• Journal of radiological science and technology
• /
• v.29 no.1
• /
• pp.39-46
• /
• 2006

The rules and terms are described different meaning, in this results the research is accomplished for preventing practical workers from confusion. Atomic law are kept up modification and development in our situation by the ICRP's recommendation, on the other hand, the rules of diagnosis radiation equipment safety managements are modified partial, then resulted in confusion. The study was comparison between the rules of diagnosis radiation equipment safety management and atomic energy law, and the modification items obtained were as follows. 1. With each other different the terms and units are used. With the exception of special terms for affairs usage, it is needless to say that common term uniformity is standardized. The standardization of rules and guidance have not need to confusion radiological practical workers. 2. The following is omitted. 1) The radiation protection against tile patient and the hospital visitor. 2) Radiation dose limit of the woman patient who is in the process of becoming pregnant. 3) Radiation dose limit of the person who is not regarded as madical madical exposure. 4) The control of the exposure of pregnant of women at work.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.761-770
• /
• 2021

In order to establish an independent relationship between occupations in accordance with the abuse of doctor's orders and employment, the position of each physician and medical technician group, and the education system and laws of Japan, the United States, and England To promote the improvement of public health. The main differences in positions among related interest groups were analyzed, and the proposals and precedents of the National Assembly laws that were initiated after 1963 were analyzed and compared with the laws of developed countries. Among the OECD member countries, 26 countries except Korea have enacted a single law for medical technicians, and the meaning of instructions and supervision differs from country to country. The Medical Technician Act, etc., is inappropriate to apply the current and situation of the times as the laws of the 20th century to represent all the laws of the eight medical technicians. It is thought that a change in the word of direction and supervision under the control of the company is inevitable from a future-oriented horizontal perspective.

• Journal of Practical Engineering Education
• /
• v.13 no.2
• /
• pp.327-332
• /
• 2021

Materials used for education include SM20C, Al6061, and acrylic. SM20C materials are used a lot in certification tests and functional competitions as carbon steel, but they are also used in industrial sites. Al6061 is said to be a material that produces a lot of tools because it has lower hardness than carbon steel and is highly flexible. When practical guidance is given to students using acrylic materials, it is a material that causes vibration and tool damage due to excessive cutting. In this process, we examine how impact on the 5-axis equipment 2NC head can affect precision control. The weakest part of a five-axis equipment is the head that controls the AC axis. In the event of precision and cumulative tolerances in this area, the precision of all products is reduced. Thus, a key part of the 2NC head, the spindle housing was carried out using Al7075 T6 (U.S. Alcoasa) material and the entire body using FCD450 (spherical graphite cast iron). In the vibration and cutting process acting on these two materials, the analysis was carried out to determine the value of applying the force as a finite element analysis under extreme conditions. We hope that using these analytical data will help students see and understand the structure of 5-axis machining rather than 5-axis cutting.

• Journal of Ginseng Culture
• /
• v.1
• /
• pp.57-66
• /
• 2019

Ginseng has been recognized as a lifespan extending medicine which has been regarded as one of the medicines classified as top medicines, as the Boncho (medical herbs) study which is influenced by the idea of guidance's costume and food concept mainly in China is gaining its bona fide form. As the demand for ginseng has been expanded to other levels, the demand for ginseng has been increasing. Ginseng from the nature reached its supply chain limit due to its extinction and difficulty of picking, so it translated into ginseng cultivation of economy rather than harvesting in nature. After the start of ginseng cultivation, the ginseng cultivation was further enhanced by the rapid development of processing methods such as white-ginseng and red-ginseng, and the surge of consumption due to the traditional belief in ginseng drug efficacy and support of scientific research. In the Joseon Dynasty, the name Gasam (cultivated ginseng) had been created as ginseng was cultivated on farmland after the stage of SanYang (wild cultivated ginseng), the purpose of the new name Gasam is to differentiate from natural ginseng, and natural ginseng lost its firm position as the genuine ginseng as the Gasam replaced the genuine ginseng, and the natural ginseng got a new name of SanSam (wild ginseng). Because the real ginseng substance concept dissipated, and as Gasam is being called ginseng, the name Gasam was also disappeared. As a result, it was possible to grow large quantities according to the arrival of the Gasam era, and it was possible to supply the demand for ginseng, and it could become one agricultural industry. In this ginseng cultivation, in Japan where ginseng did not grow naturally, it was difficult to obtain ginseng from Joseon and faced with a shortage of ginseng at all times. Therefore, the shogun cultivated the Gasam systematically at the national level by the inside of the shogunate. However, since the natural ginseng is native to China and Korea, there is a concern about the deterioration of the quality of natural ginseng due to the incorporation of cultivated ginseng (Gasam). To protect the interests, the cultivation of ginseng was subject to control. For this reason, the lack of historical information on Gasam cultivation, which had to be started secretly, would be a natural result. In this paper, althouh not sufficient enough, the historical informations were used to summarize the history of ginseng cultivation in China, Japan and Korea.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.2
• /
• pp.107-113
• /
• 2019

