• The Korean Journal of Physiology
• /
• v.15 no.1
• /
• pp.61-66
• /
• 1981

In 1944 Cavallito and Bailey first extracted an essential oil, a powerful antibacterial principle, from the garlic and named it allicin. Later Stoll and Seeback elucidated that allicin was produced from alliin by the enzymatic action of arinase. Damaru observed the depressor responses following intraperitoneal administration of garlic juice in cats. And Thiersch presented evidence that garlic had a protective action against experimental arterosclerosis in cholesterol-fed animals. On the other hand it was also reported that anemias were caused by long-term ingestion of garlic as a result of reduction in hemoglobin and RBC. From the experiment in which the effect of garlic on the blood sugar level was studied, Lee insisted garlic elevated blood sugar level. However, August and Jain claimed that hypoglycemia was induced by garlic administration. Recently Bordia and Bansal suggested that essential oils extracted from onion and garlic have a strong preventive effect on hyperlipemia and prolonged coagulation time resulted from fat-feeding. Furthermore Bordia et al indicated that garlic exerted a strong fibrinolytic activity. In early 1920 s Sugihara reported that essential oil of garlic not only decreased arterial blood pressure but also had a paralytic effect on the isolated heart and intestinal strip of animals. The present study was proposed to investigate the effect of garlic juice and the mechanism of its action on the motility of the isolated rabbit duodenum. The motility of the isolated duodenum was recorded on polygraph by means of force transducer connected with Magnus apparatus. And the isolated duodenum was separtely pretreated with $acetylcholine(5{\times}10^{-7}\;gm/ml)$, $pilocarpine(2.5{\times}10^{-6}\;gm/ml)$, $histamine(5{\times}10^{-6}\;gm/ml)$ and barium $chloride(2.5{\times}10^{-5}\;gm/ml)$ in order to find out interations of these drugs with ASJ. The results obtained were as follows; At concentrations of 0.25%, 0.5% and 1.0% ASJ markedly inhibited contractions of isolated duodenum while tonus as well as contractility of the isolated intestine were decreased also with 0.5% and 1.0% ASJ. Since ASJ markedly abolished augmented motility of isolated intestine by histamine and partly reduced that by $BaCl_2$, it is strongly suggested that inhibitory action of ASJ on the intestinal motility is caused mainly by its antihistamine effect and partly by its direct action on the intestinal smooth muscle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4463-4468
• /
• 2014

To increase the efficiency of a solar module, the development of solar concentrator using a lens or reflection plate is being proceeded actively and the concentrator pursues the a concentration using a lens or an optical device of a concentration rate and designing as a solar tracking system. On the other hand, as the energy density being dissipated as a heat according to the concentration rate increases, the cares should be taken to cool the solar concentrator to prevent the lowering of efficiency of solar cell by the increasing temperature of the solar cell. This study, researched and developed an economical concentrator module system using a low priced reflection optical device. A concentrator was used as a general module to increase the generation efficiency of the solar module and heat generated was emitted by the concentration through the cooling system. To increase the efficiency of the solar concentrator, the cooling system was designed and manufactured. The features of the micro cooling system (MCS) are a natural circulation method by the capillary force, which does not require external power. By using the potential heat in the case of changing the fluid, it is available to realize high performance cooling. The 117W solar modules installed on the reflective plate and the cooling device in the cooling module and the module unit was not compared. The cooling device was installed in the module resulted in a 28% increase in power output.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.11
• /
• pp.61-68
• /
• 2012

Most widely methods for reinforcement of soil utilized in Korea are anchor method, soil nail method and micro pile method. These methods are classified by the intended use of the structure to be constructed, but the reinforcement of the ground is accomplished contains in common the process of grouting work after inserting the reinforcements. Domestically, gravity grouting has been used mostly so far, but there has always been the risk of insufficient restoration of the loose ground area from the drill holes because the grouting is conducted only by gravity. On the other hand, pressure reinjection grouting may enhance the grouting quality by solving the problem of the existing grouting method considerably since it additionally reinjects grouting through pre-installed tube a certain time after the first grouting. Accordingly, this study evaluated the pullout characteristics by the grouting methods by performing model test on decomposed granite soil, and investigated the support increasing characteristics of reinforcements depending on the curing time, reinjection pressure, and uplift force variation of the pressure reinjection grouting. The result of this research shows that the pressure reinjection grouting demonstrated 1.1~1.3 times of performance of the gravity grouting, and suggests some analysis on optimal water content, reinjection pressure and curing time of the pressure reinjection grouting.

