Journal of Biosystems Engineering

Korean Society for Agricultural Machinery (한국농업기계학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Rotating Cone Type Garlic Clove Separator (III) - Design and Performance Evaluation of Final Protype -

회전 원추형 마늘 쪽분리기 개발에 관한 연구 (III) - 최종기 설계 및 성능평가 -

  • Lee, J.S. (Dept. of Mechanical Engineering, Kundong University) ;
  • Kim, K.B. (Korea Research Institute of Standards and Science)
  • Published : 2007.04.25
Download PDF
⟨ Previous Next ⟩

Abstract

This study was conducted to design and manufacture a final prototype of garlic separator and to evaluate its performance. The performance of garlic separation was compared with manual separation. The final prototype for garlic separation consists of bucked-elevator device for automatic feed of garlic, rotating cone typed device, blower, and power transmission device. The optimal condition of outlet clearance was 19 mm and in this clearance, the proportions of fragment garlic separated in the large quality of Namdo garlic and all quality of Uiseong garlic were above 95% and above 85%, respectively. All proportion of damaged garlic was below 5% for all variety and quality. The garlic separation capacities of this developed machine were 310 kg/h for Namdo garlic and 293.6 kg/h for Uiseong garlic in the large quality. Capacities of final prototype compared with human being were $12.9{\sim}19.6$ times for Namdo and $24.2{\sim}31.7$ times Uiseong garlic, respectively.

Keywords

References

  1. Cho Y. J. and C. J. Kim. 1993. Analysis of performance of an air-type garlic peeler for its optimum design. J. of Korean Society for Agricultural Machinery 18(4):351-357. (In Korean)
  2. Jun, H. J., J. T. Hong, W. J. Park, Y. Choi and Y. K. Kim. 1997. A fundamental study for development of garlic and onion harvester. Proceedings of the KSAM 1997 Summer Conference 2(2):71-76. (In Korean)
  3. Lee J. H. and H. K. Koh. 1996. Drying characteristics of garlic. J. of Korean Society for Agricultural Machinery 21(1):72-83. (In Korean)
  4. Lee, J. S., K. B. Kim and J. S. Lee. 2001. Develope of rotating cone type garlic separator (I) - Prototype and its performance test. J. of Korean Society for Agricultural Machinery 26(2): 131-140. (In Korean)
  5. Lee, J. S., K. B. Kim and J. S. Lee. 2007. Develope of rotating cone type garlic separator (II) - Effect by clearance between inner and outer cone. J. of Korean Society for Agricultural Machinery 32(2):in press. (In Korean)
  6. Noh, K. M., J. G. Park, C. J. Chung and Y. C. Chang. 1997. A fundamental for developing a garlic harvester(1) - Physical properties of a live garlic at the harvesting season-. Proceedings of the KSAM 1997 Winter Conference 2(1):33-39. (In Korean)
  7. Park. J. B. 1998. Development of continuous garlic peeling machine for improving the peeling efficiency (II). Korea Food Research Institute
  8. 백성기, 2003, 습식 마늘박피 시스템 개발. 농림부
  9. 이종수, 2002. 마늘쪽분리기. 특허청. 등록특허 제10-0326731호