• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1861-1868
• /
• 2001

Vortical structures in the near-wake region of a cubic obstacle are studied using numerical simulation. We consider flow between two parallel plates with a cube mounted on one of the plates. In the turbulent near-wake region of the flow, coherent structures such as hairpin vortices are found. Quasi-periodic behavior of the hairpin vortices is noticed; its dimensionless frequency at Re=1,000 is about 0.82 which is consistent with the result of Elavarasan of et al.'s experiment [Fluid Dyn. Research, 2000, 27] although their geometry is somewhat different from on. In the case of Re=3,500, the dimensionless frequency of the hairpin vortex is about 1.60. It is observed that the translating speed of the head of the hairpin vortex is lower than the streamwise mean velocity at that location. In the vicinity of the lower plate downstream of the cube, various length scales are identified thus less coherent. However, it is noticed that the vortical structures become gradually elongated downstream of the new reattachment.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.82-85
• /
• 2002

본 논문에서는 접지면에 어퍼쳐를 갖는 협대역 hairpin-comb 대역 통과 여파기를 제안하였다. Hairpin-comb 공진기는 두 공진기 사이의 간격이 매우 좁더라도 약한 커플링을 유지하는 특성이 있으므로 협대역 대역통과 여파기 제작시 여파기의 전체적인 크기를 작게 할 수 있는 장점이 있다. 그러나 일반적인 마이크로스트림에서는 공진기 사이가 최소한의 거리가 되더라도 커플링이 너무 미약하여 사용할 수 없다, 그러므로 접지면의 어퍼쳐를 사용하여 약한 커플링을 보상함으로써 일반 마이크로 스트립에서도 협대역을 대역통과 여파기를 제작할 수 있었다. 또한 공진기 사이의 거리변환 없이 어퍼쳐의 크기에 의해서 커플링을 조절함으로써 전체 여파기의 크기를 고정시킨 상태에서 대역폭을 조절할 수 있는 장점이 있다. 본 논문에서는 중심 주파수가 1.78 ㎓ 이고 대역폭이 62MHz(3.5%)인 여파기를 제작하였다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.11a
• /
• pp.260-264
• /
• 2003

In this paper, a $\lambda/4$ hairpin resonator is proposed to reduce the size of planar resonators for a LTCC MLC bandpass filter. The $\lambda/4$ hairpin resonator operates as stepped impedance resonator (SIR) without changing the width of the planar resonator. It is composed of two sections those are parallel coupled line and transmission line. The characteristic impedance of two sections is different each other. The design formulas of the bandpass filter using the coupling element at the arbitrary position are derived from even and odd-mode analysis. The formulas can take account of the arbitrary coupling of lumped ana/or distributed resonators. The advantage of this filter is its abilities to change freely the coupling structure between two resonators. Experimental bandpass filters for 2.4GHz Band are implemented and their performances are shown.

• BMB Reports
• /
• v.41 no.11
• /
• pp.778-783
• /
• 2008

Turnip yellow mosaic virus (TYMV) RNA has two hairpins in its 5' untranslated region (5'-UTR). To investigate the role of the hairpins in replication of TYMV, mutants lacking one or both of the two hairpins were constructed. The TYMV constructs were introduced into Chinese cabbage by an Agrobacterium-mediated T-DNA transfer method, called agroinfiltration. Analysis of total RNA from agroinfiltrated leaves showed that replication of the mutant TYMV RNA lacking both hairpins was about 1/100 of wild type. This mutant was also impaired in systemic spread. Deletion analysis of each hairpin revealed that both hairpins were needed for maximal replication. The deletion analysis along with sequence modification of the hairpin structure indicates that the second hairpin plays a role in efficient long-distance systemic movement of TYMV.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.798-801
• /
• 2000

For the performance enhancement of communication system, high quality filters are required. Also a minimization of size of filter is required for the interation of devices in the limited area. Conventional metal filters made of copper can be substituted by high quality high temperature superconducting(HTS) films for better performance. Hairpin type filters have been designed with the center frequency 14 GHz for the size reduction. 3-pole and 4-pole filters centered at 14 GHz with the bandwidth of about 300 MHz were designed and fabricated. With the simulation results, the frequency responses showed low insertion loss and sharp skirts characteristics. The frequency response of HTS 14 GHz fi1ter was measured at 77 K and compared with the simulation results. We have compared YBCO filters and copper filters which were made with the same design rules. Simulated and measured frequency responses reveal that HTS YBCO hairpin type bandpass filters show better performance than copper filters.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.171-175
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• v.29 no.10
• /
• pp.2026-2028
• /
• 2008

• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.51-51
• /
• 2002

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.27-30
• /
• 2018

In this study, a 40 GHz band pass filter(BPF) employing a hair-pin structure has been designed, fabricated, and characterized for millimeter-wave wireless communication applications. Using the 3 dimensional(3-D) electromagnetic(EM) tool and design equations of the hairpin BPF, the BPF was desgned on the 5 mil-thick Duroid substrate(RT5880) with a relative dielectric constant (${\varepsilon}_r$) of 2.2. The tapping point (t) of the U-shape resonator in the input and output port has been determined using extracted an external Q-factor ($Q_e$). The coupling coefficients between the other resonators are calculated by adjusting the physical dimensions for the desired response of the BPF. The fabricated BPF was characterized using probing method on a probe station. Its measured center frequency(fc) and fractional BW are 41.6 GHz and 7.43 %, respectively. The measured return loss is below -10 dB at the pass band and the insertion loss is 3.87 dB. The fabricated BPF is as small as $9.1{\times}2.8mm^2$.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.3
• /
• pp.333-345
• /
• 2015

This study evaluated the static and dynamic shear strength of cast-in-place anchors reinforced with hairpin bars in uncracked and cracked concrete. The anchors 30mm in diameter reinforced with D10 hairpin bar were designed with an edge distance of 150mm and an embedment depth of 240mm. The cracked specimens consisted of the orthogonal and parallel cracks to the direction of shear loads, respectively. The dynamic strength was evaluated using seismic qualification tests based on the ACI 355.2 standard. The shear strength of the hairpin reinforced anchor was hardly correlated to the concrete cracks and the dynamic strength was similar to its static shear strength. Finally, a consideration on the design strength of hairpin reinforced anchors was presented.