• International Commerce and Information Review
• /
• v.15 no.3
• /
• pp.313-332
• /
• 2013

Large tundra of the Russian Empire, has rich resources and science and technology, and a huge domestic market potential is rapidly changing. Based on the abundant energy resources such as oil, gas, and minerals, as foreign trade is active, the huge capital is moving. And commitment the active SOC by improving laws and regulations and changes in the structure of the Russian economy. One of them pushed the WTO since 1993, 19 years to see fruition join the WTO (World Trade Organization). As the official entry into force August 22, Russia, July 10, 2012, Congress passed the treaty after joining the WTO and of the 156th WTO member countries, was officially join. As the WTO, Russia has the world's 11th-largest economy in the steel tariffs from 30% to 15% are exported to Russia, South Korea Car TV parts from 10% to 0%, reduced from 20% to 5% Korean export companies to export to Russia, etc., is expected to become the new land of opportunity. Russia hopes the changes improve the investment environment, the service industry, manufacturing revitalization the macroeconomic sectors of the economy through the WTO, and forecast, but the consumption increased revenue due to tariff cuts, falling import prices and the real economy, and weak manufacturing base. On the one hand, the perspective of concern. In conclusion, Russia joining the WTO, and the feed to improve the fairness and transparency of the market opening, the Russian advance in Korean companies be facilitated and strong complementary cooperation, especially in manufacturing is expected. In this paper, after Russia joining the WTO, trade liberalization, and ready for a new era of economic cooperation between Korea and Russia, at the point of expanding openness to propose strategies to analyze the problems of Korean companies during the Russian advance.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.19-26
• /
• 2014

This study investigated foot pressure patterns between experienced skiers and intermediate skiers during alpine skiing. Five experienced skiers and five intermediate skiers participated in this study. Foot pressure measurement system was used to measure vertical ground reaction force (vGRF) and contact area under the six plantar regions. Each participant was asked to perform basic parallel turns and carved turns on a $18^{\circ}$ groomed slope. Each right turn was divided into the initiation phase, the steering phase 1 and 2. For the initiation phase of the basic parallel turns, significantly greater contact area was found on the LRF and RRF of the intermediate skiers (p<.05) and significantly greater vGRF was found on the LRF of the intermediate skiers (p<.05). Also significantly greater vGRF and contact area were found on the LRF and RRF of the intermediate skiers at the steering phase 1 (p<.05) and on the LRF of the intermediate skiers at the steering phase 2 (p<.05). For the carved turns, significantly greater vGRF and contact area were found on the LRF and RRF of the intermediate skiers at all three phase (p<.05). On the other hand, significantly greater vGRF was found on the RFF of the experienced skiers at the steering phase 1 (p<.05). Also significantly greater vGRF and contact area were found on the RMF of the experienced skiers at the steering phase 2 (p<.05). In order to increase performance, we suggest that the intermediate skiers should be unweighted at the initiation phase and shift the body weight to the forefoot of the outer foot at the steering phase 1. Also, the outer ski should be loaded more than the both skis at the steering phase 1 and 2.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.7
• /
• pp.379-386
• /
• 2005

Among various kinds of hearing aids which have been developed so far. the conventional air conduction hearing aids have some problems such as the acoustic distortion, an howling effect due to acoustic feedback. Another type of hearing aid. the cochlear implant system can be applied to the profound imparied person. However. it shows the disadvantage that there is no possibility of recovery of the acoustic organ such as ossicle. On the other hand. the implantable middle ear heaving device directly vibratos the ossicular chain and has better sound qualify. good cosmetics for appearance. and wide frequency responses so that it can overcome the defects or the conventional hearing aids. In this paper, a mathematical modeling and a momentum equation derivation of the DET has been performed. For the optimization of the structure dimension generating maximal vibrating force of the DET. the computer simulation using a finite element analysis (FEA) software has been performed. Also. the vibrating transducer has been designed to make the frequency characteristics or the transducer be similar to those of the normal middle ear. Through the experimental results, the measured vibration characteristics of the DET has been evaluated to verify the performance for the application to implantable middle ear hearing devices.

