• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.824-829
• /
• 2011

EMS-type Maglev vehicle maintains constant levitation air-gap between electromagnet and guideway by using gap sensor. The other words, when Maglev vehicles levitating over the guideway, mass of the vehicle effects through 1st (electromagnetic air-gap control) and 2nd (air-spring) suspension to grider. Resonace between electromagnetic suspension and grider could be occurred, which causes instability and poor ridecomfort. This paper is to test the dymanic interaction between levitation air-gap and switching system grider that has less mass and high natural frequencies than other type of general girders.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1667-1673
• /
• 2015

The vibration and noise caused by the dynamic interaction between electromagnetic suspension and the linear synchronous motor stator beneath a flexible guideway remain problems in designing attractive Maglev trains. One possible method to reduce the sources of vibration is to minimize the detent force in the linear synchronous motor that creates variations in both lift force and thrust. This paper proposes lowering detent force by using separated core instead of single united core. The magnet is designed to adapt to the deflected guideway at a speed of 550km/h. This study will analyze the electromagnetic field and control performance, and how they relate to lift forces and dynamic responses.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.3
• /
• pp.82-88
• /
• 1997

In this paper, the development of a precision CNC lathe prototype for mirror surface machining is presented. To obtain high precision machining accuracy, a hydrostatically supported precision spindle and a sliding guideway with turcite pad are adopted as the motion elements. The machining accuracy of the prototype machine, and the motional accuracy of its motion elements are tested and evaluated to confirm the validity of the application of these elements on the prototype. The hydrostatic spindle shows 0.09 .mu. m of rotational accuracy and the guideway shows about 0.8 .mu. m/170mm of horizontal straightness. The sur- face roughness of cupper and aluminium cylinder machined by the prototype machine with diamond tool are 0.07 .mu. m and 0.10 .mu. m Rmax respectively. From these results, it is verified that the prototype lathe is avail- able for high precision machining.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.610-614
• /
• 1996

As the run out error and misalignment of ball screw connected directly to guide table largely affect the motion accuracy of guideway, floating coupling that releases the table from screw nut except feed and rotational direction is needed todecrease its influences. The purpose of this study is to propose a practical model floating coupling of ball serew for high precision feeding system. The straightness, dynanic characteristics and micro step response of hydrostatic guideway, mounted with three types of coupling fixed type, leaf spring type and hydrostatic type, are tested and compared. From the resuts of experiments, it is proved that a hydrostatic type floating coupling is superior to other couplings and is available to high precision feeding system with ball screw.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.203-204
• /
• 2009

The maglev guiderail systems, which receive directly the live load of maglev train and transfer the load to the main girder, is a important constituent in guideway system. As a process of development of maglev guideway girder adopting the precast decks, static and fatigue loading tests of the connections systems of precast deck and guiderail have been accomplished. In this stude, the structural characteristics of precast deck-guiderail connection systems are being evaluated by performing a detailed finite element analyses.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.3
• /
• pp.263-267
• /
• 2007

This study proposes a new methodology to estimate the traffic capacity of a personal rapid transit(PRT) system. The proposed method comprises three steps. The first step models the guideway network(GN) of PRT as a digraph, where its node and link represent a station and a one-way guideway link between two stations, respectively. Given local vehicle control strategies, the second step formulates the local traffic capacities through the nodes and links of the GN model. The third step estimates the worst-case local traffic demands based on a shortest-path routing algorithm and an empty vehicle allocation algorithm. By comparing the traffic estimates to the local traffic capacities, we can determine the feasibility of the given GN in traffic capacity.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.917-922
• /
• 2007

Electromagnetic suspension, the suspension system used for Maglev trains, is now being applied to urban and inter-city transportation systems, offering environmental benefits. This suspension system is actively controlled to stabilize the suspended vehicle as it runs over an elevated guideway, which, for various reasons, may have deviations in its height. For this reason, frequency responses of the suspension to height deviations must be predicted in the system design cycle. The equations of motion of the electromagnetic suspension employing the 5 state feedback control law are derived for frequency analysis. The results of this paper could be used to determine design requirements for the urban Maglev transportation system currently under development in Korea.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.653-660
• /
• 2006

In this paper, dynamic simulation results for modules of a magnetically-levitated(Maglev) vehicle are presented. The mathematical dynamic models for the Maglev vehicle are firstly derived. The Maglev system consists of one vehicle, two half-bogies, one guideway, four secondary suspensions, eight electromagnets and levitation control systems. Also, the dynamic characteristics are analysed by using the derived models. Finally, two simulations such as reference airgap step change of 1mm and rail step change of 1mm, are carried out. The dynamic simulation results are shown to testify the developed dynamic simulation program. From the results, we can see the possibility of the dynamic simulation program to develop a new Maglev vehicle system.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1103-1108
• /
• 2009

This paper describes the results of structural test and finite element analysis for rubber wheel-type Automatic Guideway Transit(AGT) made of aluminum honeycomb sandwich composites with WR580/NF4000 glass-fabric epoxy laminate face sheets. The static tests of vehicle structure were conducted according to JIS E7l05. These static tests have been done under vertical load, compressive load and 3-point support load. The structural integrity of AGT vehicle structure was evaluated by displacement, stress obtained from LVDT and strain gauges, and natural frequency. And finite element analysis using Ansys v11.0 was done to compare with the results of static test. The result showed that the results of structural integrity for static test were in an good agreement with these of finite element analysis.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.31-38
• /
• 1998

Guideway Transportation will provide the break-through to solve the traffic problems, which a lot of big cities have over the world. APM (Automated People Mover) system, Guideway Transportation, is classified by PRT, GRT, and MRT according to the capacity of passenger to be carried by its system. In the Application of PRT (Personal Rapid Transit) system, the enact analysis of the traffic problem on the area to be applied should be preceded. PRT system is characterized by Off-Line and Demand Operation. The Network of PRT system depends on the Load Time and Load Pattern. The operation of PRT system will have move efficient way when it is applied to the network with evenly distributed Load Time and Load Pattern.