrations. The model simulation results showed that as the top of the electric arc furnace opened for metal charging, hot plumes bursted out from the furnace rose strongly by buoyance and escaped mostly through the main hood. Therefore, the capacity of main hoods determined the vent efficiency in the metal charging process. As the furnace was closed after the metal charging and the metal melting processes was followed, the hot flow stream stretching from the furnace to the main hood was dissipated fast and the flow from the inlet of the bottom of the left hand side to the main and monitoring hoods constituted the main stream. And there was only a slow flow in the right hand side of the furnace. Therefore, the dust concentrations were calculated higher in the left hand side of the furnace, which was consistent with observations.

• Journal of Korea Game Society
• /
• v.13 no.5
• /
• pp.43-54
• /
• 2013

With the consistent development of the 3D application technique, visuals are available at more realistic quality and are utilized in many applications like game. In particular, interacting with 3D objects in virtual environments, 3D graphics have led to a substantial development in the augmented reality. This study proposes a 3D user interface to control objects in 3D space through virtual two-view method using only one camera. To do so, homography matrix including transformation information between arbitrary two positions of camera is calculated and 3D coordinates are reconstructed by employing the 2D hand coordinates derived from the single camera, homography matrix and projection matrix of camera. This method will result in more accurate and quick 3D information. This approach may be advantageous with respect to the reduced amount of calculation needed for using one camera rather than two and may be effective at the same time for real-time processes while it is economically efficient.