• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.165-169
• /
• 2000

A simple method was suggested to calculate the stress intensity factor for a one-sided patched crack with finite thickness. To consider out-of-plane bending effect resulting from the load-path eccentricity, the spring constant as a function of the through-thickness coordinate z was calculated from the stress distribution in the un-cracked plate, ${\sigma}_{yy}(y=0,\;z)$, and the displacement for the representative single strip Joint, $u_y(y=0,\;z)$. The stress Intensity factors were obtained using Rose's asymptotic solution approach and compared with the finite element results. In short crack region, two results had a little difference. However, two results were almost same in long crack region. On the other hand, the stress intensity factor using plane stress assumption was more similar to finite element result than plane strain condition.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.6
• /
• pp.113-118
• /
• 1999

In order to evaluate strength of spot welded joint, at first it is importent that we should know strain distribution near nugget zone. During loading, in HAZ, compressive strain increase with Increase of load, but in nugget zone tensile strain increase. During unloading, on the other hand, even through the decreases, the strain variation is not almost appeared in nugget zone and HAZ. In nugget boundary zone, the strain range increases continuously along with load increase on outer surface, but the strain increases continunously and decreases rapidly beyond yield strength on inner surface. In this paper, strain distribution are measured in inner and outer surface with variation of thickness and load under tensile-shear load. Tensile-shear strength increased as with increase of specimen thickness. As for thickness increase rates are 25%, 50%, 100%, and 150%, tensile-shear strength in crease rates are 40%, 81%, 130% and 228%.

• Journal of Welding and Joining
• /
• v.14 no.4
• /
• pp.62-70
• /
• 1996

Al or Al-alloy have been known to be able to be claded on various materials by using explosive welding process, however, the intermetallic layer frequently formed along the interface have made this process very complicated. In this study, it was focussed to select the process variables, which can get rid of interfacial layer in the Al-claded steel plate. As a result, it was demonstrated that there was a certain range of explosive thickness which did not form the intermetallic phase as well as the non-bonded area. On the other hand, ultasonic tests performed for identifying the presence of interfacial layer nondestructively showed that it could be applied for the intended purpose but its result was weakly related with the microstructural quality of interface.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.12 no.2 s.27
• /
• pp.169-179
• /
• 1988

In the part 1, relations were found between fundmental mechanical properties and primary hand values, performance of Korean women's summer fabrics. In this paper, in order to investigate the hand values and mechanical properties such as tensile, shearing, bending, compression, surface and thickness & weight of the women's fall & winter fabrics were measured by KES-F system. Sorts of 90 commercial fabrics for women's fall & winter clothes were classfied into 39 silk and 51 polyester fabrics according to meterials. The experimental results were analysed statistically to relate the hand values and the mechanical properties and concerning to formation of weared clothes and transformation behavior were investigated. Furthermore, there mechanical properties as well as their hand values were discussed in comparison with those values for kimono fabrics. The main results are summarized as follows; 1. The shape of silk fabrics in formation for weared clothes show a box-shaped silhouette. Polyester fabrics has a easy to shape-less and make a silhouette which goes along with the body. 2. Silk fabrics for Korean women's fall & winter clothes have ${\pm}1\sigma$ range of bending, shearing, surface properties and thickness as compared with kimono fabrics. 3. A wrinkle recovery and drapability of silk fabrics for Korean women's fall & winter clothes are inferior to kimono fabrics. On the other hand, the fabrics for Korean women's fall & winter clothes have conical-shaped silhouette based on higher bending rigidity. 4. Except for flexibility with soft feeling, a primary factor of mechanical properties contributes to the hand values of fabrics for Korean women's fall & winter clothes having no concern with materials were same as the women's summer fabrics. 5. As for the hand values of fabrics for Korean folk clothes, stiffness, anti-drape stiffness are larger than those of kimono fabric and stiffness, anti-drape stiffness, crispness of fabrics for Korean women's fall & winter clothes have smaller values as compared with Korean women's summer fabrics.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.23 no.3
• /
• pp.75-81
• /
• 1997

It has been used that fluorinated compounds could be applied to cosmetic products. It is that fluorinated conpounds are hydrophobicity and lipophobicity. These fluorinated compounds are reported to form a highly protective and effective film against most aggressive chemical and physical agents. PerfluropolymethyoisopropylEther has homophobicity and are colorless, odorless, tasteless and non-greasy. In this we made a success to formulate the new type of hand care cream using PFPE. PFPE are suitable thickness and chemical inertness to skin. The reason that we select PFPE for this investigation. We developed the new type hand care cream by adsorption and dispersion of PFPE. There are very stable dispersion and highly moisture diffusion control. And these characteristics were verified by actual consumer test.