In this paper, a robust filter based wind velocity estimation algorithm without an air velocity sensor in an air vehicle is presented. The wind velocity is useful information for the air vehicle to perform precise guidance and control. In general, the wind velocity can be obtained by subtracting an air velocity which is obtained by an air velocity sensor such as a pitot-tube, and a ground velocity which is obtained by a navigation equipment. However, in order to simplify the configuration of the air vehicle, the wind estimation algorithm is necessary because the wind velocity can not be directly obtained if the air velocity measurement sensor is not used. At this time, the aerodynamic coefficient of the air vehicle changes due to the turbulence, which causes the uncertainty of the system model of the filter, and the wind estimation performance deteriorates. Therefore, in this study, we propose a wind estimation method using $H{\infty}$ filter to ensure robustness against aerodynamic coefficient uncertainty, and we confirmed through simulation that the proposed method improves the performance in the uncertainty of aerodynamic coefficient.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.12
• /
• pp.1056-1069
• /
• 2018

In order to promote the commercial space activities of the private sector, the Trump Administration announced the commercial space regulatory reforms by issuing the Space Policy Directive-2 (SPD-2) on May 24, 2018, followed by the SPD-3 dealing with a separate issue of the space traffic management on June 18. Both executive orders, based on the recommendations prepared by the National Space Council (NSC) reconstituted in June 2017 and signed by the President, involve regulatory reform policy related to launch services, commercial remote sensing, establishment of one-stop shop office in Commerce Department, radio frequency spectrum, export control, and space traffic management, providing a strong guidance to the Federal Government. The commercial space regulatory reform policy can be seen in broader terms of the National Security Strategy earlier announced on Dec. 18, 2017, and as such, it pursues the economic growth of the U.S. and the national security as well. The U.S. law and policy prioritizing its national interests by promoting commercial space activities may lead to concerns and debate on the potential breach of the provisions of the Outer Space Treaty. Hence, it is worth noting the legal implications as derived from the U.S. space policy and domestic legislation, thereby accelerating international discussion to build on international norms as appropriate to the pr ogress of space technology and space commercialization.

• The Journal of the Korea Contents Association
• /
• v.21 no.1
• /
• pp.639-648
• /
• 2021

This study aimed to investigate the effects a strengths-based group counselling program had on self-esteem and career maturity of adolescents under probation. The subjects of the study were female adolescents under probation in Gwangju and were categorized into two groups: experiment group and control group consisting of 15 respectively. As a result, it was discovered that the strengths-based group counselling program had positive effects on enhancement of general and social self-esteem in the subjects while it did not have statistically significant effects on enhancement of family self-esteem. It indicates that positive relationship with parents and recovery of family functions should be encouraged to enhance the family self-esteem. Also, the strengths-based group counselling program had positive effects on planning, self-understanding, career knowledge and career preparation areas relating to career maturity while it did not have statistically significant effects on independence. It shows that to encourage the subjects to be independently prepared for career, family and society should provide more specific support for career guidance. Based on the results above, it was suggested that the strengths-based group counselling program had significant effects on self-esteem and career maturity of the subjects under probation. In conclusion, to encourage adolescents under probation to respect themselves and others, specifically plan their career and grow to be reliable and mature adults, further research on the strengths-based group counselling program is needed and diverse strategies including specific support through mentor service of college students should be developed.

