• 자원리싸이클링
• /
• 제24권3호
• /
• pp.3-10
• /
• 2015

코발트와 구리가 함유된 유기산 침출용액으로부터 용매추출법을 이용하여 구리와 코발트의 분리 회수를 위한 기초 연구를 실시하였다. 구리와 코발트의 추출에 영향을 미칠 수 있는 평형 pH, 추출제의 농도, 상비 변화에 대하여 용매 추출 실험을 진행하였다. 구리 추출제로 LIX 84, 코발트 추출제로 Cyanex 272 및 Versatic acid 10을 사용하였는데 실험 결과 구리의 경우 평형 pH 2.0 이상에서 약 99%의 추출율을 보였고, 코발트의 경우는 추출제로 Cyanex 272를 사용 시 평형 pH 6.0에서 Versatic acid 10 사용 시에는 평형 pH 7.5에서 각각 90% 이상의 추출율을 나타내었다. 한편, 구리와 코발트를 탈거하기 위한 탈거제로 최적의 황산농도는 120 ~ 150 g/L 이었다. 그리고 구리 및 코발트가 함유된 미생물 침출용액에서 구리와 코발트를 회수할 수 있는 기초 최적 공정을 제시하였다.

• 방사성폐기물학회지
• /
• 제3권4호
• /
• pp.309-317
• /
• 2005

방사성 폐기물 핵종 재고량 평가에 필요한 핵종분석을 위하여 다양한 매질의 방사성 폐기물 시료로부터 $^{99}Tc,\;^{94}Ng,\;^{55}Fe,\;^{90}Sr$ 및 $^{59/63}Ni$의 분리에 관한 연구가 수행되고 있다. Ni은 음이온교환 수지와 Sr-Spec 추출 크로마토그래피 수지로 Re($^{99}Tc$의 대용물), Nb, Fe 및 Sr을 차례로 분리하는 과정에서 Ca, Mg, Al, Cr, Ti, Mn, Ce, Na, K 및 Cu와 함께 회수되었다. 본 연구에서는 Ni의 선택적 분리기술을 확립하기 위하여 Ni-Spec 추출 크로마토그래피 및 양이온교환수지법으로 이들의 분리거동을 비교하였다. 또한 Ni의 정제와 기체비례계수법으로 방사능을 측정하기에 적합한 계측시료 준비를 위하여 ammonium $citrate/ethanol-H_2O$ 및 tartaric $acid/acetone-H_2O$에서 dimethylglyoxime(DMG)에 의한 Ni의 침전거동을 조사하였다 원자력발전소로부터 채취한 폐이온교환수지 시료 용해용액의 화학조성을 모사하여 만든 모의 폐이온교환수지 용액을 사용하여 Re, Nb, Fe 및 Sr 분리과정을 거쳐 최종적으로 분리한 Ni의 회수율은 $92.1\%\;(RSD:\;0.9\%)$이었다. 또한 tartaric $acid/acetone-H_2O$에서 DMG에 의한 Ni의 회수율은 $85.6\%\;(RSD:\;1.9\%)$이었다.

• Journal of Biosystems Engineering
• /
• 제32권2호
• /
• pp.84-90
• /
• 2007

This study was conducted to design and manufacture a final prototype of garlic separator and to evaluate its performance. The performance of garlic separation was compared with manual separation. The final prototype for garlic separation consists of bucked-elevator device for automatic feed of garlic, rotating cone typed device, blower, and power transmission device. The optimal condition of outlet clearance was 19 mm and in this clearance, the proportions of fragment garlic separated in the large quality of Namdo garlic and all quality of Uiseong garlic were above 95% and above 85%, respectively. All proportion of damaged garlic was below 5% for all variety and quality. The garlic separation capacities of this developed machine were 310 kg/h for Namdo garlic and 293.6 kg/h for Uiseong garlic in the large quality. Capacities of final prototype compared with human being were $12.9{\sim}19.6$ times for Namdo and $24.2{\sim}31.7$ times Uiseong garlic, respectively.