• Proceedings of the ESK Conference
• /
• 1996.10a
• /
• pp.238-243
• /
• 1996

Grip strength is a very important basic data for ergonomic design of hand tools, grips, handles and etc.. Excessive grip strength is contineously exerted to handle the machines or tools, it might cause a musculoskeletal disorder such as cumulative trauma disorders. Capal tunnel syndrome is a typical nerve disorder anomg CTDs. In this paper we have measured the grip strength under sitting and standing posture for Korean adults ; 113 male and 105 female aged from 20' to the above 50' . And this paper performed statistical analysis for driving out characteristics between grip strength and anthropometric data. The results are as follows ; (1) The maximum girp strength is exerted under standing posture with the elbow in full extension(180 .deg. ) for both of male and female (2) There is significant difference in posture, sex and right left hand (3) Grip strength decreases with age for male, but it traces an inverted U curve for female (4) Grip strength has a correlation with age, weight, height, BSA, forearm length, hand length, thickness of wrist, circumference of wrist and breadth of wrist for male

• Archives of Reconstructive Microsurgery
• /
• v.13 no.2
• /
• pp.107-116
• /
• 2004

Flaps are necessary, when important structures such as bone, tendon, nerve and vessel are exposed. Arterialized venous free flap is suited to the coverage of finger and hand because the thickness of venous flap is thin. Authors performed 65 cases arterialized venous free flap for the soft tissue reconstruction of the hand and finger. The size of donor defect were from $1{\times}1cm\;to\;7{\times}12cm$. The mean flap area was $9.1cm^2$. The recipient sites were finger tip in 34 cases, finger shaft in 29 cases and hand in 2 cases. The donor sites were volar aspect of distal forearm in 40 cases, thenar area in 17 cases and foot dorsum in 6 cases. The types of arterialized venous free flap were A-A type in 4 cases and A-V type in 61 cases. The length of afferent vein was from 0.5 cm to 3 cm (mean 1.7 cm) and efferent vein was from 1 cm to 10 cm (mean 2.2 cm). 58 flaps(89.2%) survived eventually. 42 flaps(64.6%) survived totally without any complication. 8 flaps(12.3%) showed the partial necrosis but they were healed without any additional operations. 8 flaps (12.3%) showed the partial necrosis requiring the additional skin graft. We had a satisfactory result by using arterialized venous free flap for the soft tissue reconstruction of finger and hand. We believe that volar aspect of distal forearm, thenar area, foot dorsum are suited as a donor site and the short length of the flap pedicle, the strong arterail inflow affect the survival rate of arterialized venous free flaps.

• Archives of Plastic Surgery
• /
• v.35 no.1
• /
• pp.67-72
• /
• 2008

Purpose: The hand is frequently affected area in high voltage electrical burn injury as an input or output sites. Electrical burn affecting the hand may produce full thickness necrosis of the skin and damage deep structures beneath the eschar, affecting the tendon, nerve, vessel, even bone which result in serious dysfunction of the hand. As promising methods for the reconstruction of the hand defects in electrical burn patients, we have used the peroneal perforator free flaps. Methods: From March 2005 to June 2006, we applied peroneal perforator free flap to five patients with high tension electrical burn in the hand. Vascular pedicle ranged from 4cm to 5cm and flap size was from $4{\times}2.5cm$ to $7{\times}4cm$. Donor site was closed primarily.Results: All flaps survived completely. There was no need to sacrifice any main artery in the lower leg, and there was minimal morbidity at donor site. During the follow-ups, we got satisfactory results both in hand function and in aesthetic aspects.Conclusion: The peroneal perforator flap is a very thin, pliable flap with minimal donor site morbidity and is suitable for the reconstruction of small and medium sized wound defect, especially hand with electrical burn injury.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.3
• /
• pp.247-254
• /
• 2006

Biometrics are getting more and more attention in recent years for security and other concerns. So far, only fingerprint recognition has seen limited success for on-line security check, since other biometrics verification and identification systems require more complicated and expensive acquisition interfaces and recognition processes. Hand-Geometry can be used for biometric verification and identification because of its acquisition convenience and good performance for verification and identification performance. It could also be a good candidate for online checks. Therefore, this paper proposes a Hand-Geometry recognition system based on geometrical features of hand. From anatomical point of view, human hand can be characterized by its length, width, thickness, geometrical composition, shapes of the palm, and shape and geometry of the fingers. This paper proposes thirty relevant features for a Hand-Geometry recognition system. This system presents verification results based on hand measurements of 20 individuals. The verification process has been tested on a size of $320{\times}240$ image, and result of the verification process have hit rate of 95% and FAR of 0.020.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.3
• /
• pp.335-342
• /
• 2017

This study was carried out to explore a new application of the by-products sawdust, formed during sawing and mandarin peels which are agricultural by-products. The boards were manufactured by mixing the sawdust and mandarin peels at different mixing ratio and density. The boards were then converted to ceramics by various percentage of resin impregnation and at different carbonization temperatures. As the percentage of resin impregnation increased, the weight loss was decreased; on the other hand, density, linear shrinkage and thickness shrinkage increased. As the carbonization temperature increased, the weight loss was increased and linear thickness shrinkage increased to $1000^{\circ}C$ and the subsequent increase was insufficient. As the percentage of mandarin peels addition increased, the weight loss, linear shrinkage and thickness shrinkage was decreased.