• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.97-101
• /
• 2005

The ZnO:Al thin films were prepared on glass by Facing Target Sputtering (FTS) system. We investigated electrical, optical, and structural properties of AZO thin film with sputter ins current 0.1[A]-0.6[A]. We obtained the lowest resistivity $2.3{\times}\;10^{-4}[{\Omega}-cm]$ at sputtering current 0.6[A] from the 4-point probe and the strong (002) peak at sputtering current 0.3[A] from the X-ray Diffractometer (XRD). The optical transmittance of AZO thin films show a very high transmittance of $80\~95\%$ in the visible range and exhibit the absorpt ion edge of about 350 nm.

• 한국의사학회지
• /
• 제23권2호
• /
• pp.37-41
• /
• 2010

There are two transcriptions of "ChiJongBang" in Korea at the moment. The first is the Jangseo-gak ibrary transcription(K3-380). The title is "ChiJongBang(治腫方)" and it starts with the contents of "ChiJongBang(治腫方)", followed by "HoeChunYoGyeol(回春要訣)", "NoInSeopYangBang(老人攝養方)", "SoABang(小兒方)". "ChiJongBang(治腫方)" does not even take up a large portion of the book. The other transcription is "ChiJongBang(治腫方)" in Geojil's "Uihui(宜彙)", which was presented into the worldin 1871(the 8th year of King Go-jong)by GeumRiSanIn(錦里山人). The contents of the two transcriptions are the same, and both are left by ImEonGuk. The latter part is identical to the contents of "ChimGuGyeongHeomBang". It was common fora medical book to have additional useful information attatched in the end, so it was thought that somebody added a part of "ChimGuGyeongHeomBang" at the end of "ChiJongBiBang". But the discovery of a woodcut "ChiJongBang" in Korean annotation confirmed that the making of this book was led by the government, and the fact that abscess was a big part of healthcare around the ImJinWaeRan(Japanese Invasion of Korea in 1592) period.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.165.2-165.2
• /
• 2016

현재, 솔더범프용 주석계 도금액의 필수성분인 산화방지제의 경우, 국내외 경쟁사에서는 가격 및 성능이 우수한 벤젠/페놀 계열을 적용 중이다. 그러나, 최근 대형 고객사에서 페놀류 산화방지지제를 환경규제물질로 규정함에 따라, 자사에서는, 특허 이슈 해소 가능한 친환경 대체 산화방지제 개발을 해오고 있다. 본 연구에서는, 반도체 패키지용 주석계 도금액의 산화방지제 종류와 농도에 따른 주요 특성 (Particle, 전류 효율, 안정성 (변색, 침전 외), 범프 두께의 편차, 감광제의 침해, Reflow 후 빈공간 등)에 대하여 살펴보았다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.56-59
• /
• 2006

The ITO thin films were prepared by FTS (Facing Targets Sputtering) system on polycarbonate (PC) substrate. The ITO thin films were deposited with a film thickness of 100nm at room temperature. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical and optical characteristics of the ITO thin films were evaluated by Hall Effect Measurement (EGK) and UV-VIS spectrometer (HP), respectively. From the results, the ITO thin film was deposited with a resistivity $8{\times}10^{-4}[{\Omega}-cm]$ and transmittance over 80%.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.60-63
• /
• 2006

Preparing AZO thin films on the polymer substrate has been widely studied Because AZO thin film has the potential applications. In this study, we prepared AZO thin films on polyethersulfon (PES) at room temperature. The AZO thin films were prepared at $O_2$ gas flow rate of 0.05 and sputtering power of 100W with different film thickness by facing targets sputtering method. The electrical, optical and crystallographic properties of AZO thin films were measured by Hall Effect measurement system, UV/VIS spectrometer, SEM and XRD. From the results, we obtained AZO thin films with a low resistivity, a transmittance of over 80% and c-axis preferred orientation.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.207-210
• /
• 2007

We prepared Al doped ZnO/Ag/Al doped ZnO on the polymer substrate by Facing Target Sputtering (FTS). FTS featured Facing Target Sputtering featured that deposition is stable at the low pressure, it has high plasma density and suppresses the substrate damage from energetic particles. We fixed to 50nm up and down thickness of AZO layer, respectively and that of intermediate Ag layer was adjusted with deposition time. In the result, AZO/Ag/AZO multilayer thin films have much better electrical conductivity than AZO single layer thin film. As increasing the thickness of Ag layer, the transmittance decreased.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.64-67
• /
• 2006

The main purpose of this research was to investigate the effects of urbanization on the groundwater system in the Gap river basin, a sub-basin of the Geum river basin. In this analysis, we constructed a water cycle analysis system using SWAT. Then, changes in soil moisture and recharge rate due to land-use changes were investigated using different land-use data estimated in 1975 and 2000. Simulation results were analyzed for both draught (2001) and flood (2003) years to take into account different hydrologic conditions. It was shown that recharge rate in the most urbanized area (31% change) was reduced by 17% for both periods due to urbanization. The results also indicated that soil moisture decrease due to urbanization was more sensitive in the drought year (2001) than in the flood year (2003), We expect that the results of this research can contribute to providing useful information for managing urban rivers considering river restoration and flood control.

• 대한전자공학회논문지SD
• /
• 제38권6호
• /
• pp.412-419
• /
• 2001

본 논문에서는 유리집적광학을 이용하여 채널 도파로, Y-분리기, CWDM 등의 개별소자와 이들을 하나의 유리기판위에 평면형으로 집적하겨 제작함으로써 1.31/1.55㎛ CWDM(Coarse Wavelength Division Multiplexing) 및 1.55㎛ 대역 DWDM (Dense WDM) 수동 광 망에 적용할 수 있도록 하였다. CWDM에 적용한 결과, 1.55㎛ 파장에서는 30㏈, 1.31㎛ 파장에서는 15㏈ 이상의 교차 비를 얻을 수 있었다.

• 제어로봇시스템학회논문지
• /
• 제8권2호
• /
• pp.158-166
• /
• 2002

A mathematical model and dynamic characteristics ova continuously variable damper for semi-active suspen- sion systems are investigated. After analyzing the geometry of a typical continuously variable damper, mathematical models fur individual components including piston, orifices, spring, and valves are first derived and then the flow equations for extension and compression strokes are investigated. To verify the developed mathematical model, the dynamic response of the model are simulated using MATLAB/SIMULINK and are compared with experimental results. The proposed model can be used not only for mechanical components design but also for control system design.

• 소성∙가공
• /
• 제7권6호
• /
• pp.603-609
• /
• 1998

An aluminium sandwich sheet is the material fabricated by adhering two aluminum panels to one plastic core. When it has the same bending stiffness as an steel panel it is 65% lighter than steel panel and 30% lighter than aluminum panel. Therefore it is notified exclusively as good substitutive materials for steel body to improve fuel efficiency. An aluminium sandwich sheet, however, has a problem of the lower formability than steel in automotive application. In this paper we intend to develop application technologies of an aluminum sandwich sheet for auto body panels from selecting composed materials of aluminium sandwich sheets to fabricating prototype. We selected aluminium sandwich panels fabricated by Hoogovens company. Through formability tests we have designed the hood part on auto body panels and fabricated a mould and a prototype.