• 전기학회논문지
• /
• 제56권12호
• /
• pp.2157-2165
• /
• 2007

A novel design technology for a high frequency electronic ballast for metal-halide discharge lamps is proposed. A PFC technique is adopted to get unit power factor and output frequency alteration technique is adopted to avoid acoustic resonance. For characteristics evaluation, the designed electronic ballast is presented using normalized parameter. To reduce losses of the ballast. ZVS control technique is adopted and the maximum flux density of magnetic core for inductor should be kept lower. The electronic ballast for 250[W] metal-halide discharge lamp is implemented and 96[%] efficiency and low conducted EMI level are accomplished.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.241-244
• /
• 2002

This paper presents the electronic ballast for the metal halide lamp with free voltage input and implemented for CDM-T[150W] lamp. HID lamps have a good color rendition, long life and good focusing capability but they have fickers by acoustic resonance when driven at high frequency. To reduce the acoustic resonance phenomena, the electronic ballast was designed for high frequency operation with the constant frequency sinusoidal wave of 75[kHz]. Finally, the experimental results on the ballast of CDM-T [150W]metal halide lamp with the propose methods are discussed.

• 산업기술연구
• /
• 제30권A호
• /
• pp.75-81
• /
• 2010

We described the operating principles of two different type of igniters for lightning of Ceramic Metal Halide Lamp(CMHL) and also provide some useful comparisons. One is for magnetic ballast, the other one is for electronic ballast which operates lamp by low-frequency square-waveform. Ignition voltage of lamp depends on the structure of igniter, such as the length and electrical characteristics of cable, which make troubles for ignition in real sites. Therefore, we measured and analyzed ignition voltages from igniters which are used in magnetic and electronic ballast in cables at a distance of 5 meters between a lamp and a igniter to suggests an applicable solution in real sites.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1947-1953
• /
• 2009

Metal halide (MH) lamps have been largely used due to high luminous efficiency, good color rendering, and long life. Since the metal halide lamps have problems of high ignition voltage and acoustic resonance. Thus, the design of ballast is very difficult for engineers. This paper proposes prototype of electric ballast in order to solve above two problems. The proposed electric ballast is consisted of EMI filter, full wave rectifier circuit, active PFC, DBI(Dual Buck Inverter), dimming circuit and ignitor circuit. The DBI supplies both rectangular voltage and current to the lamp. As the result of the experiment, the acoustic resonance was eliminated and the ignitor circuit was designed to generate high ignition voltage than 5kV. It makes the dimming circuit possible to control the lamp power in range between 230W and 350W.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.160-162
• /
• 2004

The aim of this study is to make the technical standards for certificating a high efficiency metal-halide lamps and reflectors using the high intensity discharge lamps, to accomplish the practical energy saving effect. Metal-halide lamps are certificated by stabilzed and restarting time, lamp voltage, current, power and light output efficiency. The high illumination reflectors using HID lamps are certificated by testing reflective index, fading, the melting point, glare and install spacing factor.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.589-593
• /
• 2001

This paper presents a high frequency modulation electronic ballast for the metal halide lamp. As the proposed ballast operates in high frequency ranges (20kHz - 100kHz) and it can start up the lamp using the LC resonant circuit without external igniter, the proposed ballast is very compact. The proposed ballast is controlled with the modulated frequency in the range of 20kHz to 100kHz, and it has variable modulating frequencies between 200Hz and 2kHz in order to avoid the acoustic resonance phenomenon. In this paper, a new realtime acoustic resonance detection method is described and the experimental results with the proto-type ballast of 150W metal halide lamp with the dimming function are discussed.

• Nuclear Engineering and Technology
• /
• 제7권1호
• /
• pp.25-29
• /
• 1975

1-Phenethyl Chloride와 2-Phenethyl Chloride의 할로겐 교환반응 속도를 아세톤 용매속에서 방사성 할라이드 이온을 사용하여 측정하였으며, 활성화 엔탈피와 활성화 엔트로피를 결정하였다. 이 반응은 S$_{N}$2 반응이며 할라이드 이온의 상대적 친핵성의 순서는 Cl->Br->I-이고 반응 속도는 Benzyl Chloride와 비교해 볼때 대체적으로 느리다. 이 결과를 할라이드 이온의 용매화 효과와 HSAB원리로 설명하였다.

• Journal of Electrochemical Science and Technology
• /
• 제13권1호
• /
• pp.71-77
• /
• 2022

Metal halide perovskites are promising photovoltaic materials, but they still have some issues that need to be solved. Hysteresis is a phenomenon that strongly is correlated with ion migration; thus, a fast, easy, and low-temperature method for measuring ion migration is required. Through selective blocking, ion migration can be measured separately, apart from electron migration. In this study, ion migration in metal halide perovskites was measured using a vertical device. At different temperatures, ionic activation energies were obtained for a range of perovskite compositions such as MAPbI₃, FAPbI₃, CsPbI₃, and MAPbBr₃. By comparing the measured ionic activation energies with the theoretical values, we conclude that among other possibilities, I^- is the migrating ion in MAPbI₃, FAPbI₃, CsPbI₃, and Br- is the migrating in MAPbBr₃.

• 한국전기전자재료학회논문지
• /
• 제37권5호
• /
• pp.519-526
• /
• 2024

This review examines the use of halide perovskite materials in electronic devices, highlighting their exceptional optoelectronic properties and the challenges associated with them. Despite their potential for high-performance devices, practical applications are limited by sensitivity to environmental factors such as moisture and oxygen, etc. We discuss advances in enhancing stability and operational reliability, featuring innovative synthesis methods and device engineering strategies that help mitigate degradation. Furthermore, we explore the integration of perovskites in applications such as field-effect transistors and LEDs, emphasizing their transformative potential. This review also outlines future research directions, stressing the need for ongoing improvements in material stability and device integration to fully realize the commercial potential of perovskites.

• 해양환경안전학회지
• /
• 제19권6호
• /
• pp.681-687
• /
• 2013

본 연구에서는 240 W급 고출력 LED 집어등의 특성을 기존 메탈 집어등과 비교하여 배광 패턴의 특성 및 광효율을 분석하고, 파장 대역의 특성을 해양 투과 특성 및 시감도를 고려하여 집어등 광원으로써 적정성을 분석하였다. 색온도 6500 K, white LED 패키지를 적용한 240 W LED 집어등의 특성을 보면 배광각은 ${\pm}45^{\circ}$, 조도 변화률이 0.8로 개선되었으며, 광효율은 98.8 lm/W로 향상되었다. LED 집어등의 해수의 투과율과 인간의 암순응시 시감도를 1,500 W 메탈등 1개와 4개의 240 W LED 집어등에 적용하여 비교한 결과, 방사출력이 수심 50 m에 이르면 거의 동등하였으며, 암순응시 시감도만을 적용한 경우에도 LED 집어등이 약 5 % 정도 높은 광속을 나타내었으며, 수심 50 m의 방사출력에 암순응시 시감도를 적용한 경우 LED 집어등의 광속이 14 % 높게 나타나 메탈등의 대체 가능성을 확인할 수 있었다.