• 대한화학회지
• /
• 제38권9호
• /
• pp.660-666
• /
• 1994

이웃하는 란탄족 원소의 분리에서 온도와 흐름속도의 영향을 치환크로마토그래피로 연구하였다. 일렬로 연결된 두 컬럼에 Amberlite 120 양이온 교환수지를 채워서 충전용과 분리용으로 나누어 사용하였다. 보유이온은 $H^+$을, 흐름용액은 0.012M과 0.015M의 EDTA 용액을 사용하였다. 실험중에는 관의 온도를 90$^{\circ}C$로 유지하였으며 이온교환수지 관 속에 생기는 기포를 줄이기 위해 일정한 압력을 걸었다. 용출액은 ICP-AES로 직접 분석하였다. 이 실험에서 란탄족 원소쌍 La: Ce, Ce :Pr, Pr: Nd에 대한 분리인자는 각각 4.6, 2.8, 1.9이었으며 이것은 25$^{\circ}C$에서 이론적으로 얻은 것보다 큰 값이다. 흐름속도를 2.5 ml/min에서 1.5 ml/min로 줄이면 이론단해당높이(HETP)도 1.60 cm에서 0.88 cm로 줄었다. 따라서 용리액의 흐름속도를 줄이고 온도를 높이므로써 분리효율을 증가시킬 수 있었다. 이 실험에서 99.9% 이상의 순수 란탄족 원소에 대한 회수율은 49∼77%이었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.447-450
• /
• 2006

Hydrogen separation from multi-component mixture gases by the four-bed PSA process was studied experimentally and theoretically using layered bed of activated carbon and zeolited 5A. Effects of the adsorption time, the linear velocity on the process performance were investigated. The adsorption time and linear velocity affected the purity and recovery of the product $H_2$ purity is increases according as the adsorption time and linear velocity decrease; however, $H_2$ recovery shows an opposite phenomena to the purity. PSA process simulation studied to find optimum operation condition. In the results, 50sec adsorption time, 3cm/s linear velocity might be optimal values to obtain more than 99.999% purity and 65% recovery hydrogen.

• 통합자연과학논문집
• /
• 제10권1호
• /
• pp.43-50
• /
• 2017

Synthetic resins were combined 1-aza-12-crown-4 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 8%, and 16% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on metal ion adsorption for resin adsorbent, the metal ions showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in ethanol solvent was the order of uranium ($UO_2{^{2+}}$) > cobalt ($Co^{2+}$) > dysprosium ($Dy^{3+}$) ion, adsorbability of the metal ion was the crosslink in order of 1%, 2%, 8%, and 16% and it was increased with the lower dielectric constant. In addition, theses metal ions could be separated in the column with 1% crosslink resin by using nitric acid (pH 2.0) as an eluent.

• Membrane and Water Treatment
• /
• 제7권6호
• /
• pp.521-537
• /
• 2016

Laboratory-scale experiments were carried out to investigate the adsorption equilibrium, the adsorption kinetics and facilitated transport of two cationic dyes (Methylene Blue (MB) and Rhodamine B (RB)) on Polymer Inclusion Membrane (D2EHPA-PIM). Different adsorption isotherms (Freundlich, Langmuir and Temkin models) as well as kinetics models indicated that the adsorption process is spontaneous and exothermic. Under the optimal conditions, the adsorption removal efficiencies reach about 93% and 97% for MB and RB respectively. Different extraction values by D2EHPA-PIM were obtained for the two cationic dyes: MB is weakly extracted at pH 2.0 (E% = 18.7%) whilst E% = 82.4% was observed for RB at the same pH. This difference was exploited in a mixture containg both the 2 cationic dyes for the selective extraction of RB at pH 2. Desorption of both dyes was achieved from the membrane by using acidic aqueous solutions and desorption ratio up to 90% was obtained. The formulas of the extracted complexes by the PIMs were, determined by the method of slopes. The dyes transport was elucidated using mass transfer analysis where in it found relatively high values of the initial flux ($J_0$) as 41.57 and $18.74{\mu}mol.m^2.s^{-1}$ for MB and RB respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권11호
• /
• pp.1622-1629
• /
• 2013