• Journal of radiological science and technology
• /
• v.44 no.6
• /
• pp.671-677
• /
• 2021

Interest in the everyday hazards of radon has recently increased as such, this study attempted to examine the dangers of radon in spilled groundwater by comparing the radon concentrations of the drained groundwater and tap water used in recirculating systems in Incheon Subway restrooms. At five stations of Incheon Subway Line 1 and three stations of Line 2, drained groundwater is recirculated and used in restrooms for toilet flushing. Stations restroom tap water for hand washing that used as a control and the measured values of each were compared. With the cooperation of Incheon Transportation Corporation, samples of spilled groundwater and tap water were collected sealed to prevent contact with the air, and a DURRIDGE RAD7 was used as the experimental equipment. The collected samples were subjected to radial equilibration for approximately 3.5 h, at which the radon concentration reached its maximum, and then calculated as 10 measurements using the RAD7 underwater radon measurement mode. In all eight stations, the radon concentration in tap water was lower than the recommended amount. However, in an average of 7 out of the eight stations, the radon concentration in the effluent groundwater was 100 times higher than that in tap water. Since high radon concentrations in groundwater runoff can be harmful to humans, and there is no accurate standard for radon concentrations in domestic water, it is necessary to continuously monitor radon in water and prepare a guidance of recommended values.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.71-78
• /
• 2021

Purpose: To evaluate the inter-fractional position and respiratory reproducibility of lung and liver tumors using pressure conserving type(P-type) abdominal compressor in volumetric modulated arc therapy(VMAT). Materials and methods: Six lung cancer patients and three liver cancer patients who underwent VMAT using a P-type abdominal compressor were included in this study. Cone-beam computed tomography(CBCT) images were acquired before each treatment and compared with planning CT images to evaluate the inter-fractional position reproducibility. The position variation was defined as the difference of position shift values between target matching and bone matching. 4-dimensional cone-beam computed tomography(4D CBCT) images were acquired weekly before treatment and compared with planning 4DCT images to evaluate the inter-fractional respiratory reproducibility. The respiratory variation was calculated by the magnitude of excursions by breathing. Results: The mean ± standard deviation(SD) of overall position variation values, 3D vector in the three translational directions were 1.1 ± 1.4 mm and 4.5 ± 2.8 mm for the lung and liver, respectively. The mean ± SD of respiratory variation values were 0.7 ± 3.4 mm (p = 0.195) in the lung and 3.6 ± 2.6 mm (p < 0.05) in the liver. Conclusion: The use of P-type compressor in lung and liver VMAT was effective for stable control of inter-fractional position and respiratory variation by reproduction of abdominal compression. Appropriate PTV margin must be considered in treatment planning, and image guidance before each treatment are required in order to obtain more stable reproducibility

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.689-699
• /
• 2022

Recently, high productivity capabilities have been improved due to the application of advanced technologies in various industries, but in the construction industry, productivity improvements have been relatively low. Research on advanced technology for the construction industry is being conducted quickly to overcome the current low productivity. Among advanced technologies, 3D scan technology is widely used for creating 3D digital terrain models at construction sites. In particular, the 3D digital terrain model provides basic data for construction automation processes, such as earthwork machine guidance and control. The quality of the 3D digital terrain model has a lot of influence not only on the performance and acquisition environment of the 3D scanner, but also on the denoising, registration and merging process, which is a preprocessing process for creating a 3D digital terrain model after acquiring terrain scan data. Therefore, it is necessary to improve the terrain scan data processing performance. This study seeks to solve the problem of density inhomogeneity in terrain scan data that arises during the pre-processing step. The study suggests a 'pixel-based point cloud comparison algorithm' and verifies the performance of the algorithm using terrain scan data obtained at an actual earthwork site.