• Journal of Digital Convergence
• /
• v.15 no.11
• /
• pp.61-66
• /
• 2017

The purpose of this study is to suggest ways to improve development plans of academic libraries in Korea, comparing development plans of academic libraries in Korea and strategic plans of academic libraries in advanced countries. For this purpose, development plans and strategic plans of academic libraries in and out of Korea were collected and analyzed. And a rubric evaluation was applied to the case plans. The findings indicate that development plans of academic libraries in Korea are written for present problems and individual work, and lack mission and vision statement. On the other hand, strategic plans of academic libraries in advanced countries present distinct mission and vision statement, and set up goals, objectives, concrete activities in the framework. As a conclusion, this study suggests that academic libraries in Korea need mission statement and vision statement, task force of librarians, links among mission and vision and concrete activities. This study can contribute for librarians of academic libraries to develop strategic plans in Korea. This study can be used as a basic consideration for the establishment and evaluation of strategic plans at academic libraries in Korea. As follow-up studies, further case study about academic library which develops and activates strategic plan in Korea, comparative study on development plans and strategic plans of national libraries and public libraries in Korea and overseas are needed.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.1
• /
• pp.40-47
• /
• 2016

Instead of metal connector generally used on the structural glued laminated timber rahmen joints, the GFRP reinforced laminated plates combining veneer and GFRP (Glass Fiber Reinforced Plastic) and bonded type GFRP rod were used as the connectors. As a result of moment resistance performance evaluation on the joint part applied with these connectors, the yield moment of specimen using the GFRP reinforced laminated plates and GFRP rod pin was measured 4 % lower in comparison to the specimen (Type-1) using the metal connectors, but the initial rotational stiffness was measured 29% higher. Also, the yield moment and rotational stiffness of the specimen using the GFRP-reinforced laminated plates and wood (Eucalyptus marginata) pin showed were measured 11% and 56% higher in comparison to the Type-1 specimen, showing the best performance. It was also confirmed through the failure shape and perfect elasto-plasticity analysis that it showed ductility behavior, not brittle fracture, from the shear resisting force by the pin and the bonding strength increased and the unification of member was carried out. On the other hand, in case of the specimen bonded with GFRP rod, it was impossible to measure the bonding performance or it was measured very low due to poor bonding.

• Journal of Biomedical Engineering Research
• /
• v.16 no.2
• /
• pp.191-200
• /
• 1995

Although air, water, and noise pollutions have been widely recognized, electromagnetic forces (EMF) hazard has been rarely recognized as a pollution and very little studies has been done in this country. Thus, in this study electromagnetic forces radiated by various home appliances, office machines, and communication equipments were measured and so were several places radiating strong EMF such as subway stations and electric substations. Among the home appliances microwave oven radiates lots of magnetic field and microwaves, and electric mattress does strong magnetic field. In video game room strong magnetic and considerable electric fields were measured. It was observed strong magnetic field inside of electric powered train and very strong magnetic and electric fields on some platforms. Hand-phone and car-phone radiate very hazardous level of microwaves to brain and that they rapidly come into wide use. In this study data base for various electric machines and places radiating strong EMFs were constructed and could be used for future epidemiological studies.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1915-1933
• /
• 2013

In this study, the virtual fixed point analysis and 3D fully modeling analysis for bent pile structures are conducted by considering various influencing factors and the applicability of the virtual fixed point theory is discussed. Also, the optimized column-pile length ratio is analyzed for supplementing virtual fixed point design and examining a more exact behavior of bent pile structures by taking into account the major influencing parameters such as pile length, column and pile diameter, reinforcement ratio and soil conditions. To obtain the detailed information, the settlement and lateral deflection of the virtual fixed point theory are smaller than those of 3D fully modeling analysis. On the other hand, the virtual fixed point analysis overestimates the axial force and bending moment compared with 3D fully modeling analysis. It is shown that the virtual fixed point analysis cannot adequately predict the real behavior of bent pile structures. Therefore, it is necessary that 3D fully modeling analysis is considered for the exact design of bent pile structures. In this study, the emphasis is on quantifying an improved design method (optimized column-pile length ratio) of bent pile structures developed by considering the relation between the column-pile length ratio and allowable lateral deflection criteria. It can be effectively used to perform a more economical and improved design of bent pile structures.