The objective of this study was to develop a new method to separate phosvitin from egg yolk without using organic solvents. Phosvitin was extracted from yolk granules using 10% NaCl or 10% $(NH_4)_2SO_4$ (final concentration) and then treated with heat to precipitate the lipoproteins from the extracted solution. The optimal pH for the phosvitin extraction from yolk granules was determined, and the iron-binding ability of the extracted phosvitin (final product) was tested. Adding 10% $(NH_4)_2SO_4$ disrupted the granules, and the subsequent thermal treatment at $90^{\circ}C$ for 1 h precipitated low density and high density lipoproteins, which enabled separation of phosvitin by centrifugation. The phosvitin concentration in the extract was significantly higher when the pH of the solution was adjusted to pH ${\geq}9$. The purity and recovery rate of phosvitin at the end of the separation process were approximately 78% and 56%, respectively. The separated phosvitin was confirmed to have ferrous and ferric iron binding ability. The advantages of this new method compared with the traditional methods include no organic solvents and high-priced equipment are needed for the separation. Also, this method is more environment and consumer friendly than that of the traditional methods.

• 한국안전학회지
• /
• 제29권4호
• /
• pp.91-96
• /
• 2014

This research deals with the combustion experiment of pine trees, which are the most representative species in Korea. Experimental data are compared with theoretical ones using Fire Simulation Program(FDS). It is considered that horizontal/vertical temperature distribution and radiant heat influence on adjacent areas in fire scenes. The linear function for separation distance to temperature was drawn by applying Stefan-Boltzmann's law; $y=112.13133{\times}({\sigma}T^4)^{-0.52916}$ for calculating the separation distance. In combustion experiment, the radiant heat came to $1.4{\sim}1.5kW/m^2$ in case of the separation distance by one meter. The numerical values mean that human body show the critical level of pain after one minute without a protective equipment.

• 멤브레인
• /
• 제27권2호
• /
• pp.199-204
• /
• 2017

본 연구에서는 펄프공정으로부터 배출되는 리그닌 추출물 내의 금속이온분리를 위한 연구를 진행하였다. ${\alpha}$-Alumina 분말에 DMAc (N,N-dimethylacetamide) 용매와 PESf (Polyethersulfone) 고분자를 혼합하고 PVP (Polyvinylpyrrolidone) 분산제를 첨가하여 슬립 캐스팅 방법으로 분리막을 제조하였다. 분리막은 CFP (Capillary Flow Porometer) 장치를 통해 기공크기를 측정하고 FE-SEM (Field Emission Scanning Electron Microscope) 장치를 이용하여 실제 분리막 표면과 단면을 관찰하였다. 플럭스는 분리 실험장치를 이용하여 시간당 여과된 무게를 측정하여 계산하였다. 기공크기측정은 0 psi에서 30 psi까지 서서히 증가하는 승압조건에서 진행하였다. 분리막의 기공크기는 $0.4{\mu}m$ 크기를 가지며 플럭스는 분리막의 파울링에 의해 초기 플럭스 값인 $6.36kg{\cdot}m^{-2}{\cdot}h^{-1}$에서 $1.98kg{\cdot}m^{-2}{\cdot}h^{-1}$으로 감소하여 3시간 이후부터 일정해지는 것을 확인하였다. 투과 실험 후 막 오염물질은 간단한 세척을 통해 제거 가능하였다. 분리실험을 통해 초기 리그닌 추출물 내에 포함되어 있던 Na은 69%만큼 줄었고, Fe은 87%, K은 95%, Ca은 93%, Mg은 96%만큼 제거됨을 보였다.