• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.367-373
• /
• 2011

유도초음파를 활용한 진단 기술은 기존의 체적파를 이용한 진단 기법과 달리 장거리 진단의 장점 때문에 널리 사용된다. 대부분의 산업현장에서는 배관이 코팅되어 있거나 땅속이 묻혀있다. 이러한 경우 감쇠의 영향으로 기존의 방식으로는 진단에 어려움이 있다. 본 연구에서는 배관에서 전파되는 유도초음파 전파 모드별 음장을 직교모드확장기법을 이용하여 계산하였다. 단일 탐촉자에 의해 전파되는 유도초음파의 음장과 다중 탐촉자 모델링을 바탕으로 배관에서 전파되는 음장 특성을 해석하기 위해 유도초음파 모드별 집속 기술이 사용되었다. 추가적으로 배관에서 전파되는 유도초음파를 가진하는 탐촉자의 개수에 따른 집속 민감도가 종형 모드와 휨형 모드를 이용하여 계산되었다. 본 연구를 통하여 단일 탐촉자에 의해 가진된 유도초음파와 집속 알고리즘을 적용한 다중 탐촉자에 의해 가진된 음장을 비교하여 높은 에너지가 접속 되는 것을 확인 하였다.

• 비파괴검사학회지
• /
• 제24권6호
• /
• pp.597-602
• /
• 2004

유도초음파의 현장적응에 있어 전파모드를 규명하는 것은 매우 어렵지만 중요한 과제이다. 본 연구에서는 분산성이 적은 단일모드를 발생시키고 검출할 수 있는 기법에 대해 다루고 있으며, 현장 적용성과 자동화를 위해 비접촉식의 기법을 적용하였다. 모드 선택성을 강화한 비접촉식의 유도초음파 기법으로는 선배열 슬릿을 이용한 레이저빔을 이용하였으며, 에어커플 변환기를 수신자로 사용하였다. 선배열의 레이저 조명은 파장과 일치하여 특정한 모드를 발생시킬 수 있다 또한, 에어커플 변환기는 공기 중으로 누설되는 유도초음파를 수신각도를 조절하여 선택적으로 모드를 수신할 수 있다. 1mm 두께의 알루미늄 판에 덕 기법을 적용한 실험결과로부터 제안하는 기법의 유용성을 검증하였고, 특히 단일한 $a_0$모드의 발생 및 수신에 효과적인 기법으로 나타났다.

• Smart Structures and Systems
• /
• 제22권4호
• /
• pp.481-493
• /
• 2018

Ultrasonic guided waves have attracted increasing attention for non-destructive testing (NDT) and structural health monitoring (SHM) of bridge cables. They offer advantages like single measurement, wide coverage of acoustical field, and long-range propagation capability. To design defect detection systems, it is essential to understand how guided waves propagate in cables and how to select the optimal excitation frequency and mode. However, certain cable characteristics such as multiple wires, anchorage, and polyethylene (PE) sheath increase the complexity in analyzing the guided wave propagation. In this study, guided wave modes for multi-wire bridge cables are identified by using a semi-analytical finite element (SAFE) technique to obtain relevant dispersion curves. Numerical results indicated that the number of guided wave modes increases, the length of the flat region with a low frequency of L(0,1) mode becomes shorter, and the cutoff frequency for high order longitudinal wave modes becomes lower, as the number of steel wires in a cable increases. These findings were used in design of transducers for defect detection and selection of the optimal wave mode and frequency for subsequent experiments. A magnetostrictive transducer system was used to excite and detect the guided waves. The applicability of the proposed approach for detecting and locating wire breakages was demonstrated for a cable with 37 wires. The present ultrasonic guided wave method has been found to be very responsive to the number of brokenwires and is thus capable of detecting defects with varying sizes.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.159-169
• /
• 2017

This study aims to the increasing the reliability of gun firing system of patrol killer guided missile from failure mode analysis. In order to find out the breakdown parameter, the examination process of the sources of the problems and the quality improvement activities are analyzed with performance testing data. From this study, the rate of operation and the reliability of 76 mm naval guns will be increase. And the result of the study is expected to be used as a reference data in the naval gun firing system for another failure mode analysis.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.679-680
• /
• 2009

• 비파괴검사학회지
• /
• 제29권2호
• /
• pp.93-97
• /
• 2009

자기변형 탐촉자는 유도초음파를 적용한 장거리 배관 검사 시에 유용하게 사용되는데 특히 그 신호패턴이 배열형 압전탐촉자를 사용한 유도초음파 신호보다 깨끗하고 단순하기 때문에 단일 결함에 의한 신호패턴을 해석할 수 있을 뿐만 아니라 결함 신호의 진행 상황을 분석함으로써 배관의 구조 건전성 감시(structural health monitoring)에도 사용되고 있다. 그러나 실제 현장 검사에서는 유도초음파의 방향성신호, 잔향효과, 모드변환, 구조물 등에 의한 의사 신호 또는 거짓 신호가 나타나기 때문에 결함 평가 시에 주의를 요한다. 본 연구에서는 실제 상황을 모의한 장거리배관 mock-up에서 발생하는 모드변환 신호를 실험적으로 검증하고 해석하였다. 자기변형 스트립 탐촉자에서 발생한 비틀림진동 T(0,1) 모드와 휨진동 F(1,3) 모드 또는 종진동 L(0,2) 모드 간에 모드변환이 발생함을 확인하였고 이러한 모드변환이 발생하는 원인을 스트립 탐촉자 및 검사대상체의 전자기적 재료 특성 및 구조 측면에서 해석하였다.

• 비파괴검사학회지
• /
• 제27권3호
• /
• pp.239-245
• /
• 2007

A torsional guided wave mode in a tubular structure has many advantages in obtaining a higher sensitivity and lower attenuation for a defect, because it shows no dispersion characteristics and no radial displacement for a tubular structure. Many attempts have been made to excite and receive torsional guided waves by conventional piezoelectric transducers, but only a few examples are used during a practical field inspection. In this study, an array of electromagnetic acoustic transducers (EMATs) were for an excitation and reception of the torsional guided waves in a pipe was designed and fabricated. The signal patterns were analyzed based on various beam path length. The feasibility of detecting the defects was investigated through a series of experiments with artificial notches on a pipe.

• Journal of the Optical Society of Korea
• /
• 제18권4호
• /
• pp.377-381
• /
• 2014

Coupled guided modes, proposed in various modified hollow hexagonal cavities each attached internally to a hexagon, were demonstrated by investigating the laser oscillations in semiconductor cavities. The mode spacing between two adjacent lasing peaks decreased as the size of the internal hexagon increased, due to the increased round-trip length of the coupled guided modes. The linear dependency of the inverse mode spacing to the calculated round-trip length strongly confirmed the lasing of the coupled guided modes. The proposed modes in common-sized external cavities showed resonance structure that could be adjusted widely by controlling the size of the internal hexagon.

• 한국소음진동공학회논문집
• /
• 제19권9호
• /
• pp.876-883
• /
• 2009

The radiation of sound from a rectangular plate with a guided edge condition is investigated. By taking this particular boundary condition into account, simple analytical forms of the average radiation efficiency and radiation power based on the modal approach can be found, where the cross-modal terms can average out for all possible point excitation locations. Design variables of the plate such as thickness, aspect ratio, and damping that are closely related to the sound radiation are mainly discussed. The radiation power of the guided plate is found to be governed by the piston mode as well as the critical frequency. While both the radiation efficiency and the radiation power seem to be influenced by thickness and a large aspect ratio, damping loss factor seems less important to the radiation power. It is also shown that no clear corner and edge mode regions may be found for the guided case, unlike the pinned.

• 한국압력기기공학회 논문집
• /
• 제15권1호
• /
• pp.40-45
• /
• 2019

Unlike the welded pipes in the primary system of light water nuclear power plants being periodically inspected with in-Service inspection program, relatively small pipes with the outer diameter less than 2 inch have not been regularly inspected to date. However, after several failure reports on the occurrence of critical crack-like defects in small pipes, inspection for the small pipes has been more demanded because it could cause the provisional outage of nuclear power plants. Nevertheless, there's no particular method to examine the small pipes having access limitations for inspection due to various reasons; inaccessible area, excessive radiation exposure, hazardous surrounding, and etc. This study is to develop a reliable inspection technique using torsional and flexural modes of guided wave to detect defects that could occur in inaccessible area. The attribute of guided wave that can travel a long distance enables to inspect even isolated range of the pipe from accessible location. This paper presents a case study of the evaluation test on 3/4" small-bore pipes with guide wave method. The test result demonstrates the crack signal behavior and assures possibility to detect the crack signal in a flexural mode, which is clearly distinguishable from the symmetric structure signal in a torsional mode.